相册


基本信息 The basic information
姓名: 余剑峰

学院: 机电学院


学历: 博士研究生毕业

学位: 工学博士


职称: 副教授

职务:


学科: 航空宇航科学与技术





荣誉获奖 Awards Information
1. 复杂产品研制协同项目管理技术研究与应用, 2009, 陕西省科学技术二等奖, 排名第2。
2. 复杂产品装配工艺快速设计支持技术研究与应用，2007, 陕西省科学技术二等奖, 排名第7。



科学研究 Scientific Research
主要研究方向：装配与连接技术；计算机辅助技术；现代集成制造技术。
重点围绕复杂产品对象关联设计、基于三维模型的装配工艺快速规划以及数字量协调与容差分配等开展理论研究和工程实施。



学术成果 Academic Achievements
1. Yu Jianfeng, Xiao Hong. CAD model simplification for assembly field [J]. International Journal of Advanced Manufacturing Technology, 2013, 68(9-12):2335-2347. (SCI)
2. 余剑峰, 辛博, 郑堂介. 基于测量点自适应搜寻的法矢求解算法[J]. 计算机集成制造系统, 2013, 19(4):817-822. (EI)
3. 余剑峰,程晖,姚定,张开富.复杂产品装配顺序评价的路径反馈方法[J]. 西北工业大学学报, 2009, 27(1): 24~29. (EI)
4. Yu Jianfeng, Zhang Jie, Li Yuan. Priority Assessing Method for Aviation Multi-Project Based on Fuzzy Comprehensive Evaluation [C]. 2008 International Conference on Wireless Communications, Networking and Mobile Computing, WiCOM 2008. Dalian, China Oct 12-14: 468.(EI)
5. 余剑峰,李原,于海山,沈琴.基于自适应蚁群算法的协同制造项目资源优化配置[J].计算机集成制造系统, 2008, 14(3): 576-580. (EI)



学术文献 Academic Literature
1.An adaptive BPSO algorithm for multi-skilled workers assignment problem in aircraft assembly lines,EMERALD GROUP PUBLISHING LTD,2015,35(4),317-328 ,DOI:10.1108/AA-06-2015-051, ISSN:0144-5154
2.基于图论的飞机典型装配工艺数据挖掘方法,2015,51(20),116-119 ,DOI:, ISSN:1002-8331
3.Assembly modeling approach including assembly process information for mechanical product,INDERSCIENCE ENTERPRISES LTD,2007,,253-258 ,DOI:, ISSN:
4.A New Method for Generating Work Breakdown Structure on Aircraft Assembly Scheduling,IEEE,2008,,12985-12988 ,DOI:10.1109/WiCom.2008.3027, ISSN:
5.Priority Assessing Method for Aviation Multi-Project Based on Fuzzy Comprehensive Evaluation,IEEE,2008,,7764-7768 ,DOI:10.1109/WiCom.2008.1825, ISSN:
6.Research and Implementation of Assistant Knowledge Management System for Aircraft Product Design,IEEE COMPUTER SOC,2009,4,235-238 ,DOI:10.1109/ICICTA.2009.772, ISSN:
7.A Cooperative Method between Assembly Process Planning and Simulation for Complex Product,IEEE COMPUTER SOC,2009,,163-166 ,DOI:10.1109/I-ESA.2009.38, ISSN:
8.The Method of Multi-objective Integrated Progress Control on Aviation Project,IEEE COMPUTER SOC,2009,,10-14 ,DOI:10.1109/I-ESA.2009.40, ISSN:
9.A Dynamic Assembly Modeling Method for Satellite Final Assembly Sequence Planning,TRANS TECH PUBLICATIONS LTD,2011,156-157,332-338 ,DOI:10.4028/www.scientific.net/AMR.156-157.332, ISSN:1022-6680
10.Complex Maintenance of Aircraft Engine Structural Components using Genetic Algorithm and Multi-objective Optimization,TRANS TECH PUBLICATIONS LTD,2011,44-47,2988-2992 ,DOI:10.4028/www.scientific.net/AMM.44-47.2988, ISSN:1660-9336
11.An Obstacle Avoidance Method Based on Distance Fields in C-space for Virtual Arm,TRANS TECH PUBLICATIONS LTD,2012,591-593,827-831 ,DOI:10.4028/www.scientific.net/AMR.591-593.827, ISSN:1022-6680
12.An Assembly Process Model Involved Resource for Complex Products,TRANS TECH PUBLICATIONS LTD,2013,268-270(PART 1),845-850 ,DOI:10.4028/www.scientific.net/AMM.268-270.845, ISSN:1660-9336
13.Cell Layout of Aircraft Assembly System Based on Sequence Pair,TRANS TECH PUBLICATIONS LTD,2013,271-272(PART 1),801-805 ,DOI:10.4028/www.scientific.net/AMM.271-272.801, ISSN:1660-9336
14.A Method for Associated Design Based on Skeleton Model,TRANS TECH PUBLICATIONS LTD,2013,271-272(PART 1),737-741 ,DOI:10.4028/www.scientific.net/AMM.271-272.737, ISSN:1660-9336
15.复杂产品系统的风险管理实现研究,2009,(9),94-97 ,DOI:10.3969/j.issn.1671-833X.2009.09.015, ISSN:1671-833X
16.飞机装配设计伴随知识库系统的研究与实现,2009,(20),76-79 ,DOI:10.3969/j.issn.1671-833X.2009.20.014, ISSN:1671-833X
17.考虑拆卸操作复杂性的拆卸顺序优化方法,2011,(4),94-97 ,DOI:10.3969/j.issn.1671-833X.2011.04.018, ISSN:1671-833X
18.一种基于关键特性识别的综合成本公差优化模型,2012,47(4),79-81 ,DOI:10.3969/j.issn.1672-0121.2012.04.027, ISSN:1672-0121
19.基于多级骨架模型的关联设计方法研究,2013,48(4),94-98 ,DOI:10.3969/j.issn.1672-0121.2013.04.031, ISSN:1672-0121
20.基于平面度公差映射的统计公差分析方法,2014,(13),78-80,88 ,DOI:10.3969/j.issn.1009-0134.2014.07(上).22, ISSN:1009-0134
21.一种面向薄壁件装配的公差优化分配方法,2014,(16),97-99 ,DOI:10.3969/j.issn.1009-0134.2014.16.025, ISSN:1009-0134
22.A posture evaluation method for aircraft wing based on a simple measurement system,SAGE PUBLICATIONS LTD,2013,227(B4),627-630 ,DOI:10.1177/4248, ISSN:0954-4054
23.CAD model simplification for assembly field,SPRINGER LONDON LTD,2013,68(9-12),2335-2347 ,DOI:10.1007/s00170-013-4850-z, ISSN:0268-3768
24.CAD mesh model simplification with assembly features preservation,SCIENCE PRESS,2014,57(3),1-11 ,DOI:10.1007/s11432-013-4791-z, ISSN:1674-733X
25.A systematic top-down approach for the identification and decomposition of product key characteristics,SAGE PUBLICATIONS LTD,2014,228(10),1305-1313 ,DOI:10.1177/6303, ISSN:0954-4054
26.A multi-factor revision based analysis of the personnel operational capacity of aircraft assembly lines,SPRINGER LONDON LTD,2015,78(1-4),211-220 ,DOI:10.1007/s00170-014-6658-x, ISSN:0268-3768
27.Dynamic assembly simplification for virtual assembly process of complex product in cloud computing environment,SAGE PUBLICATIONS LTD,2014,228(10),1198-1213 ,DOI:10.1177/1191, ISSN:0954-4054
28.一种考虑物流方式的飞机装配作业单元布局方法,2013,48(4),98-102 ,DOI:10.3969/j.issn.1672-0121.2013.04.032, ISSN:1672-0121
29.Multi-objective Optimization Method for Automatic Drilling and Riveting Sequence Planning,ELSEVIER SCIENCE INC,2010,23(6),734-742 ,DOI:10.1016/S1000-9361(09)60276-4, ISSN:1000-9361
30.压铆过程阶段划分与压铆力计算,2009,28(4),514-516,521 ,DOI:, ISSN:1003-8728
31.遗传算子分阶段模糊调控在装配规划中的应用,2010,29(12),1658-1662 ,DOI:, ISSN:1003-8728
32.支持变约束的装配顺序随需式规划方法,Editorial Office of Chinese Journal of Mechanical, 22 Baiwanzhuang Dajie, Beijing, 100037, China,2011,47(5),149-155 ,DOI:10.3901/JME.2011.05.149, ISSN:0577-6686
33.基于积分映射的轮廓度公差建模与分析,CIMS,2014,20(4),771-778 ,DOI:10.13196/j.cims.2014.04.chenjiao.0771.8.**, ISSN:1006-5911
34.产品关键特性量化鉴别与分解方法应用研究,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2011,17(11),2383-2388 ,DOI:, ISSN:1006-5911
35.基于关系对象Petri网的飞机装配系统模型快速构建方法,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2010,16(6),1195-1201 ,DOI:, ISSN:1006-5911
36.飞机装配作业单元生产能力的马尔可夫分析方法,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2010,16(9),1844-1851 ,DOI:, ISSN:1006-5911
37.基于测量点自适应搜寻的法矢求解算法,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2013,19(4),817-822 ,DOI:, ISSN:1006-5911
38.复杂产品装配顺序评价的路径反馈方法,Northwestern Polytechnical University, Xi'an, 710072, China,2009,27(1),24-29 ,DOI:10.3969/j.issn.1000-2758.2009.01.005, ISSN:1000-2758
39.基于遗传蚁群算法的复杂产品装配顺序规划方法,Northwestern Polytechnical University, Xi'an, 710072, China,2009,27(1),30-38 ,DOI:10.3969/j.issn.1000-2758.2009.01.006, ISSN:1000-2758
40.基于装配指令的飞机装配作业工作结构分解快速生成算法,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2009,15(2),333-338 ,DOI:, ISSN:1006-5911
41.基于虚拟配合面的带平面度零件装配容差分析,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2011,17(4),711-715 ,DOI:, ISSN:1006-5911
42.Assembly model based on dynamic transition graph for satellite general assembly process planning,Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany,2012,430-432,1542-1545 ,DOI:10.4028/www.scientific.net/AMR.430-432.1542, ISSN:99
43.Knowledge application techniques in assistant knowledge base system for product design,IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States,2009, ,DOI:10.1109/ICMSS.2009.**, ISSN:91
44.A study of mapping the planeness to dimension chain for assembly tolerance analysis,IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States,2010,1,352-356 ,DOI:10.1109/ICMTMA.2010.768, ISSN:21
45.Path Planning algorithm for Assembly of complex product based on V-Map and ant colony optimization algorithm,IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States,2010,5,V5398-V5402 ,DOI:10.1109/ICACTE.2010.**, ISSN:08
46.Optimal assembly tolerance design based on fuzzy information entropy and seeker optimization algorithm,IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States,2010,5,V5610-V5613 ,DOI:10.1109/ICACTE.2010.**, ISSN:08
47.Producing performance analysis method for aircraft assembly unit based on Markov chain,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2010,16(9),1844-1851 ,DOI:, ISSN:**
48.A new posture evaluation method of wing based on iterative closest point algorithm,Trans Tech Publications Ltd, Kreuzstrasse 10, Zurich-Durnten, CH-8635, Switzerland,2013,718-720,1279-1285 ,DOI:10.4028/www.scientific.net/AMR.718-720.1279, ISSN:68
49.Sequence planning of aircraft frame assembly in China,Northwestern Polytechnical University,2001,19(2),195-199 ,DOI:, ISSN:**
50.Application of quantitative identification and decomposition methods for product key characteristics,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2011,17(11),2383-2388 ,DOI:, ISSN:**
51.Knowledge acquisition and representation of multiple information sources for aircraft tooling design,IEEE Computer Society, 2001 L Street N.W., Suite 700, Washington, DC 20036-4928, United States,2012,1,280-284 ,DOI:10.1109/IHMSC.2012.77, ISSN:13
52.Normal Vector solving algorithm based on adaptive searching for measuring points,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2013,19(4),817-822 ,DOI:, ISSN:**
53.Assembly model based on design process and assembly process,Northwestern Polytechnical University,2000,18(4),503-507 ,DOI:, ISSN:**
54.Path feedback method for evaluating the assembly sequence of complex products,Northwestern Polytechnical University, Xi''an, 710072, China,2009,27(1),24-29 ,DOI:, ISSN:**
55.Fast work breakdown structure generation algorithm for aircraft assembly scheduling based on assembly order,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2009,15(2),333-338 ,DOI:, ISSN:**
56.基于随机测量点的机翼精加工位姿计算方法,2015,(6),72-76,79 ,DOI:10.16080/j.issn1671-833x.2015.06.072, ISSN:1671-833X
57.Rapid modeling method for aircraft assembly system based on relation-based object Petri nets,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2010,16(6),1195-1201 ,DOI:, ISSN:**
58.Assembly sequence unconventionality planning method based on genetic algorithms and gray theory for complex products,IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States,2012,,167-171 ,DOI:10.1109/ISdea.2012.388, ISSN:87
59.Numerical analysis based on the pressure bulkhead of the multi-objective optimization,IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States,2010,2,187-190 ,DOI:10.1109/ICIII.2010.209, ISSN:99
60.Optimization of tolerance allocation with consideration of assembly deformation and quality loss,Springer Verlag, Tiergartenstrasse 17, Heidelberg, D-69121, Germany,2013,216 LNEE(VOL. 1),631-638 ,DOI:10.1007/978-1-4471-4856-2_76, ISSN:55
61.Hierarchical progressive object model of 3D assembly process micro-planning for complex product,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2011,17(4),701-710 ,DOI:, ISSN:**
62.Assembly tolerance analysis for parts with flatness based on virtual mating plane,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2011,17(4),711-715 ,DOI:, ISSN:**
63.Distributed collaborative platform of product designing based on grid portal,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2007,13(12),2294-2300+2308 ,DOI:, ISSN:**
64.Integrated model for aircraft assembly process planning and simulation under 3D environment,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2012,18(6),1158-1167 ,DOI:, ISSN:**
65.基于装配修正树模型的飞机装配容差分析,2001,,492-494 ,DOI:, ISSN:
66.Efficient GAAA-based assembly sequence planning method for complex products,Northwestern Polytechnical University, Xi''an, 710072, China,2009,27(1),30-38 ,DOI:, ISSN:**
67.Resources optimization deployment in collaborative manufacturing project based on adaptive ant colony algorithm,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2008,14(3),576-580 ,DOI:, ISSN:**
68.Research on assembly simulation based on operation models,Northwestern Polytechnical Univ, Xi''an, China,2000,19(3),503-504, 507 ,DOI:, ISSN:**
69.Application of artificial neural networks in turbomachinery optimization,IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States,2010,3,776-781 ,DOI:10.1109/ICICISYS.2010.**, ISSN:35
70.RETRACTED ARTICLE: Knowledge active push based on personalized interest model in aircraft structure design,IEEE Computer Society,2011,,2338-2341 ,DOI:10.1109/ICEBEG.2011.**, ISSN:46
71.飞机部件装配的路径规划算法研究与实现,1999,(12),18-20 ,DOI:, ISSN:1005-8990
72.基于Web Services的船舶异地协同设计设备资源库设计,2005,,16-21 ,DOI:, ISSN:
73.基于Portal的船舶异地协同设计系统集成框架研究,2005,,10-15 ,DOI:, ISSN:
74.基于动态变迁图的卫星总装规划建模技术研究,2014,(22),30-34 ,DOI:10.3969/j.issn.1671-833X.2014.22.006, ISSN:1671-833X
75.基于图论的飞机典型装配工艺数据挖掘方法,2014,(20),116-119 ,DOI:10.3778/j.issn.1002-8331.1310-0105, ISSN:
76.A Study of Selective Assembly for Product with Multi Mating Features,TRANS TECH PUBLICATIONS LTD,2011,44-47,499-505 ,DOI:10.4028/www.scientific.net/AMM.44-47.499, ISSN:1660-9336
77.Dynamic assembly simplification for virtual assembly process of complex product,EMERALD GROUP PUBLISHING LIMITED,2014,34(1),1-15 ,DOI:10.1108/AA-12-2012-093, ISSN:0144-5154
78.产品数据管理技术研究,1999,17(3),428 ,DOI:, ISSN:1000-2758
79.基于知识的装配顺序规划优化方法,2009,20(21),2571-2574 ,DOI:, ISSN:1004-132X
80.飞机装配线人员生产能力的解算方法,2014, ,DOI:, ISSN:
81.一种基于交互特征偶的产品建模方法,2013, ,DOI:, ISSN:
82.面向通用设计结构发掘的装配模型定量描述方法,2013, ,DOI:, ISSN:
83.一种自动制孔的压紧装置,2012, ,DOI:, ISSN:
84.一种机翼精加工姿态计算方法,2012, ,DOI:, ISSN:
85.一种变间距自适应搜寻测量点的飞机壁板法矢确定方法,2012, ,DOI:, ISSN:
86.一种测量自由曲面任意点处法向矢量的装置,2011, ,DOI:, ISSN:
87.一种测量自由曲面任意点处法向矢量的装置及其测量方法,2011, ,DOI:, ISSN:
88.一种确定自由曲面上任意点处法向矢量的方法,2011, ,DOI:, ISSN:
89.？？3-Subdivision wavelets for sharp features preservation,Springer Verlag,2014,8360,115-129 ,DOI:10.1007/978-3-642-54212-1-6, ISSN:**
90.复杂产品三维装配工艺微规划层进对象模型,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2011,17(4),701-710 ,DOI:, ISSN:1006-5911
91.基于设计和装配过程的装配模型研究,Northwestern Polytechnical University,2000,18(4),503-507 ,DOI:10.3969/j.issn.1000-2758.2000.04.001, ISSN:1000-2758
92.基于VMap的装配路径规划研究与实现,2001,19(1),118-121 ,DOI:10.3969/j.issn.1000-2758.2001.01.029, ISSN:1000-2758
93.飞机结构件装配顺序规划研究与实现,Northwestern Polytechnical University,2001,19(2),195-199 ,DOI:10.3969/j.issn.1000-2758.2001.02.009, ISSN:1000-2758
94.制造项目搭接网络制定的启发式方法,2009,37(1),5-8 ,DOI:10.3969/j.issn.1001-3881.2009.01.002, ISSN:1001-3881
95.弱化PERT网关键路径算法研究,2006,23(1),31-33 ,DOI:10.3969/j.issn.1001-3695.2006.01.010, ISSN:1001-3695
96.船舶异地协同设计设备资源库设计,2006,28(1),50-53 ,DOI:10.3969/j.issn.1000-6982.2006.01.016, ISSN:1000-6982
97.基于组件应用框架的装配工艺规划系统开发,2006,(9),94-97 ,DOI:10.3969/j.issn.1671-833X.2006.09.019, ISSN:1671-833X
98.面向飞机装配结构的层级网络模型,2005,(6),74-76 ,DOI:10.3969/j.issn.1671-833X.2005.06.015, ISSN:1671-833X
99.基于操作模型的装配仿真技术研究,Northwestern Polytechnical Univ, Xi'an, China,2000,19(3),503-504,507 ,DOI:10.3321/j.issn:1003-8728.2000.03.057, ISSN:1003-8728
100.基于Portal船舶异地协同设计系统集成框架研究,2005,22(6),6-11 ,DOI:10.3969/j.issn.1005-8354.2005.06.011, ISSN:1005-8354
101.电子样机装配仿真系统总体设计及关键算法研究,1998, ,DOI:, ISSN:
102.NC机床评价系统中机床稳定性模糊评价方法研究,1999,18(1),94 ,DOI:, ISSN:1003-8728
103.NC 机床评价系统中机床人机工程多级模糊评价方法研究,1998,(06),42-44 ,DOI:, ISSN:1003-8728
104.3D环境下飞机装配工艺规划与仿真一体化模型,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2012,18(6),1158-1167 ,DOI:, ISSN:1006-5911
105.基于网格门户的产品异地协同设计平台,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2007,13(12),2294-2300,2308 ,DOI:10.3969/j.issn.1006-5911.2007.12.002, ISSN:1006-5911
106.基于自适应蚁群算法的协同制造项目资源优化配置,CIMS, Sub-Box 34, P.O. Box 2413, Beijing, 100089, China,2008,14(3),576-580 ,DOI:, ISSN:1006-5911
107.基于装配修正树模型的飞机装配容差分析,2001,,492-494 ,DOI:, ISSN:



English Version