删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

聚能射流水中侵爆盖板B炸药仿真研究

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
聚能射流水中侵爆盖板B炸药仿真研究
Simulation on Impact Initiation of Underwater Covered Composite B by Shaped Charge Jet
投稿时间:2018-12-01
DOI:10.15918/j.tbit1001-0645.2018.s2.014
中文关键词:聚能射流水中盖板装药起爆阈值
English Keywords:shaped charge jetunderwater covered chargeinitiation threshold value
基金项目:国家部委项目(2017YFC0822105)
作者单位
魏继锋北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
张亮北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
谢鑫河北燕兴机械有限公司, 河北, 张家口 075000
金子炎北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
杜志鑫北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
摘要点击次数:465
全文下载次数:195
中文摘要:
为获得聚能射流对水中盖板B炸药侵爆作用能力,开展水层厚度影响规律研究.基于准定常侵彻理论得到了紫铜聚能射流侵彻水介质时射流速度计算式;建立侵爆仿真模型,研究了聚能射流水中成型与运动、侵彻盖板及起爆装药的变化特性,计算给出了射流侵彻盖板前后的速度和直径的变化,结果表明,射流侵爆水中盖板B炸药的临界水层厚度为261 mm,并依据Held判据得出B炸药的起爆阈值为18.598 mm3·μs-2.研究结果对聚能射流水下毁伤技术的应用提供技术参考.
English Summary:
In order to obtain the capability of jet impacting and initiating underwater covered composite B, the effect of water layer thickness is studied. Based on quasi-steady penetration theory, the velocity expression of copper jet penetrating into aqueous medium is obtained. A penetrate-blast simulation model is established, and the movement, penetration and initiation of jet to different mediums are analyzed in detail. The velocity and diameter of jet before and after penetrating cover board are calculated. The simulation results show that the critical water layer thickness to initiate Composite B by jet is 261 mm, and the initiation threshold value of composite B is determined by Held to be 18.598 mm3·μs-2. The results may provide useful reference for underwater damage technology of shaped charge jet.
查看全文查看/发表评论下载PDF阅读器
相关话题/技术 北京理工大学 北京 实验室 科学