臧述升 研究员
所在系所叶轮机械研究所
办公电话
通讯地址上海交大机械与动力工程学院A楼523室
电子邮件sszang@sjtu.edu.cn
个人主页 tmi.sjtu.edu.cn/staff/zss.html


教育背景 1994-1999哈尔滨船舶工程学院动力系 轮机工程专业博士
1989-1991哈尔滨船舶工程学院动力系 轮机工程专业硕士
1978-1982清华大学热能动力工程系 燃气轮机专业学士

工作经历 2001 - 2015 上海交通大学机械与动力工程学院叶轮机械研究所研究员、副所长、所长
1998 - 2001 上海交通大学机械与动力工程学院叶轮机械研究所副教授
1991 - 1998 哈尔滨船舶工程学院动力系副教授、涡轮机教研室主任
1982 - 1991 哈尔滨船舶工程学院动力系讲师
1994.6 乌克兰国力海洋大学船舶动力系科研交流
1999.6 丹麦哥本哈根Dantec公司，技术培训
2005.03-09 德国达姆施塔特工业大学能源和动力技术研究所高访****

研究方向 燃气轮机总体性能
燃气轮机先进燃烧技术

科研项目 2004－2009 国家部委预研项目“高速船燃气轮机推进系统匹配性研究”负责人
2006－2010 国家部委预研项目“燃气轮机性能综合状态评估 ”负责人
2009－2012 上海重大科技攻关项目“燃气轮机合成气燃烧室关键技术研究”负责人
2011－2015 国家工信部重点专项“燃气轮机变几何涡轮性能研究”负责人
2011－2015 国家工信部重点专项“燃气轮机健康状态及故障诊断技术研究”负责人
2012－2015 国家部委重点专项“燃气轮机燃烧室振荡燃烧机理试验研究”负责人
2011－2015 国家科技部“863”子课题“城市地下车库污染物通风管道设计技术研究”负责人
2014－2015 中船重工701所“燃气轮机进气道流场数值模拟与试验研究”负责人
2014－2015 上海电气集团“重型燃气轮机高温涡轮气动与涂层技术研究”负责人
2016－2017 航天部研究所“闭式燃气轮机原理样机研制”负责人

代表性论文专著 一、期刊文章
1.Bing Ge, Yongbin Ji, Shusheng Zang, Effusion Cooling Characteristics of a Model Combustor Liner at Non-reacting/Reacting Flow Conditions, Applied Thermal Engineering, 113(2017): 902-911， (SCI,AB档)
2.Bing Ge, Yinsheng Tian, Shusheng Zang, The effects of humidity on combustion characteristics of a nonpre-mixed syngas flame , International Journal of Hydrogen Energy, 2016年6月 (SCI, AB档)
3.Zhang Zilai, Zang Shusheng, Ge Bing, etal, Acoustic diagnostic application in the study of oscilation combustion in lean premixed pre-evaporation combustor, Journal of Engineering for gas turbines and power. (SCI推荐，已录用）
4.Ji, Yongbin ;,Ge, Bing*;, Chi, Zhongran; Zang, Shusheng, Overall cooling effectiveness of effusion cooled annular combustor liner at reacting flow conditions, Applied Thermal Engineering, v 130, p 877-888, 2018（SCI推荐）
5.Weijie Liu, Bing Ge, Yinshen Tian, Shusheng, Zang. Experimental Study on Instability Characteristics of Low-Swirl Flames in a Multi-Nozzle Combustor with Different Arrays. ASME Journal of Engineering for Gas Turbines and Power, 2017, (SCI推荐)
6.Ma, Chao , Ji, Yongbin; Ge, Bing;, Zang, Shusheng, Comparative Study of Convective Heat Transfer Performance of Steam and Air Flow in Rib Roughened Channels, Thermal Science, v 27, n 2, p 184-194, April 1, 2018
7.Sun, Peifeng; Yuan, Yiren; Ge, Bing; Zang, Shusheng, Combustion Oscillation Characteristics and Flame Structures in a Lean Premixed Prevaporized Combustor , ENERGY & FUELS, 2017.9, 31(9): 10060~10067（SCI，AB档）
8.Ji, Yongbin; Singh, Prashant; Ekkad, Srinath V.; Zang, Shusheng , Effect of crossflow regulation by varying jet diameters in streamwise direction on jet impingement heat transfer under maximum crossflow condition, Numerical Heat Transfer; Part A: Applications, v 72, n 8, p 579-599, October 18, 2017
9.Ji, Yongbin, Ma, Chao; Ge, Bing; Zang, Shusheng Source: Conjugate heat transfer investigation on the cooling performance of air cooled turbine blade with thermal barrier coating, Journal of Thermal Science, v 25, n 4, p 325-335, August 1, 2016
10.Tian Y. S., Zang S. S., Bing Ge，Experimental investigation on the combustion performance of N-2 dilution in syngas non-premix combustion in humid air conditions，Applied Thermal Engineering, 2016.6(SCI AB档)
11.Ma, Chao; Ji, Yongbin; Zang, Shusheng; Chen, Hua, An experimental study on convective heat transfer performance of steam and air flow in V-shaped rib roughened channels, Experimental Heat Transfer, 2018 Article in Press
12.Chi, Zhongran; Liu, Haiqing; Zang, Shusheng Semi-Inverse Design Optimization Method for Film-Cooling Arrangement of High-Pressure Turbine Vanes, Journal of Propulsion and Power, v 32, n 3, p 659-673, 2016
13.Chi, Zhongran; Liu, Haiqing; Zang, Shusheng Multi-objective optimization of the impingement-film cooling structure of a gas turbine endwall using conjugate heat transfer simulations, Journal of Thermal Science and Engineering Applications, v 10, n 2, April 1, 2018
14.Chi, Zhongran; Liu, Haiqing; Zang, Shusheng, Geometrical optimization of nonuniform impingement cooling structure with variable-diameter jet holes, International Journal of Heat and Mass Transfer, v 108, p 549-560, 2017
15.Chi, Zhongran, Liu, Haiqing; Zang, Shusheng , Semi-inverse design optimization of film cooling arrangement and its prediction of coolant amount of HPT vanes, International Journal of Gas Turbine, Propulsion and Power Systems, v 8, n 3, p 1-11, December 2016
16.Chi, Zhongran; Ren, Jing; Jiang, Hongde; Zang, Shusheng, Geometrical Optimization and Experimental Validation of a Tripod Film Cooling Hole with Asymmetric Side Holes , Journal of Heat Transfer, v 138, n 6, June 1, 2016

二、会议文章
1.Bing Ge, Yongbin Ji, Shusheng Zang, et al, Investigation of the Combustion Performance in a Three-Nozzle RQL Combustor, Proceedings of the ASME Turbo Expo 2016, GT2016-57308, Seoul, South Korea. (EI, ISTP)
2.Bing Ge, Yinshen Tian, Yongbin Ji, Shusheng Zang, Effects of Equivalence Ratio on the Combustion Performance of Staged Swirl Flame, GPPS-2018, Montreal, Canada, 2018
3.Yongbin Ji, Bing Ge, Shusheng Zang, et al, Investigation of flow characteristics in a combustor with opposed jets, Proceedings of the ASME Turbo Expo 2018, Oslo, Norway, 2018(EI, ISTP)
4.Weijie Liu，Bing Ge，Shusheng Zang ,Large eddy simulation of combustion instabilityof low-swirl flames in a multi-nozzle combustor, Proceedings of the ASME Turbo Expo 2017: Charlotte, NC, United states, 2017(EI, ISTP)
5.Liu, Weijie; Ge, Bing; Tian, Yinshen; Zang, Shusheng; Weng, Shilie; Li, Mingjia; Xu, Wenyan, Experimental study on instability characteristics of low-swirl flames in a multi-nozzle combustor with different swirling arrays , Proceedings of the ASME Turbo Expo, v 4A-2016, 2016, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, GT 2016
6.Ji, Yongbin , Singh, Prashant; Ekkad, Srinath V.; Zang, Shusheng , Numerical investigation of scoop effect on film cooling for cylindrical inclined hole, v 8, 2017, ASME 2017 International Mechanical Engineering Congress and Exposition, IMECE 2017
7.Ji, Yongbin; Ge, Bing; Zang, Shusheng; Xin, Jianhua; Ye, Chun; Song, Huafeng, Effect of holes array on effusion cooling characteristics of a three-nozzle model combustor liner, Proceedings of the ASME Turbo Expo, v 5C-2017, 2017, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, GT 2017
8.Yongbin Ji, Bing Ge, Shusheng Zang, et al, Experimental Investigation of Effusion Cooling Performance on the Liner of a Scaled Three Injector Annular Combustor, Proceedings of the ASME Turbo Expo 2016, GT2016-57035, South Korea. (EI, ISTP)
9.Zhang, Zilai; Zang, Shusheng; Ge, Bing; Sun, Peifeng, Acoustic diagnostics applications in the study of the oscillation combustion in lean premixed pre-evaporation combustor, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), v 13, 2017, ASME 2017 International Mechanical Engineering Congress and Exposition, IMECE 2017
10.Chi, Zhongran; Liu, Haiqing; Zang, Shusheng Multi-objective optimization of the impingement-film cooling structure of a hpt endwall using conjugate heat transfer CFD , Proceedings of the ASME Turbo Expo, v 2C-2016, 2016, ASME Turbo Expo 2016:
11.Chi, Zhongran; Liu, Haiqing; Zang, Shusheng; Pan, Chengxiong; Zhang, Meibao, Full-annulus urans study of inlet hot-streak transportation in a four-stage gas turbine, Proceedings of the ASME Turbo Expo, v 2A-2018, 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018
12.Liu, Haiqing , Chi, Zhongran; Zang, Shusheng, Influence of relative velocity ratio on centrifugal impellers operating with supercritical CO2, Proceedings of the ASME Turbo Expo, v 9, 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, GT 2018
13.Chi, Zhongran; Liu, Haiqing; Zang, Shusheng, Parametric cooling study of single-row cylindrical film holes on pressure side of a rotor blade, Proceedings of the ASME Turbo Expo, v 5A-2017, 2017, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, GT 2017

教学工作 动力循环分析 本科 54学时 7学期
叶轮机械气动力学 硕士 36学时 2学期
热力系统分析 博士 36学时 2学期

软件版权登记及专利 [1] 适用于涡轮叶片后部冷却腔的W形肋通道冷却结构, 发明人：马超，臧述升，王建飞，公开日期：2013.05.08，公开号：CN A.
[2] 涡轮叶片内部带有栅格扰流的冲击冷却结构, 发明人：马超，臧述升，王建飞，葛冰，公开日期：2013.05.01，公开号：CN A.

学术兼职 国家燃气轮机标准化技术委员会委员 2001-
上海市工程热物理学会秘书长 2006-
上海市科学技术协会委员 2007-

荣誉奖励 中国船舶工业总公司科技进步二等奖 1990
中国船舶工业总公司科技成果三等奖 1989
中国船舶工业总公司科技进步三等奖（两项） 1991
中国船舶工业总公司先进青年科技工作者 1992
黑龙江省青年教师优秀教学成果奖 1991
国家优秀教学成果二等奖（第5名） 2005