huijun@uow.edu.au
材料学
天津市“****”****
教授
实验包层模块固相焊接关键技术及安全评价

---

ODS钢包层构件制备关键技术及连接可靠性研究

---

新型马氏体耐热钢焊材设计原则及焊接接头高温性能调控

---

复相氧化物弥散强化钢组织设计及其溶胶凝胶法制备工艺研究

---

高性能复合芯棒表面梯度强化层设计与制备

The effect of isothermal aging on microstructure and mechanical behavior of modified 2.5Al alumina-forming austenitic steel

---

Hot deformation of alumina-forming austenitic steel: EBSD study and flow behavior

---

EBSD analysis and mechanical properties of alumina-forming austenitic steel during hot deformation and annealing

---

Effects of Static Recrystallization and Precipitation on Mechanical Properties of 00Cr12 Ferritic Stainless Steel

---

Austenitizing Temperature Effects on the Martensitic Transformation, Microstructural Characteristics, and Mechanical Performa

---

A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)

---

Microalloying effects on microstructure and mechanical properties of 18Cr-2Mo ferritic stainless steel heavy plates

---

Precipitation and impact toughness of Nb-V stabilised 18Cr-2Mo ferritic stainless steel during isothermal aging

---

A Round-Robin Test with Thermal Simulation of the Welding HAZ to draw CCT diagrams: a need for harmonized procedures and micr

---

Effects of processing optimisation on microstructure, texture, grain boundary and mechanical properties of Fe-17Cr ferritic s

---

Feasibility Study of Low Force Robotic Friction Stir Process and its Effect On Cavitation Erosion and Electrochemical Corrosi

---

Microstructure and mechanical properties of friction stir welded 18Cr-2Mo ferritic stainless steel thick plate

---

Characterization of In-Situ Alloyed and Additively Manufactured Titanium Aluminides

---

Study on effect of strain rate on 3D surface asperity flattening in uniaxial planar compression by crystal plasticity finite

---

Microstructural Characterization of P91 Steel in the Virgin, Service Exposed and Post-Service Re-Normalized Conditions