删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

轴向柱塞泵滑靴副动压承载特性研究

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
轴向柱塞泵滑靴副动压承载特性研究
Hydrodynamic Lubrication Characteristics of Slipper/Swash Plate Pair in Axial Piston Pumps-Theory and Experiment
投稿时间:2017-01-16
DOI:10.15918/j.tbit1001-0645.2018.03.002
中文关键词:滑靴副动压承载倾斜方位角
English Keywords:slipper/swash plate pairhydrodynamic lubricationtilting azimuth angle
基金项目:国家部委预研项目(VTDP3303)
作者单位E-mail
胡纪滨北京理工大学 车辆传动重点实验室, 北京 100081
赵红梅北京理工大学 车辆传动重点实验室, 北京 100081alyssa-zhao@163.com
荆崇波北京理工大学 车辆传动重点实验室, 北京 100081
摘要点击次数:1088
全文下载次数:744
中文摘要:
对轴向柱塞泵滑靴副稳态工况下动压承载规律展开了理论和试验研究,考虑了滑靴所受离心力等倾覆力矩的影响,结合了滑靴实际受力情况,建立了稳态工况下滑靴副摩擦动力学模型,研究了滑靴底面油膜动压承载规律.结果表明,滑靴与斜盘之间总是形成楔形收敛间隙,有利于滑靴副动压油膜的形成,滑靴倾斜方位角基本稳定在170°左右.试验结果较好地验证了仿真结果.
English Summary:
The hydrodynamic bearing ability of slipper/swash plate pair in axial piston pumps was studied under steady state. Considering the effect of centrifugal on the slipper tilt and analyzing the other forces on the slipper, a tribo-dynamic model of slipper/swash plate pair under steady condition was developed to study the law of hydrodynamic lubrication of oil film between the interfaces. The result shows that the gap between friction pair is always convergent wedged-shape and the tilting azimuth angle of slipper is around 170 degrees basically. This micro motion of slipper is helpful for the hydrodynamic lubrication film. The simulation result was testified well by the experiment.
查看全文查看/发表评论下载PDF阅读器
相关话题/北京 北京理工大学 车辆 中文 信息