yefx@tju.edu.cn
材料加工
未公开
教授
XX系统

---

XX的可行性研究

---

XX部件工艺可靠性开发

---

XX防腐涂层的评价开发

---

等离子模拟

---

可控微循环诱导超声空化焊方法的关键技术与焊接机理

---

现场增材修复与再制造形性调控与移动式装备集成设计

---

XXX

---

基于爆炸焊和能量分配的HVAF 喷涂半熔化粒子共沉积理论与高结合强度

---

HVAF再制造涂层的纳微观组装机制及关键制备技术
WC-Co增强的铁基金属玻璃复合涂层成分及其制备方法

---

一种含有抗热腐蚀过渡底层的热障涂层及制备方法

---

一种热障涂层厚度的优化方法

---

测试涂层弹性模量的方法

---

具有多尺度WC晶粒的金属陶瓷涂层及制备方法

---

一种基于BP神经网络的再制造零件环境损耗的计算方法

---

一种WC-Co涂层的制备方法

---

一种工程机械液压缸活塞杆热喷涂再制造装备及自动修复控制系统

---

一种提高内燃机热效率的方法

---

具有富铝扩散层粘结层的陶瓷热障涂层及其制备方法

---

通过控制热生长氧化层成分延长发动机热障涂层寿命的方法
WC-Co增强的铁基金属玻璃复合涂层成分及其制备方法

---

一种含有抗热腐蚀过渡底层的热障涂层及制备方法

---

一种热障涂层厚度的优化方法

---

测试涂层弹性模量的方法

---

具有多尺度WC晶粒的金属陶瓷涂层及制备方法

---

一种基于BP神经网络的再制造零件环境损耗的计算方法

---

一种WC-Co涂层的制备方法

---

一种工程机械液压缸活塞杆热喷涂再制造装备及自动修复控制系统

---

一种提高内燃机热效率的方法

---

具有富铝扩散层粘结层的陶瓷热障涂层及其制备方法

---

通过控制热生长氧化层成分延长发动机热障涂层寿命的方法
Thermal analysis and failure behavior of 8YSZ thermal barrier coatings under thermal cycling tests

---

Enhancement on thermal shock resistance of TBCs with EP interlayer

---

Gas flow characteristics and particle impact behavior in high velocity oxygen/air fuel process

---

Influence of particulate cluster on mechanical properties of SiCp/Al-30Si composites

---

Toughening effect of Yb2O3 stabilized ZrO2 doped in Gd2Zr2O7 ceramic for thermal barrier coatings

---

Phase Structure Evolution and Thermo-Physical Properties of Nonstoichiometry Nd2-xZr2+xO7+x/2 Pyrochlore Ceramics

---

Effect of Si-incorporation on the structure, mechanical, tribological and corrosion properties of WSiN coatings

---

State of Residual Stress and Numerical Analysis of TGO in Plasma Sprayed 8YSZ Thermal Barrier Coating on QT500

---

Influence of sintering temperature on the mechanical properties and thermal expansion of SiCp/Al-30Si composites

---

Failure Analysis and Remanufacturing of Construction Machinery Shafts by HVOF Technique

---

Quantitative evaluation of the decarburization and microstructure evolution of WC–Co during plasma spraying

---

Effects of supersonic fine particles bombarding on thermal barrier coatings after isothermal oxidation

---

Laser surface remelting of Fe-based alloy coatings deposited by HVOF

---

APS制备Fe基非晶合金涂层工艺参数的统计分析

---

超音速微粒轰击处理对NiCoCrAlY粘结层高温氧化行为的影响

---

热障涂层材料的研究进展

---

Microstructures and properties of submicron structural WC-12Co coatings deposited by HVOF

---

离子喷涂制备铁基非晶合金涂层的结构及其耐腐蚀性能的研究

---

Dependence of photocatalytic activity on the compositions and photo-absorption of functional TiO2-Fe3O4 coatings deposited by plasma spray

---

Microstructure and oxidation behavior of Cr39Ni7C cermet coatings deposited by diamond jet spray process

---

Thermal analysis and failure behaviour of YSZ thermal barrier coatings on low heat rejection diesel engine piston

---

Phase Composition at the Interface and Its Residual Stress Evolution of Thermal Barrier Coatings

---

铝合金基体上含化学镀过渡层的二氧化锆热障涂层失效机制

---

铝合金基体上含化学镀过渡层的二氧化锆热障涂层失效机制

---

Laser Surface Remelting of Fe-based Alloy Coating Deposited by APS

---

Effects of non-stoichiometry on the mechanical properties of Nd2-xZr2+xO7+x/2 (X=0, 0.1, 0.2, 0.3, 0.4, 0.5) ceramics

---

Controlling the chemical composition of the interface thermally grown oxides to prolong the lifespan of thermal barrier

---

Influence of powder structure on decarburization and microstructure of HVOF sprayed WC-12wt.%Co

---

Residual stress evolution of thermally grown oxide in thermal barrier coatings deposited onto nickel-base super alloy

---

Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure

---

HVOF Spraying Process Optimization for the Deposition of Submicron Structural WC-12Co

---

Enhanced thermal expansion and fracture toughness of Sc2O3-doped Gd2Zr2O7 ceramics

---

Phase structure evolution and thermal expansion variation of Sc2O3 doped Nd2Zr2O7 ceramics

---

Temperature dependence of tribological properties of W2N/Cu coatings

---

Structure and wear performance of the atmospheric heat-treated HVOF sprayed bimodal WC-Co coating

---

Sliding wear behavior of HVOF sprayed WC-(nano-WC-Co) coating at elevated temperatures

---

Wear performance of the WC/Cu self-lubricating textured coating

---

Nanoindentation response analysis of TiN-Cu coating deposited by magnetron sputtering

---

The elevated-temperature wear behavior evolution of HVOF sprayed tungsten carbide coatings: Respond to heat treatment

---

Compared the oxidation behavior of TiN and TiN/W2N ceramic coatings during heat treatment

---

Comparison study on the oxidation behavior of WN and WCN ceramic coatings during heat treatment

---

A novel method to predict the highest hardness of plasma sprayed coating without micro-defects

---

Precipitation behaviors and properties of micro-beam plasma arc cladded CoCrFeMnNi high-entropy alloy at elevated temperature

---

Effect of medium temperature precipitation phase and Mn element diffusion mechanism on high temperature oxidation process of

---

Effect of Y2O3 addition on the microstructure and properties of Ni60 additives by micro-plasma cladding

---

The study of the tribological properties of TiAgN/W2N coatings in a wide temperature range

---

Effect of spraying parameters on the crystallinity and microstructure of solution precursor plasma sprayed coatings

---

Influence of the Cu addition on the tribological properties of HVOF sprayed bimodal WC-Co coating