Qing TAO
(ÌÕÇì)


QingTAO, born in 1978, is currently an professor at Xinjiang University, China. He received his MSc degree from HuaZhong University of Science and Technology, China, in 2003, and received his PhD degree from Xinjiang University, China. His research interests include mechanical design,Human Modeling and Simulation, industrial design.


CV
Name and Address:Taoqing
School of Mechanical Engineering Xinjiang University
Yan'an Road No.1230,Urumqi, Xinjiang, China 830046
Tel.+86(0991)**,Mobile+86-**
E-mail:xjutao@qq.com
Higher Education: Center for Post-doctoral Studies of Mechanical Engineering, Urumqi, China
11/2015-11/2018
PHD in School of Mechanical Engineering, Xinjiang University, China
09/2009-06/2015
Study in BeiJing Language and culture University for one year
09/2009-07/2010
Master's Degree in Huazhong technique and science University, WuHan,China
09/2000-12/2003
Bachelor Degree in College of Mechanical Engineering, Xinjiang University, China
09/1995-07/1999
Work and Research Experience:
Professor, School of Mechanical Engineering, XinJiang University
2019--Present
Associate Professor, School of Mechanical Engineering, XinJiang University
2015--2019,
Academic visiting scholar, Department of Design, Brunel University.
09/2011-09/2012
Lecture, College of Mechanical Engineering, XinJiang University
12/2004-10/2015
Research Projects and Awards:
1. National Natural Science Foundation of China(Grant No.**), Research on parametric characterization method of motion pattern and the human machine cooperation mechanism of the upper-extremity neural rehabilitation robot.01/2019-12/2022,£¤400,000.Principal Investigator
2. University cooperation framework for knowledge transfer in central Asia, 2019/1-2021/12£¬(Grant No.598340-EPP-1-2018-1ES-EPPKA2-CBHE-JP)£¬899,842€.01/2019-12/2021 ) Co-Investigator
(Xinjiang University79,731 € ,Principal Investigator )
3. National Natural Science Foundation of China(Grant No.**), Base on virtual reality techniques testing and evaluating of work in sitting posture.01/2015-12/2018,£¤480,000. Principal Investigator
4. Xinjiang Provincial Natural Science Foundation of China. Digital Evaluation of Sitting Posture Comfort in Human-vehicle System. (Grant No. **C265), 01/2015-12/2017,£¤70,000. Principal Investigator
5. National key laboratory open fund project. Design of neural rehabilitation robot and rehabilitation training. (Grant No.sklms**) 03/2018-03/2020,£¤80,000. Principal Investigator
6. National outstanding postdoctoral general funding project. 01/2016-12/2017£¤30,000. Principal Investigator
7. National Natural Science Foundation of China(Grant No. **) Research on robot wheelchair based on vision tracking. 01/2013-12/2016,£¤460,000. Co-Investigator
8. National Natural Science Foundation of China (Grant No. **), The study of optimal matching mechanism of dual mode jet of torsion shock device, 01/2015- 12/2018,£¤470,000. Co-Investigator
9. 2015TAO Qing. The research on the theory and method of multidisciplinary coupling design for large wind turbines. The science and technology progress award of Xinjiang autonomous region. The second prize. Co-Investigator
10.2015TAO Qing. The excellent paper award of Xinjiang Uygur autonomous region. The first prize
11.2019TAO Qing. The excellent paper award of Xinjiang Uygur autonomous region. The second prize


publications
1. Tao Qing, KANG Jinsheng, SUN Wenlei, LI Zhaobo, and HUO Xiao (2016)Digital Evaluation of Sitting Posture Comfort in Human-vehicle System under Industry 4.0 Framework.Chinese Journal of Mechanical Engineering. Vol. 29,No. 6,2016, SCI.
2. Tao Qing, LI Zhaobo, KANG Jinsheng, Evaluation of human upper limb motion comfort based on motion capture system.24th International Conference on Automation & Computing (ICAC'18), Newcastle University, Newcastle upon Tyne, UK, 6-7 September 2018.(EI)
3. Tao Qing, KANG Jinsheng, SUN Wenlei, Wang shoudong, LI Zhaobo. Analysis of the sitting posture comfort based on motion capture system.The 23th International Conference on Automation and Control (ICAC'17), 2017.9.7-2017.9.8.(EI)
4. Tao Qing, WANG Shoudong, KANG Jinsheng, et al.Analysis of the sitting posture comfort based on motion capture system and JACK software[J]. Hydromechatronics Engineering, 2018.
5. Tao Qing, Sun wenlei, Jianxin Zhou. Research on Inherent Characteristics and Sensitivity of Planetary Gear Transmission. Journal of Xi¡¯an Jiaotong University, Vol.49 No.3,113-120. (EI: 20**1)
6. Tao Qing, Sun wenlei, Jianxin Zhou. Low-noise Optimization Method for Gearbox in Consideration of Operating Conditions. Hydromechatronics engineering£¬Vol.42,No.24:22-29.
7. Tao Qing, Sun wenlei,The study of large-scale wind turbine blade redesign system. Hydromechatronics engineering£¬2015,Vol.43,No.12:28-32.
8. Jianxin Zhou, Sun wenlei,Tao Qing. Gearbox Low-Noise Design Method Based on Panel Acoustic Contribution," Mathematical Problems in Engineering, vol. 2014, SCI:001.
9. Tao Qing, Jinsheng Kang£¬SUN Wenlei, Application of JACK on Evaluate of the split Seat chair£¬19th International Conference on Automation & Computing (ICAC'13). 2013,12,102-107.( EI:20**9)
10.Tao Qing, SUN Wenlei, SU Na, Jinsheng Kang£¬Custom mandible implant design based on rapid prototyping, 18th International Conference on Automation & Computing (ICAC'12). 2012,9,270-274.(EI:913)
11.Tao Qing, Jianxin Zhou, SUN Wenlei, Study on the Inherent Characteristics of Planetary Gear Transmissions,21th International Conference on Automation & Computing (ICAC'15). 2015,9,194-198.
12.Tao Qing, Sun wenlei. The study of large-scale wind turbine blade redesign system. Hydromechatronics engineering£¬2015,Vol.43,No.12:28-32.
13.SUN Wenlei, CAO Li,Tao Qing, The Design and Simulation of Beam Pumping Unit£¬21th International Conference on Automation & Computing (ICAC'15). 2015,9,295-298.
14.Li zhaobo,Tao Qing, Sun wenlei, Zhang kaituo, Ren jiaze. Evaluation and analysis of human sleeping posture comfort [J]. Modern manufacturing engineering, 2018,2:155-161.
15.Huo xiao, Sun wenlei,Tao Qing, kang jinsheng, li zhaobo, wang shoudong. Seat comfort test and evaluation based on sitting posture analysis [J]. Journal of engineering design,2017,24(3):286-294.
16.Li zhaobo,Tao Qing,Kang jinsheng, Sun wenlei, Zhang kaituo, Ren jiaze. Evaluation of human upper limb motion comfort based on motion capture technology [J]. Journal of engineering design, 2018,25(3):338-345.
17.Tao Qing, Sun Wenlei,Su Na,and KANG J. The implant design based on the lower jaw bone defect of the rapid prototyping technique. Machine Tool & Hydraulics,2015,No.06, pp 22-26
18.Tao Qing, Sun Wenlei, Kang J. and Yuan Liang. A seat comfort evaluation method based on optical motion capture technology. Journal of HeBei un,2015,No.05, pp 459-466


Patent:
As the first originator,Tao Qinghas applied for 15 national Patents.