shenjunqi@tju.edu.cn
未公开
副教授
焊接接头性能测试分析

---

自动送样装置设计等

---

Fe-36Ni/304L异种合金及Fe-36Ni/Fe-36Ni同种合金焊接性及焊接工艺研究

---

Ni36LNG焊丝熔敷试验分析

---

可移动式智能化焊接装备及技术研发

---

钢结构件机器人焊接系统研制

---

军工项目

---

激光深熔焊等离子体波动行为及焊缝成形检测原理的研究

---

铝合金TIG+CMT复合热源焊接成形与控制基础研究

---

激光熔覆FeMnCrNiCoAl系高熵合金组织与性能研究

---

石油平台消防系统功能设计与可靠性检测研究

---

CYW-1016垂直液压冷弯管机设计计算优化

---

变极性CMT+P焊接电弧行为与成形控制研究

---

军工项目

---

全位置电驱动龙门吊的强度和动力学仿真分析

---

军工项目

---

挖掘机配套吊管装置的仿真研究和有限元分析

---

Ni36LNG板材搭接钨极氩弧焊焊接工艺研究

---

军工项目

---

深水水下生产设施制造测试装备及技术项目

---

军工项目

---

海洋科研项目水下焊接及检验工艺关键技术研究项目-湿法和局部干法水下焊接专用机具及工艺研制工作

---

军工项目

---

球管相贯焊缝机器人焊接与控制基础理论研究

---

球管相贯焊缝机器人模拟仿真与控制基础理论研究
一种激光填丝焊焊丝校准装置

---

激光深熔点焊匙孔动态成形数值模拟方法

---

基于钨极氩弧焊与冷金属过渡焊接复合热源的焊接方法和应用

---

一种钨极氩弧焊与冷金属过渡焊接复合热源焊接设备

---

薄板激光焊接夹具的使用方法

---

利用焊条自动平焊装置进行焊接的方法

---

一种焊条自动平焊装置

---

一种焊条自动平焊装置的控制方法

---

一种用于精密箱型传感器焊接的定位工装夹具及其使用方法

---

一种适用于薄板激光焊接的夹具

---

激光填丝焊焊丝校准装置的使用方法

---

精密箱型传感器焊接定位工装夹具的使用方法

---

一种用于“J”型坡口焊接机器人的在线示教方法

---

一种用于铁素体不锈钢钨极氩弧焊的活性剂及其使用方法

---

一种钨极氩弧焊与冷金属过渡焊接复合热源焊接设备

---

一种用于精密箱型传感器焊接的定位工装夹具

---

一种适用于薄板激光焊接的夹具

---

一种焊条自动平焊装置
本发明公开了一种激光填丝焊焊丝校准装置。

---

本发明公开了激光深熔点焊匙孔动态成形数值模拟方法,利用FLUENT平台,通过对激光深熔点焊形成过程中的动量、能量方程设置源项,以模拟匙孔的动态成形过程。

---

11

---

111

---

11

---

11

---

本发明公开了一种焊条自动平焊装置主要由机架、焊条夹具、位置调节支架、焊条垂直运动机构、工件安放平台、水平二维运动平台组成,并通过主要由PLC、焊条短路回抽电路和弧压反馈电路组成的控制系统进行控制。

---

本发明公开了一种焊条自动平焊装置的控制方法,利用主要由机架、焊条夹具、位置调节支架、焊条垂直运动机构、工件安放平台、水平二维运动平台组成的自动平焊装置,并通过主要由PLC、焊条短路回抽电路和弧压反馈电路组成的控制系统进行控制。

---

本发明公开一种用于精密箱型传感器焊接的定位工装夹具及其使用方法。

---

本发明公开了一种适用于薄板激光焊接的夹具。

---

本发明公开激光填丝焊焊丝校准装置的使用方法。

---

11

---

本发明公开了一种用于“J”型坡口焊接机器人的在线示教方法。

---

本发明公开了一种用于铁素体不锈钢钨极氩弧焊的活性剂及其使用方法。

---

本实用新型提供一种钨极氩弧焊与冷金属过渡焊接复合热源焊接设备。

---

本实用新型公开一种用于精密箱型传感器焊接的定位工装夹具。

---

本实用新型公开了一种适用于薄板激光焊接的夹具。

---

本实用新型公开了一种焊条自动平焊装置主要由机架、焊条夹具、位置调节支架、焊条垂直运动机构、工件安放平台、水平二维运动平台组成，并通过主要由PLC、焊条短路回抽电路和弧压反馈电路组成的控制系统进行控制。
Microstructure and performance of the laser melted aluminum bronze layers with and without using activator

---

钛/铝异种金属冷金属过渡增材制造

---

丝材+电弧增材制造钛/铝异种金属反应层的研究

---

The effects of average power and pulse duration on weld characteristics, microstructure, mechanical properties and corrosion

---

Microstructure and mechanical properties of as-built and heat-treated Ti-6Al-4V alloy prepared by cold metal transfer additi

---

Microstructure and mechanical properties of wire and arc additive manufactured Ti-6Al-4V and AlSi5 dissimilar alloys using co

---

Microstructure and mechanical properties of Ti-22Al-25Nb/TA15 dissimilar joint fabricated by dual-beam laser welding

---

Microstructure and mechanical properties of 6061/7N01 CMT+P joints

---

盾构机部件机器人焊接工艺研究

---

Microstructure and mechanical properties of AISI 430 ferritic stainless steel joints fabricated by cold metal transfer weldin

---

Effects of ultrasonic vibration in the CMT process on welded joints of Al alloy

---

Effect of Ti on the microstructure evolution and wear behavior of VN alloy/Co-based composite coatings by laser cladding

---

Effects of ultrasonic peening treatment on surface quality of CMT-welds of Al alloys

---

Effect of TIG current on microstructural and mechanical properties of 6061-T6 aluminum alloy joints by TIG-CMT hybrid welding

---

Comparison of single-beam and dual-beam laser welding of Ti–22Al–25Nb/TA15 dissimilar titanium alloys

---

Characterization the contribution and limitation of the characteristic processing parameters in cold metal transfer depositio

---

Effect of duty cycle on microstructure and mechanical properties ofpulsed GTAW lap joint of Invar

---

Geometrical and microstructural characteristics of the TIG-CMT hybrid welding in 6061 aluminum alloy cladding

---

Effect of heat treatment on the microstructure and properties of VN alloy/Co-based composite coatings

---

Microstructure evolution and tribological properties of Co-based-VN alloy-Ti composite coatings by aging treatment

---

Effect of aging treatment on microstructure and properties of VN alloy reinforced Co-based composite coatings by laser claddi

---

Microstructure and mechanical behaviour of cold metal transfer welded Mg/Al dissimilar joint using wire AZ31 as filler metal

---

Microstructure, properties and weldability of duplex stainless steel 2101

---

Arc characteristics and metal transfer behavior of CMT+P welding process

---

Microstructure, mechanical property and corrosion resistance property of Cr26Mo3.5 super ferritic stainless joints by P-TIG a

---

Characterisation of precipitates formed in 26% Cr super ferritic stainless steel

---

Microstructure and mechanical properties of laser-welded joints of Ti-22Al-25Nb/TA15 dissimilar titanium alloys

---

Effect of Mo and nano-Nd2O3 on the microstructure and wear resistance of laser cladding Ni-based alloy coatings

---

Effects of Cr content on the microstructure and properties of 26Cr–3.5Mo–2Ni and 29Cr–3.5Mo–2Ni super ferritic stainless stee

---

Effects of annealing temperature on microstructure, mechanical properties and corrosion resistance of 30% Cr super ferritic s

---

Intermediate layer characterization and fracture behavior of laser-welded copper/aluminum metal joints

---

Microstructure, mechanical properties and corrosion behavior of laser welded dissimilar joints between ferritic stainless ste

---

Effects of electrode positive/negative ratio on microstructure and mechanical properties of Mg/Al dissimilar variable polarit

---

Effect of VN alloy addition on the microstructure and wear resistance of Co-based alloy coatings

---

Modeling of keyhole dynamics and analysis of energy absorption efficiency based on Fresnel law during deep-penetration laser

---

Dissimilar welding of H62 brass-316L stainless steel using continuous-wave Nd:YAG laser

---

The effect of peak power and pulse duration for dissimilar welding of brass to stainless steel

---

Effect of laser beam offset on microstructure and mechanical properties of pulsed laser welded BTi-6431S/TA15 dissimilar tita

---

Microstructures and mechanical properties of 30Cr-4Mo ferritic stainless steel joints produced by double-pulsed gas metal arc

---

Microstructures and mechanical properties of H62 brass-316L stainless steel in overlap welded joints by continuous-wave laser

---

An approach to the path planning of tube-sphere intersection welds with the robot dedicated to J-groove joints

---

Effects of microalloying and heat-treatment temperature on the toughness of 26Cr-3.5Mo super ferritic stainless steels

---

Sensitization of 21% Cr Ferritic Stainless Steel Weld Joints Fabricated With/Without Austenitic Steel Foil as Interlayer

---

Kinematic analysis and trajectory planning of J-groove welding robot

---

Correlation between process parameters and primary dendrite arm spacing in laser welding of Cu and Al

---

Activating flux design for laser welding of ferritic stainless steel

---

Effect of pulse frequency on microstructure of 21% Cr ferritic stainless steel in pulsed gas tungsten arc welding

---

基于支持向量机的Ｊ型坡口接头相贯线检测

---

激光焊接热输入对26Cr-3.5Mo 铁素体不锈钢组织性能的影响

---

退火工艺对26%Cr 超级铁素体不锈钢组织性能的影响

---

基于B 样条空间等距线的机器人轨迹优化算法

---

紫铜与316L不锈钢脉冲激光焊微观组织及力学性能

---

铜铝异种金属激光焊接头组织特征及力学性能

---

J形坡口焊接机器人运动控制系统设计

---

基于ANSYS二次开发的焊接温度场前处理系统

---

430铁素体不锈钢A-TIG焊接