姓名：翟强
职称：讲师
学位：博士
毕业院校：美国威斯康星大学密尔沃基分校
所学专业：机械工程




研究方向

可持续制造，海洋工程结构完整性管理

教育经历

上海交通大学船舶与海洋工程专业，工学学士（2000）
上海交通大学港口海岸及近海工程专业，工学硕士（2004）
威斯康星大学密尔沃基分校机械工程专业，哲学博士（2012）

获奖情况

NSF Student Grant Award for 2012 Life Cycle Engineering Conference, 2012
UW System Solid Waste Research Program Student Grant Award, 2011, 2012
UWM Chancellor's Graduate Student Award, 2010, 2011, 2012
MSEC2011/NAMRC39 Student Travel Support Grant Award 2011
UWM Graduate Student Travel Award, 2011

科研项目

Co-PI, “A Low Cost Separation Technology for Recycling Manufacturing Metal Chip Wastes”, Wisconsin Solid Waste Research Council, 2012-2013
Co-PI, “Recycling Metal Chips of Manufacturing Industry through a Hydrodynamic & Electromagnetic Separation Approach”, Wisconsin Solid Waste Research Council, 2011-2012

发表文章

Yuan, C., Wang, E.,Zhai, Q., Yang, F. (2015). “Temporal discounting in life cycle assessment: A critical review and theoretical framework”,Environmental Impact Assessment Review, 51, 23-31. (SSCI-Q1)
Zhai, Qiang, Huajun Cao, Xiang Zhao, and Chris Yuan. "Assessing application potential of clean energy supply for greenhouse gas emission mitigation: a case study on General Motors global manufacturing",Journal of Cleaner Production,75 (2014): 11-19. (SCI2区)
Yuan, C.,Zhai, Q., Dornfeld, D. “A three dimensional system approach for environmentally sustainable manufacturing”,CIRP Annals-Manufacturing Technology, 61(1), 2012,pp.39-42. (SCI2区)
Zhai Q., Cao, H.J., Zhao, X., Yuan, C. “Cost Benefit Analysis of Greenhouse Gas Emission Mitigation of Global Automotive Manufacturing through Clean Energy Supply”,Energies, 4(10), 2011, pp 1478-1494. (SCI3区)
Zhai, Q., Yuan, C. “Separating Manufacturing Metal Chips for Recycling through a Combined Hydrodynamic and Electromagnetic Approach”,Proceedings of the 19th CIRP Conference on Life Cycle Engineering, May 23-25, 2012,Berkeley, CA. (EI)
Zhai, Q., Alberts, S., Cao, H.J., Zhao, S. Yuan, C. “Strength Analysis of International Feed-in Tariff Promotion of Clean Energy Applications for Greenhouse Gas Emission Mitigation”,Proceedings of the 2010 IEEE International Symposium on Sustainable Systems and Technology (ISSST).(SCI)
Zhai, Q., Crowley, B, Yuan, C. “Temporal Discounting for Life Cycle Assessment: Differences between Environmental Discounting and Economic Discounting”,Proceedings of the 2011 IEEE International Symposium on Sustainable Systems and Technology (ISSST). (SCI)
Zhai, Q., Cao, HJ, Zhao, X., Yuan, C. “Reducing Greenhouse Gas Emissions of Global Automotive Manufacturing through Clean Energy Supply: a Cost Benefit Analysis”,Proceedings of the 2011 IEEE International Symposium on Sustainable Systems and Technology (ISSST).(EI)
Cao, H.,Zhai, Q., Alberts, S., Zhao,S., Yuan, C. “Greenhouse Gas Emission Mitigation of Global Automotive Manufacturing through Clean Energy Supply”,Proceedings of the 2010 IEEE International Symposium on Sustainable Systems and Technology (ISSST),May 17-19, 2010, Arlington, VA. (SCI)
Zhai, Q., Ciardo, K., Yuan, C. “Temporal Discounting for Life Cycle Assessment: Perspectives and Mechanisms”,Proceedings of the 2010 CIRP International Conference on Life Cycle Engineering, May 19-21, 2010, Hefei, China.
Zhai, Q., Zhao,X., Yuan, C. “A Cost Benefit Trend Analysis of Solar Photovoltaic Supply for Greenhouse Gas Emission Mitigation of Global Automotive Manufacturing”,Proceedings of the 2012 IEEE International Symposium on Sustainable Systems and Technology (ISSST). May 16-18, 2012, Boston, MA.
Yu, X., Kang, H. S., Huang, L., Xie, Y.,Zhai, Q., & Chen, G. (2011, January). “Dynamic Response Control of a Jacket Platform Using MR Dampers Based on an Inverse Dynamic Model”,Proceedings of the 2011 International Offshore and Polar Engineering Conference.
Zhai, Q., Yuan, C. “A Framework for Temporal Discounting in Life Cycle Assessment”, Abstract,Proceedings of the 2011 International Conference on Industrial Ecology, June 7-10,2011, Berkeley, CA.
倪智慧, 陈辉, 董礼先, 时钟, 王殿志,翟强.“长江口外羽状流水体中的垂向混合与层化的观测与分析”,上海交通大学学报, 2012; 11:029.

学术兼职

Journal of Environmental Progress and Sustainable Energy; Journal of Mechanical Engineering; ASME Manufacturing Science and Engineering Conference (MSEC); International Symposium on Sustainable Systems and Technology (ISSST); International Offshore and Polar Engineering Conference (ISOPE) 审稿人

办公室

工程实验楼

电子邮箱

zhaiqiang@sdu.edu.cn