冯淼林 工程力学系
办公电话：　
电子邮件：mlfeng@sjtu.edu.cn
通讯地址：木兰船建大楼A915



个人简历 研究方向 学术兼职 科研项目 代表性论文及专著 教学工作 软件版权登记及专利
1990年毕业于中国科学技术大学近代力学系，获理学学士学位。1997年及2000年在中国科学技术大学力学和机械工程系固体力学专业获工学硕士和博士学位。2001年初到澳大利亚做短期访问研究，随后在美国内华达大学里诺分校从事博士后研究工作。2005年2月回国到上海交通大学船舶海洋与建筑工程学院工程力学系工作。


结构和材料的疲劳及疲劳裂纹扩展研究
非线性损伤与疲劳断裂力学
复合材料力学性能数值研究
微细观力学


核心期刊《力学季刊》编委
中国力学学会计算力学分委员会委员
上海市力学学会固体力学分委员会委员


主持国家自然科学基金3项，参加国家自然科学基金2项。在研国家自然科学基金1项,海外归国留学人员基金项目1项,横向项目多项


在国内外学术刊物上发表学术论文80余篇，其中SCI收录60余篇。近3年通讯作者发表论文：
1. Y. Qi, X. Chen, M. Feng*, Molecular Dynamics-Based Analysis of the Effect of Voids and HCP-Phase Inclusion on Deformation of Single-Crystal CoCrFeMnNi High-Entropy Alloy, Materials Science & Engineering A, inpress, 2020.
2. Y. Qi, X. Chen, M. Feng*, Molecular dynamics-based analysis of the effect of temperature and strain rate on deformation of nanocrystalline CoCrFeMnNi high-entropy alloy, Applied Physics A,126, 529(1-10), 2020.
3. L. Meng, M. Yang, X. Chen, Y. Hu, M. Feng*, Physically short fatigue crack growth from notch described by plasticity-corrected stress intensity factor, International Journal of Mechanical Sciences,176,105544(1-9), 2020.
4. L. Meng, W. Chen, M. Feng*, An experimental study of creep-ratchetting behavior of rolled AZ31B magnesium alloy at room temperature, Fatigue & Fracture of Engineering Materials & Structures, 43, 417-428, 2020.
5. M. Yang, M. Feng*, Finite element implementation of non-unified visco-plasticity model considering static recovery, Mechanics of Time-Dependent Materials, 24, 59-72. 2020
6. Y. Qi, X. Chen, M. Feng*, Effect of void defect on c-axis deformation of single-crystal Ti under uniaxial stress conditions: Evolution of tension twinning and dislocations, Journal of Materials Research, 34, 3699-3706, 2019.
7. L. Meng, W. Chen, Y. Yan, T. Kitamura, M. Feng*, Modelling of creep and plasticity deformation considering creep damage and kinematic hardening, Engineering Fracture Mechanics, 218, 106582(1-15), 2019.
8. L. Meng, S. Hallais, A. Tanguy, W. Chen, M. Feng*, The effect of stress rate on ratchetting behavior of rolled AZ31B magnesium alloy at 393 K and room temperature, Materials Research Express, 6, 086510 (1-16), 2019.
9. T. He, M. Feng*, X. Chen, Martensitic transformation effect on dislocation emission from a semi-infinite crack tip in nanocomposites, Acta Mechanica Solida Sinica, 32, 160-172, 2019.
10. T. He, M. Feng*, X. Chen, Crack interaction with nanoscale twinning near a second-phase particle in fine-grained magnesium alloy, Mathematics and Mechanics of Solids, 24, 1243-1255, 2019.
11. W. Chen, T. Kitamura, X. Wang, M. Feng*, Size effect on cyclic torsion of micro-polycrystalline copper considering geometrically necessary dislocation and strain gradient, International Journal of Fatigue, 117, 292-298, 2018
12. W. Chen, T. Kitamura, M. Feng*, Creep and fatigue behavior of 316L stainless steel at room temperature: experiments and a revisit of a unified viscoplasticity model, International Journal of Fatigue, 112,70-77, 2018.
13. T. He, M. Feng*, Combined effects of cooperative grain boundary sliding and migration and reinforced particles on crack growth in fine-grained Mg alloys, Journal of Alloys and Compounds, 749,705-714, 2018.
14. T. He, M. Feng*, Effect of nanotwin near a branched crack tip on crack blunting in deformed nanocrystalline materials, Acta Mechanica, 229, 3223-3234. 2018
15. W. Chen, T. Kitamura, M. Feng*, Effect of geometrically necessary dislocations on inelastic strain rate for torsion stress relaxation of polycrystalline copper in micro scale, Materials Science and Engineering: A, 726,137-142. 2018


高等计算力学/有限元高等教程 研究生课程
计算材料与断裂 研究生课程


2011-11-16 热应力循环试验装置