SEMINAR
Shanghai Institute of Ceramics, Chinese Academy of Sciences
中国科学院上海硅酸盐研究所

　　GB chemistry of silicon nitride based ceramics – implications to the ceramics properties

　　Speaker：Prof. RNDr. PAVOL ?AJGALíK

　　Slovak Academy of Sciences, Bratislava, Slovakia

　　时间：4月7日（周五）上午9:30

　　地点：四号楼14楼第一会议室

　　联系人：江东亮院士，张景贤研究员（52412167）

　　Six different sintering aids (Lu₂O₃, Yb₂O₃, Y₂O₃, Sm₂O₃, Nd₂O₃ and La₂O₃) were used for the processing of dense Si₃N₄/SiCmicro/nano composites. Formation of SiC nano–inclusions was achieved by in situ carbothermal reduction of SiO₂ by C during the sintering process. Room temperature fracture toughness, hardness and strength showed increasing tendency when the used rare-earth element in the oxide additive changes from alarge to asmall rare-earth cation (i.e. from La³⁺ to Lu³⁺). Besides the highest hardness and reasonably high fracture toughness and strength of composite material with Lu₂O₃ sintering additive. The first principle calculations were used for the explanation of the fracture behaviour of the composites depending on the rare earth additive. The energy of fracture was calculated with respect to the chemical composition of GB. The experimental and theoretical results will be discussed.

　　Besides mechanical properties composites the thermal shock resistance, wear resistance and oxidation resistance are discussed.

　　Thermal shock resistance: A critical temperature difference increased with an increasing ionic radius of RE³⁺for both the composites and the monoliths.

　　Wear behavior: The friction coefficient as well as the specific wear rate decreased with a decreasing ionic radius of rare-earth elements in both the monoliths and the composites. High bonding strength and the high fracture toughness are the reasons why the ceramics doped by Lu exhibited the best wear resistance.

　　Oxidation resistance: Composites exhibited predominately parabolic oxidation behaviour indicated diffusion as the rate limiting mechanism. Exception was only the Si₃N₄-SiC composite sintered with Lu₂O₃. In this case diffusion of cation has been strongly suppressed because of the beneficial effect of stable grain boundary phase and the presence of the SiC particles predominately located at the grain boundaries of Si₃N₄.