yanyin@tju.edu.cn
动力机械及工程
教授
国家外专****

---

天津大学985人才计划

Structural influence of hydrophobic diamine in sulfonated poly(sulfide sulfone imide) copolymers on medium temperature PEM fu

---

Intrinsically Microporous Soluble Polyimides Incorporating Troger's Base for Membrane Gas Separation

---

Mixed gas sorption in glassy polymeric membranes: II. CO2/CH4 mixtures in a polymer of intrinsic microporosity (PIM-1)

---

Ion Transport by Nanochannels in Ion-Containing Aromatic Copolymers

---

Surface Plasmon Resonance Biomolecular Recognition Nanosystem: Influence of the Interfacial Electrical Potential

---

Polyethylene-based radiation grafted anion-exchange membranes for alkaline fuel cells

---

Durable Sulfonated Poly(arylene sulfide sulfone nitrile)s Containing Naphthalene Units for Direct Methanol Fuel Cells (DMFCs)

---

Towards High Conductivity in Anion-Exchange Membranes for Alkaline Fuel Cells

---

Polymer Rigidity Improves Microporous Membranes

---

Simulation of membrane-based CO2 capture in a coal-fired power plant

---

Proton-conducting membranes from poly(ether sulfone)s grafted with sulfoalkylamine

---

A capillary water retention effect to improve medium-temperature fuel cell performance

---

Poly(arylene ether) electrolyte membranes bearing aliphatic-chain-linked sulfophenyl pendant groups

---

Naphthalene-based poly(arylene ether ketone) anion exchange membranes

---

Towards High Conductivity in Anion-Exchange Membranes for Alkaline Fuel Cells

---

Molecular Motions of Adsorbed CO2 on a Tetrazole-Functionalized PIM Polymer Studied with C-13 NMR

---

Surface orientation of hydrophilic groups in sulfonated poly(ether ether ketone) membranes

---

Polyamide thin-film composite membranes based on carboxylated polysulfone microporous support membranes for forward osmosis

---

Morphological transformation during cross-linking of a highly sulfonated poly(phenylene sulfide nitrile) random copolymer

---

SPAEK-based binary blends and ternary composites as proton exchange membranes for DMFCs

---

Decarboxylation-Induced Cross-Linking of Polymers of Intrinsic Microporosity (PIMs) for Membrane Gas Separation

---

Chiral separation with molecularly imprinted polysulfone-aldehyde derivatized nanofiber membranes

---

Poly(arylene ether sulfone) proton exchange membranes with flexible acid side chains (vol 405, pg 68, 2012)

---

Advances in high permeability polymeric membrane materials for CO2 separations

---

Polymers of intrinsic microporosity (PIMs) substituted with methyl tetrazole

---

Electrospun nanofiber membranes from polysulfones with chiral selector aimed for optical resolution

---

A new class of highly-conducting polymer electrolyte membranes: Aromatic ABA triblock copolymers

---

A clustered sulfonated poly(ether sulfone) based on a new fluorene-based bisphenol monomer

---

Phenyltrimethylammonium Functionalized Polysulfone Anion Exchange Membranes

---

Poly(arylene ether sulfone) proton exchange membranes with flexible acid side chains

---

Densely Sulfophenylated Segmented Copoly(arylene ether sulfone) Proton Exchange Membranes

---

Guanidinium-Functionalized Anion Exchange Polymer Electrolytes via Activated Fluorophenyl-Amine Reaction

---

Influence of Intermolecular Interactions on the Observable Porosity in Intrinsically Microporous Polymers

---

Enhanced thermo-oxidative stability of sulfophenylated poly(ether sulfone)s

---

Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs)

---

Optical Resolution Membranes from Polysulfones Bearing Alanine Derivatives as Chiral Selectors

---

Sulfonated naphthalenic polyimides containing ether and ketone linkages as polymer electrolyte membranes

---

Fluorene-Based Poly(arylene ether sulfone)s Containing Clustered Flexible Pendant Sulfonic Acids as Proton Exchange Membranes

---

Interpretation of direct methanol fuel cell electrolyte properties using non-traditional length-scale parameters

---

Polymer nanosieve membranes for CO2-capture applications

---

Azide-based Cross-Linking of Polymers of Intrinsic Microporosity (PIMs) for Condensable Gas Separation

---

Polymers of Intrinsic Microporosity with Dinaphthyl and Thianthrene Segments

---

Preparation and DMFC performance of a sulfophenylated poly(arylene ether ketone) polymer electrolyte membrane

---

High performance direct methanol fuel cells based on acid-base blend membranes containing benzotriazole

---

Sulphonated Biphenylated Poly(aryl ether ketone)s for Fuel Cell Applications

---

Phase Separation and Water Channel Formation in Sulfonated Block Copolyimide

---

Polymer Electrolyte Membranes Derived from New Sulfone Monomers with Pendent Sulfonic Acid Groups

---

Enhancement of Proton Transport by Nanochannels in Comb-Shaped Copoly(arylene ether sulfone)s

---

Acid-base blend membranes consisting of sulfonated poly(ether ether ketone) and 5-amino-benzotriazole tethered polysulfone fo

---

Gas transport behavior of mixed-matrix membranes composed of silica nanoparticles in a polymer of intrinsic microporosity (PI

---

Radiation-grafted membranes based on polyethylene for direct methanol fuel cells