工业催化
未公开
教授
高效化学能转化:中温燃料电池及快速离子传导材料
中温固体氧化物燃料电池复合电解质中离子传递机理及其与阳阴极反应相互作用的研究
废弃木质素高效转化为苯酚----一个大宗化学品和液体燃料平台化合物
木质素催化转化为高附加值化学品的研究
高能量密度非水氧化还原液流电池的研究
中温固体氧化物燃料电池电解质材料及制备工艺的开发
钙钛矿包裹水滑石基氧化物重整制氢催化剂
高纯度二氧化碳中低温催化氧化生成技术中试
生物质催化转化制备呋喃基化学品和苯酚的研究
一种固体氧化物燃料电池用的阳极材料及其制备方法和燃料电池
一种用于六碳糖脱水合成5-羟甲基糠醛的催化剂及合成5-羟甲基糠醛的方法
一种利用离子液体催化生成5-羟甲基糠醛的方法
一种铜锰复合氧化物催化剂及其制备方法和应用
一种铜锰复合氧化物催化剂及其制备方法和应用
一种使用棒状或粉末状碳燃料的碳燃料电池
一种中低温复合电解质及其制备方法和利用这种电解质的燃料电池
一种应用于合成吡啶碱的新型催化剂及其制备和使用方法
一种基于甲烷裂解和燃料电池的能源系统
一种以纳米材料为阳极的碳燃料电池
一种用于吸附二氧化碳中微量乙烯的吸附剂及其制备方法
A future solution as component in auxiliary power unit for eco-transportation
Sr2Fe2?xMoxO6?δ perovskite as an anode in a solid oxide fuel cell: Effect of the substitution ratio
Sr2Fe2?xMoxO6?δ perovskite as an anode in a solid oxide fuel cell: Effect of the substitution ratio
Enhancing the photoelectrochemical water splitting activity of rutile nanorods by removal of surface hydroxyl groups
Facet-selective charge carrier transport, deactivation mechanism and stabilization of a Cu2O photo-electro-catalyst
A SnO2-samarium doped ceria additional anode layer in a direct carbon fuel cell
Catalytic transformation of carbohydrates into 5-hydroxymethyl furfural over tin phosphate in a water-containing system
Autothermal reforming of ethanol in dense oxygen permeation membrane reactor
Kinetic and process study of ethanol steam reforming over Ni/Mg(Al)O catalysts: The initial steps
Improved photoelectrochemical property of a nanocomposite NiO/CdS@ZnO photoanode for water splitting
Effect of Carbon Dioxide on the Liquid Hot-Water Treatment of Lignocellulosic
Selective catalytic conversion of guaiacol to phenols over a molybdenum carbide catalyst
Improve electrical conductivity of reduced La2Ni0.9Fe0.1O4+δ as the anode of a solid oxide fuel cell by carbon deposition
Improve electrical conductivity of reduced La2Ni0.9Fe0.1O4+
A review on the Pd-based three-way catalyst
A review on the Pd-based three-way catalyst
Bifunctional polyacrylonitrile fiber-mediated conversion of sucrose to 5-hydroxymethylfurfural in mixed-aqueous systems
Common pathways in ethanolysis of Kraft lignin to platform chemicals over molybdenum-based catalysts
Templating sol-gel hematite films with sacrificial copper oxide: enhancing photoanode performance with nanostructure and oxyg
A ternary g-C3N4/Pt/ZnO photoanode for efficient photoelectrochemical water splitting
Preparation and NOx-assisted soot oxidation activity of a CuO–CeO2 mixed oxide catalyst
Ni-doped InN/GaZnON composite catalyst for overall water splitting under visible light irradiation
A non-aqueous all-cobalt redox ?ow battery using 1,10-phenanthrolinecobalt(II) hexafluorophosphate as active species
Effect of the calcination temperature on the performance of a CeMoOx catalyst in the selective catalytic reduction of NOx wit
Thermal conversion synthesis of Cu2O photocathode and the promoting effects of carbon coating
Investigation of chemical and electrochemical reaction mechanisms in a direct carbon fuel cell using olive wood charcoal as s
A tunable process: catalytic transformation of renewable furfural with aliphatic alcohols in the presence of molecular oxygen
Alumina supported molybdenum catalyst for lignin valorization: Effect of reduction temperature
N2O formation in the selective catalytic reduction of NOx with NH3 on a CeMoOx catalyst
Improve electrical conductivity of reduced La2Ni0.9Fe0.1O4+
The promotion effect of CeOx on Cu-SAPO-34 catalyst for selective catalytic reduction of NOx with ammonia
Attrition of catalyst particles in a laboratory-scale fluidized-bed reactor
Controlled surface properties of Au/ZSM5 catalysts and their effects in the selective oxidation of ethanol
A non-aqueous redox flow battery based on tris(1,10-phenanthroline) complexes of iron(II) and cobalt(II)
Facile fabrication of a highly active shell–core LaNi(Mg, Al)O3@Mg–Al catalyst for ethanol steam reforming
Catalytic Hydrothermal liquefaction of a microalga in a two-chamber reactor
Advanced three-component ZnO/Ag/CdS nanocomposite photoanode for photocatalytic water splitting
Single layer fuel cell based on a composite of Ce0.8Sm0.2O2?δ–Na2CO3 and a mixed ionic and electronic conductor Sr2Fe1.5Mo0.5
Highly efficient aerobic oxidation of biomass-derived 5-hydroxymethyl furfural to produce 2,5-diformylfuran in the presence o
Thin oriented AFI zeolite membranes for molecular sieving separation
Photocatalytic overall water splitting under visible light over an In–Ni–Ta–O–N solid solution without an additional cocataly
PdS-modified CdS/NiS composite as an efficient photocatalyst for H2 evolution in visible light
Production of phenols from catalytic conversion of lignin over a tungsten phosphide catalyst,
Catalytic Ethanolysis of Kraft Lignin into High‐Value Small‐Molecular Chemicals over a Nanostructured α‐Molybdenum Carbide Ca
Utilization of corn cob biochar in a direct carbon fuel cell
In depth investigation of an In-Ni-Ta-O-N photocatalyst for overall water splitting under sunlight
Synthesis and enhanced electrochemical performance of Sm-doped Sr2Fe1.5Mo0.5O6
Bond making and breaking between carbon, nitrogen and oxygen in electrocatalysis
Unsupported PVA and PVP stabilized Pd nanoparticles as catalyst for nitrite hydrogenation in aqueous phase
Cobalt sulfide quantum dots modified TiO2 nanoparticles for efficient photocatalytic hydrogen evolution
Evaluation of Ni/SDC as anode material for dry CH4 fuelled Solid Oxide Fuel Cells
2-D numerical modelling and experimental investigation of electrochemical mechanisms coupled with heat and mass transfer in a
Hydrolytic cleavage of C–O linkages in lignin model compounds catalysed by water-tolerant Lewis acids
Mechanical stability of monolithic catalysts: factors affecting washcoat adhesion and cohesion during preparation
Recent progress on solid oxide fuel cell: Lowering temperature and utilizing non-hydrogen fuels
Experimental investigation of direct carbon fuel cell fuelled by almond shell biochar: Part I. Physico-chemical characterizat
Experimental investigation of direct carbon fuel cell fuelled by almond shell biochar: Part II. Improvement of cell stabilit
Electrochemical oxidation of catalytic grown carbon fibre in a direct carbon fuel cell using Ce0.8Sm0.2O1.9-carbonate electro
Efficient photocatalytic hydrogen production from water over a CuO and carbon fibre comodified TiO2 nanocomposite photocataly
Sustainable H2 production from ethanol steam reforming over a macro-mesoporous Ni/Mg-Al-O catalytic monolith
Why (1 0 0) terraces break and make bonds: Oxidation of dimethyl ether on platinum single-crystal electrodes
Effect of Si/Al ratio and a secondary hydrothermal treatment on the properties of Al-MSU-S-FAU
The preparation and catalytic behaviour of a shell-core Ni/Mg-Al catalyst for ethanol steam reforming
Production of hydrogen and nanocarbon from catalytic decomposition of methane over a Ni-Fe/Al2O3 catalyst
Oxide ion and proton conduction in doped ceria–carbonate composite materials
Reaction kinetics of ethylene combustion in a carbon dioxide stream over a Cu?Mn?O hopcalite catalyst in low temperature ran
Transetherification of guaiacol to o-ethoxyphenol with gamma Al2O3 as a catalyst in supercritical ethanol
Polypropylene fiber supported ionic liquids for the conversion of fructose to 5-hydroxymethylfurfural under mild conditions
, Alumina supported Pt-Mo2C catalysts for the water-gas shift reaction
Electrochemical oxidation of graphite in an intermediate temperature direct carbon fuel cell based on two-phases electrolyte
Influences of environmental factors on lanthanum/aluminium-modified zeolite adsorbent (La/Al-ZA) for phosphorus adsorption fr
Enhancing the activity of a SiC-TiO2 composite catalyst for photo-stimulated catalytic water splitting
Green and efficient synthesis route of catechol from guaiacol
Recent progress on solid oxide fuel cell: Lowering temperature and utilizing non-hydrogen fuels
Enhancing the activity of a SiC-TiO2 composite catalyst for photo-stimulated catalytic water splitting
Oxide ion and proton conduction in doped ceria–carbonate composite materials
Thermodynamic analysis of hydrogen production for fuel cells from oxidative steam reforming of methanol
Tetrabutylammonium hexafluorophosphate and 1-ethyl-3-methyl imidazolium hexafluorophosphate ionic liquids as supporting elect
Validation of H+/O2?conduction in doped ceria–carbonate composite material using an electrochemical pumping method
Ionic conducting ceramic and carbonate dual phase membranes for carbon dioxide separation
The application of a non-aqueous bis(acetylacetone) ethylenediamine cobalt electrolyte in redox flow battery
Modification of Ni state to promote the stability of Ni–Al2O3 catalyst in methane decomposition to produce hydrogen and carbo
YBaCo4O7+δ sorbent for oxygen-enriched carbon dioxide stream production at a low-temperature
Catalytic growth of high quality single-walled carbon nanotubes over a Fe/MgO catalyst derived from a precursor containing Fe
Low temperature combustion of ethylene in a carbon dioxide stream over a cordierite monolith-supported Cu–Mn Hopcalite cataly
Quantifying multi-ionic conduction through doped ceria-carbonate composite electrolyte by a current-interruption technique an
Textural mesoporosity and opening frame network of mesoporous MOR zeolites synthesized under intensifying perturbation condit
Chemical treatment of CNTs in acidic KMnO4 solution and promoting effects on the corresponding Pd–Pt/CNTs catalyst
Chemical treatment of CNTs in acidic KMnO4 solution and promoting effects on the corresponding Pd–Pt/CNTs catalyst
Water assisted synthesis of double-walled carbon nanotubes with a narrow diameter distribution from methane over a Co–Mo/MgO
Electrochemical promotion of CO combustion over Pt/YSZ under high vacuum conditions
Interaction of amino acids and single-wall carbon nanotubes
Advanced electrolyte-free fuel cells based on functional nanocomposites of a single porous component: analysis, modelling and
An all perovskite direct methanol solid oxide fuel cell with high resistance to carbon formation at the anode
Synthesis of mesoporous MOR materials by varying temperature crystallizations and combining ternary organic templates
Direct CH4 fuel cell using Sr2FeMoO6 as an anode material
Regenerable and durable catalyst for hydrogen production from ethanol steam reforming
Defunctionalization of fructose and sucrose: Iron-catalyzed production of 5-hydroxymethylfurfural from fructose and sucrose
Effect of sublimation treatment on the catalytic performance of MFI catalysts in pyridine and 3-picoline synthesis
Performance of ionic-conducting ceramic/carbonate composite material as solid oxide fuel cell electrolyte and CO2 permeation membrane
Effect of intermediate layer on the activity and adhesion stability of metal monolith supported LaMn-hexaaluminate catalyst f
Synergy effect of MgO and ZnO in a Ni/Mg–Zn–Al catalyst during ethanol steam reforming for H2-rich gas production
Charles W. Monroe and Levi T. Thompson, Non-aqueous manganese acetylacetonate electrolyte for redox flow batteries
Methane decomposition to COx-free hydrogen and nano-carbon material on group 8-10 base metal catalysts: A review
Electrochemical promotion of CO combustion over non-percolated Pt particles supported on YSZ using a novel bipolar configurat
A Direct CH4 fuel cell using Sr2FeMoO6 as an anode material
Direct CH4 fuel cell using Sr2FeMoO6 as an anode material
Methane decomposition to Cox-free hydrogen and nano-carbon material on group 8-10 base metal catalysts: A review
Investigation on the structure and the oxidation activity of the solid carbon produced from catalytic decomposition of methan
Efficient and selective dehydration of fructose to 5-hydroxymethylfurfural catalysed by Br?nsted acidic ionic liquids
SrCo0.8Fe0.2O3?δ sorbent for high-temperature production of oxygen-enriched carbon dioxide stream
High efficiency chemical energy conversion system based on a methane catalytic decomposition reaction and two fuel cells: Par
High efficiency chemical energy conversion system based on a methane catalytic decomposition reaction and two fuel cells
Sequential simulation of dense oxygen permeation membrane reactor for hydrogen production from oxidative steam reforming of e
An efficient catalytic dehydration of fructose and sucrose to 5-hydroxymethylfurfural with protic ionic liquids
Biomass into chemicals: Conversion of sugars to furan derivatives by catalytic processes
Investigation of the Pt/YSZ interface at low oxygen partial pressure by solid electrochemical mass spectroscopy under high va
Solid electrochemical mass spectrometry (SEMS) for investigation of supported metal catalysts under high vacuum
Biomass into chemicals: Conversion of sugars to furan derivatives by catalytic processes
Palladium nanoparticles stabilized by an ionic polymer and ionic liquid: A versatile system for C-C cross-coupling reactions
Intermediate temperature fuel cell with a doped ceria-carbonate composite electrolyte
A carbon in molten carbonate anode model for a direct carbon fuel cell
Efficient and Selective Dehydration of Fructose to 5-Hydroxymethylfurfural Catalyzed by Brønsted Acidic Ionic Liquids
A direct carbon fuel cell with (molten carbonate)/(doped ceria) composite electrolyte
An efficient catalytic dehydration of fructose and sucrose to 5-hydroxymethylfurfural with protic ionic liquids
Non-aqueous chromium acetylacetonate electrolyte for redox flow batteries
Hydrogen separation through palladium–copper membranes on porous stainless steel with sol–gel derived ceria as diffusion barr
Intermediate temperature fuel cell with a doped ceria-carbonate composite electrolyte
Carbon dioxide reforming of methane over nickel-grafted SBA-15 and MCM-41 catalysts
A new composite micro/meso porous material used as the support of catalyst for polyaromatic compound hydrogenation
A carbon in molten carbonate anode model for a direct carbon fuel cell
A direct carbon fuel cell with (molten carbonate)/(doped ceria) composite electrolyte
Thermodynamic analysis of hydrogen production for fuel cell via oxidative steam reforming of propane
Effect of sequential desilication and dealumination on catalytic performance of ZSM-5 catalyst for pyridine and 3-picoline sy
Nitrile-functionalized pyrrolidinium ionic liquids as solvents for cross-coupling reactions involving in situ generated nanop
Investigation of the “permanent” electrochemical promotion of catalysis (P-EPOC) by electrochemical mass spectrometry (EMS) m
Quantifying electrochemical promotion of induced bipolar Pt particles supported on YSZ
Effect of Alkaline Treatment on the catalytic performance of ZSM-5 catalyst in pyridine and picolines synthesis
Solvent-enhanced coupling of sterically hindered reagents and aryl chlorides using functionalized ionic liquids
The Adsorption of L-phenylalanine on oxidized single-walled carbon nanotubes
A high performance composite ionic conducting electrolyte for intermediate temperature fuel cell and evidence for ternary ion
Catalytic oxidation of cyclohexane over ZSM-5 catalyst in N-alkyl-N-methylimidazolium ionic liquids
Analysis of oxygen permeation through dense ceramic membranes with chemical reactions of finite rate
Effect of metal-support interface on hydrogen permeation through palladium membranes
Effect of acid treatment on the high-temperature surface oxidation behavior of FeCrAlloy foil used for methane combustion cat
Influence of calcination temperatures of Feitknecht compound precursor on the structure of Ni-Al2O3 catalyst and the correspo
A FTIR and TPD examination of the distributive properties of acid sites on ZSM-5 zeolite with pyridine as a probe molecule
The Effect of H-2 on Chichibabin condensation catalyzed by pure ZSM-5 and Pt/ZSM-5 for pyridine and 3-picoline synthesis
Catalytic combustion of toluene over a copper-manganese-silver mixed-oxide catalyst supported on a washcoated ceramic monolit
Mesoporous Cu-Mn Hopcalite catalyst and its performance in low temperature ethylene combustion in a carbon dioxide stream
Non-aqueous vanadium acetylacetonate electrolyte for redox flow batteries
Production of hydrogen from methane decomposition using nanosized carbon black as catalyst in a fluidized-bed reactor
Performance of ionic-conducting ceramic/carbonate composite material as solid oxide fuel cell electrolyte and CO2 permeation
Modeling and analysis of carbon dioxide permeation through ceramic-carbonate dual-phase membranes
Effect of the sulfidation process on the mechanical properties of a CoMoP/Al2O3
Evidence of composition deviation of metal particles of a Ni-Cu/Al2O3 catalyst during methane decomposition to COx-free hydro
High-temperature stability of palladium membranes on porous metal supports with different intermediate layers
Preparation and characterization of Beta/MCM-41 composite zeolite with a stepwise-distributed pore
Adsorption of L-phenylalanine on single-walled carbon nanotubes
Thermodynamic analysis of hydrogen production from oxidative steam reforming of ethanol
Effect of magnesium substitution into LaMnAl11O19 hexaaluminate on the activity of methane catalytic combustion
Modeling and simulation of a single direct carbon fuel cell
The effect of sulfur compound on the hydrogenation of tetralin over a Pd-Pt/HDAY catalyst
Suzuki coupling reactions in ether-functionalized ionic liquids: The importance of weakly interacting cations
Enhanced activation and decomposition of CH4 by the addition of C2H4 or C2H2 for hydrogen and carbon nanotube production
Promoting effects of doping ZnO into coprecipitated Ni-Al2O3 catalyst on methane decomposition to hydrogen and carbon nanofib
Size effect on strength of alumina agglomerates
Biphasic hydrogenation over PVP stabilized Rh nanoparticles in hydroxyl functionalized ionic liquids
Optimization of the mechanical properties of a hydrotreating catalyst in the impregnating and drying processes
Palladium nanoparticles stabilized by an ionic polymer and ionic liquid: A versatile system for C-C cross-coupling reactions
Simulation of methane conversion to syngas in a membrane reactor. Part II model predictions
Simulation of methane conversion to syngas in a membrane reactor: Part I A model including product oxidation
Synthesis of pyridine and picolines over Co-modified HZSM-5 catalyst
Effect of alkaline and atom-planting treatment on the catalytic performance of ZSM-5 catalyst in pyridine and picolines synth
Vertically aligned carbon nanotube membranes on macroporous alumina supports
Steam reforming of ethanol over Co3O4/CeO2 catalysts prepared by different methods
Bamboo-shaped carbon nanotubes produced by catalytic decomposition of methane over nickel nanoparticles supported on aluminum
Physical activation and characterization of multi-walled carbon nanotubes catalytically synthesized from methane
Mechanical strength of solid catalysts: Recent developments and future prospects
MCM-41 overgrown on Y composite zeolite as support of Pd-Pt catalyst for hydrogenation of polyaromatic compounds
Preparation of thin palladium composit membranes and application to hydrogen/nitrogen separation
Preparation and characterization of a metal supported hexaaluminate composite catalyst for the combustion of methane
Unbiased estimation of Weibull parameters with the linear regression method
Distribution of the mechanical strength of solid catalysts
Methods for estimating Weibull parameters for brittle materials
Fabrication and growth mechanism of carbon nanotubes by catalytic chemical vapor deposition
Low-temperature synthesis of carbon onions by chemical vapor deposition using a nickel catalyst supported on aluminum
Characterization of zirconia modified porous stainless steel supports for Pd membranes
Tailoring the pore size of zeolite Y as the support of diesel aromatic saturation catalyst
Characterization and adsorption properties of porous carbon nanofiber granules
Study on purification and tip-opening of CNTs fabricated by CVD
Pressure drop across a fixed bed reactor with mechanical failure of catalyst pellets described by simplified Ergun’s equation
Statistical analysis of pellet size variation in commercial catalysts
Electroless plating synthesis, characterization and permeation properties of Pd-Cu membranes supported on ZrO2 modified porou
Synthesis of vertically aligned carbon nanotubes on macroporous alumina substrates
Mechanical strength and reliability of solid catalysts
Enhanced production of carbon nanotubes: combination of catalyst reduction and methane decomposition
COX-free hydrogen and carbon nanofibers production by decomposition of methane on Fe, Co and Ni metal catalysts
Hydrogen from stepwise reforming of methane: A process analysis with traditional routes
Production of hydrogen and carbon nanotubes from methane decomposition in a two-stage fluidized bed reactor
A charming science because of its complexity and usefulness
Synthesis of zeolite membrane
Improved estimation of Weibull parameters with the lenear regression method
Preparation of Ce-Zr-O solid sulotion
Production of COx-free hydrogen and nanocarbon by direct decomposition of undiluted methane on Ni–Cu–alumina catalysts
Chemical stability and its improvement of Pd-based metallic membranes
Carbon nanotubes with large cores produced by adding sodium carbonate to the catalyst
What causes the carbon nanotubes collapse in a chemical vapor deposition process
Effect of the mechanical failure of catalyst pellets on the pressure drop of a reactor
Optimal probability estimators for determineing Weibull parameters
Carbon nanotubes via methane decomposition on an alumina supported cobalt aerogel catalyst
Production of hydrogen and nanocarbon from direct decomposition of undiluted methane on high-nickeled Ni-Cu-alumina catalysts
Methane decomposition to carbon nanotubes and hydrogen on an alumina supported nickel aerogel catalyst
Effects of the calcination conditions on the mechanical properties of a PCoMo/Al2O3 hydrotreating catalyst
Catalytic synthesized carbon nanostructures from methane using nanocrystalline Ni
Effects of the number of testing specimens and the estimation methods on the Weibull parameters of solid catalysts
Formation of bamboo-shaped nanocarbon and dependence of its morphology on catalyst composition and reaction conditions
Microstructure and growth mechanism of bamboo-shaped carbon nanotubes
Measurement and statistics of single pellet mechanical strength of differently shaped catalysts
Effects of the impregnation and drying process factors on the mechanical properties of a PCoMo/Al2O3 hydrotreating catalyst
Extension of a model for bulk crushing strength of spheres to solid catalysts of different shapes
Simultaneous production of hydrogen and nanocarbon from decomposition of methane on a nickel-based catalyst
Understandings on the scattering property of the mechanical strength data of solid catalysts: A statistical analysis of iron-
Formation of bamboo-like nanocarbon and evidence for quasi-liquid state of nanosized metal particles at moderate temperatures
A model for the bulk crushing strength of spherical catalysts
The doping effect of copper on the catalytic growth of carbon fibers from methane over a Ni/Al2O3 catalyst prepared from Feit
Catalytic growth of carbon fibers from methane on a nickel-alumina composite catalyst prepared from Feitknecht compound precu
Optimising the mechanical strength of Fe-based commercial high-temperature water-gas shift catalyst in a reduction process
The possibility in Increasing the mechanical strength of Fe-based commercial WGS catalyst: Factors analysis in calcination pr
Competition between gas and surface reactions in the oxidative coupling of methane, 2. Isothermal experiments in a catalytic
A new "catalytic jet-stirred reactor" application to the study of the oxidative coupling of methane
Effect of abnormal treatment on the mechanical strength of iron based high temperature shift catalyst
228)Pascal Barbe, Yongdan Li, Paul-Marie Marquaire, Guy-Marie C?me and Fran?ois Baronnet, Competition between the gas and su
Kinetic study of the oxidative coupling of methane in a catalytic jet stirred reactor
The Oxidative coupling of methane and the oxidative dehydrogenation of ethane over a niobium promoted lithium doped magnesium
Factors analysis for mechanical strength in pelleting process of Fe-based high temperature shift catalyst