删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

考虑接触面局部散热的湿式离合器摩擦片滑摩温升特性

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
考虑接触面局部散热的湿式离合器摩擦片滑摩温升特性
Temperature Rise Characteristic of Friction Disc in Wet Clutch Considering the Local Heat Dissipation on the Contact Surface
投稿时间:2018-06-07
DOI:10.15918/j.tbit1001-0645.2019.09.008
中文关键词:湿式离合器温度场摩擦片摩擦因数
English Keywords:wet clutchtemperature fieldfriction discfriction coefficient
基金项目:国家自然科学基金资助项目(51575042,51775045)
作者单位
吴健鹏北京理工大学 机械与车辆学院, 北京 100081
莱斯大学 土木与环境工程学院, 休斯顿 77005, 美国
马彪北京理工大学 机械与车辆学院, 北京 100081
李和言深圳技术大学 城市交通与物流学院, 广东, 深圳 518118
刘继凯中国科学院微电子研究所, 北京 100029
摘要点击次数:774
全文下载次数:431
中文摘要:
湿式离合器摩擦元件摩擦温升状态与车辆性能息息相关.首先考虑沟槽冷却、接触面局部散热和摩擦因数实时变化,引入了副间等效对流换热系数和等效增益系数,优化了温度场数值模型.通过有限差分法进行求解,并试验验证了有效性,比原模型具有更高的准确性.在滑摩稳定期,应用滑摩温度场优化模型分析了转速、油压对温度场的影响规律.用试验方法研究了润滑流量对滑摩温升特性的影响规律,并测得了变形失效过程的温升特性变化.
English Summary:
The friction temperature rise state of friction components in wet clutch is closely related to vehicle performance. In this paper, a numerical model of temperature field was optimized, considering the groove cooling, local heat dissipation and time-varying friction coefficient on the contact surface, and introducing a heat exchange coefficient of equivalent convection between discs and an equivalent gain coefficient. The optimization model was solved and verified based on a finite difference method and experiment. Results show its better accurate and validity than the traditional model. During the stable period, the influence of rotational speed and oil pressure on the temperature field was also analyzed with an optimization model of the sliding temperature field. The influence of lubrication flow on the temperature rise characteristic of sliding friction was experimentally analyzed, and the temperature rise characteristics in deformation failure process were measured. The research results can provide a guiding for the fine simulation and control of the friction components in wet clutch.
查看全文查看/发表评论下载PDF阅读器
相关话题/北京 车辆 深圳 北京理工大学 机械