相册


基本信息 The basic information
姓名: 吴建军

学院: 机电学院


学历: 博士研究生毕业

学位: 工学博士


职称: 教授

职务:


学科: 航空宇航科学与技术





科学研究 Scientific Research
研究方向：主要从事材料力学行为建模及复杂形状轻质合金构件精确成形工艺与装备的研究与教学工作。
科研情况：主持国家自然科学基金、国家“863”计划项目、航空科学基金、国防基础研究基金、留学回国人员基金、陕西省重点研发计划以及C919关键技术攻关等科研项目30余项。在国内外刊物发表论文170余篇，EI收录80余篇，SCI收录40余篇，授权发明专利10余项，出版专著3部，其中“板料成形性基本理论” 获中国大学出版社优秀专著二等奖。获省部级科技进步成果奖三项，陕西省优秀教学成果一等奖二项。2000-2001年在英国剑桥大学 和strathclyde 大学作访问****；2006年3-5月在法国utc大学进行高访研究；2014年4-5月在法国valenciennes大学做访问教授。






学术成果 Academic Achievements
1. 《板料成形性基础》专著.吴建军.周维贤，西工大出版社，2004年9月
2. 《板料成型性基本理论》专著.吴建军等，国防出版社，2009年11月
3.《现代飞机机翼壁板数字化喷丸成形技术》专著.杨永红.吴建军.乔明杰，西工大出版社，2011年4月
2019年成果
[ 1 ]Muzamil, Muhammad, Wu, Jianjun. Multicomponent enabled MWCNTs-TiO2 nano-activating flux for controlling the geometrical behavior of modified TIG welding joint process.DIAMOND AND RELATED MATERIALS. 2019, 97.
[ 2 ]Zhang, Zengkun, Wu, Jianjun, Shang, Qi, et al. A new strategy for describing the characteristics of bending line in flexible push bending.ENGINEERING COMPUTATIONS. 2019, 36(5), 1597-1607.
[ 3 ]Muzamil, Muhammad, Wu, Jianjun, Akhtar, Maaz, et al. Modified TIG Welding Joint Process: An Approach to Improve Microstructure and Fracto-Mechanical Behavior by MWCNTs Inducement in Al-Mg-Si Alloy.MATERIALS. 2019, 12(9).
[ 4 ]Muzamil, Muhammad, Wu, Jianjun, Samiuddin, Muhammad, et al. Effect of age hardening to reclaim mechanical properties at different levels of temperature with prolong holding time on GTAW weldments.PROCEEDINGS OF 2019 16TH INTERNATIONAL BHURBAN CONFERENCE ON APPLIED SCIENCES AND TECHNOLOGY (IBCAST). 2019, 20-25.
[ 5 ]Muzamil, Muhammad, Wu, Jianjun, Samiuddin, Muhammad, et al. .The response of heat-treatable filler on non-heat-treatable aluminum alloy substrate against age hardening cycle for intelligent development of surface welded joints using TIG welding process.JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING. 2019, 41(5).
[ 6 ]汪冠宇, 马贵春, 吴建军,.2099-T83铝锂合金本构模型研究.塑性工程学报. 2019, 26(1), 174-181.
[ 7 ]Muzamil, Muhammad, Wu, Jianjun, Samiuddin, Muhammad,.Modified utilization of semi-sectioned tubes as filler coated with MWCNTs-TiO2 in TIG arc welding to recover fusion lost mechanical properties of the weldment.JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING. 2019, 41(1).
[ 8 ]Wang, Mingzhi, Wu, Jianjun,.Identification of plastic properties of metal materials using spherical indentation experiment and Bayesian model updating approach.INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES. 2019, 151(2019), 733-745.
[ 9 ]惠钰, 吴建军, 王明智, et al. .基于球形压痕响应的各向异性材料等效应变硬化指数（英文）.Transactions of Nonferrous Metals Society of China. 2019, 77-87.
2018年成果
[ 1 ]Wu, Jianjun, Guo, Ruichao,.Constitutive Behavior for Quenching of Al-Cu-Mg Alloy With Consideration of Precipitation.JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME. 2018, 140(4).
[ 2 ]张增坤, 吴建军, 尚琪, et al. .空间管件弯扭组合加载成形及回弹规律研究.航空制造技术. 2018, 26-31.
[ 3 ]乔顺成, 吴建军, 展学鹏,.各向异性屈服准则的UMAT子程序二次开发研究.锻压装备与制造技术. 2018, 89-97.
[ 4 ]邬洪飞, 吴建军, 王明智, et al. .金属材料剪切试验方法.航空制造技术. 2018, 53-59.
[ 5 ]王永安, 吴建军, 李非凡, et al. .薄壁管数控弯曲成形工艺参数区间研究.塑性工程学报. 2018, 111-118.
[ 6 ]惠钰, 吴建军, 王明智, et al. .基于压痕响应各向异性板料的硬化指数.中国有色金属学报. 2018, 685-692.
[ 7 ]Wu, Jianjun, Wang, Mingzhi, Hui, Yu, et al. Identification of anisotropic plasticity properties of materials using spherical indentation imprint mapping.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 2018, 273, 269-278.
[ 8 ]Guo, Ruichao, Wu, Jianjun,.Dislocation density based model for Al-Cu-Mg alloy during quenching with considering the quench-induced precipitates. JOURNAL OF ALLOYS AND COMPOUNDS. 2018, 741, 432-441.
[ 9 ]Wang, Mingzhi, Wu, Jianjun, Fan, He, et al. Extraction of the Anisotropic Plasticity of Metal Materials by Using Inverse Analysis and Dual Indentation Tests.MATERIALS. 2018, 11(1).
[ 10 ]Liu, Tianjiao, Wang, Yongjun, Wu, Jianjun, et al. Minimum bending radius of Al-Li alloy extrusions in stretch bending.PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 2018, 232(2), 281-295.
[ 11 ]Zhan, Xuepeng, Wu, Jianjun, Wu, Hongfei, et al. A new modified ECMapproach on the identification of plastic anisotropic properties by spherical indentation.MATERIALS & DESIGN. 2018, 139, 392-408.





社会兼职 Social Appointments
西北工业大学 “飞行器制造工程”国防重点专业、陕西省名牌专业以及国家特色负责人负责人，西北工业大学翱翔名师，国家科学技术奖评审专家，塑性成形技术航空科技重点实验室学术委员。



English Version