删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

炮塔拆装台架变径设计与目标交互优化

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
炮塔拆装台架变径设计与目标交互优化
Research on Variable Diameter Design and Target Interaction Optimization of Turret Disassembling Platform
投稿时间:2017-04-05
DOI:10.15918/j.tbit1001-0645.2018.05.004
中文关键词:变径设计目标交互优化拓扑优化尺寸优化拆装台架
English Keywords:variable diameter designtarget interactive optimizationtopology optimizationsize optimizationdisassembling platform
基金项目:
作者单位E-mail
闫鹏程特种勤务研究所, 河北, 石家庄 050000
邵帅特种勤务研究所, 河北, 石家庄 050000
西北核技术研究所, 陕西, 西安 710024
m18632823040@163.com
孙江生特种勤务研究所, 河北, 石家庄 050000
张连武特种勤务研究所, 河北, 石家庄 050000
摘要点击次数:882
全文下载次数:574
中文摘要:
为解决现役各种自行火炮炮塔拆装台架通用性差、种类冗杂的问题,通过分析其尺寸需求,设计了一种变径炮塔拆装台架,为实现拆装台架的轻量化设计并提高台架刚强度,提出了拓扑优化和尺寸优化相结合的目标交互优化设计方法.首先,以台架最易发生破坏的托盘质量最小为优化目标,最大许用位移、许用应力为约束条件,单元密度为设计变量,对托盘进行拓扑优化;然后,对拓扑优化结果进行规整,以提高刚强度为优化目标,质量不增加为约束条件,重要尺寸参数为设计变量,对托盘进行尺寸优化.结果表明,优化后托盘质量由1 421 kg减为1 032 kg,结构刚强度均有较大幅度提高,并通过工装试验验证了优化结果的有效性.
English Summary:
In order to solve the problems of poor universal and miscellaneous types of existing various self-propelled gun turret assembling platforms, a variable diameter turret assembling platform was designed based on the analysis of their size requirements. To realize a lightweight design and improve the stiffness and strength of the platform, a method of target interaction optimization design based on topology optimization and size optimization was proposed. Firstly, setting the minimum quality of the tray, causing the platform damaged easily, as the optimal target, the maximum allowable displacement and the allowable stress as constraint conditions, the cell density as design variables, the topology optimization of the tray was carried out. Then the topology optimization results were regularized, and setting the improvement of stiffness and strength as the optimization target, no increasing quality as constraint conditions, the important size parameters as design variables, the size optimization of the tray was implemented. The results show that, the quality can be reduced from 1 421 kg to 1 032 kg after optimization, the structural stiffness and strength are greatly improved. The effectiveness of the optimized results is verified by tooling test.
查看全文查看/发表评论下载PDF阅读器
相关话题/优化 河北 研究所 设计 质量