教育经历：

1983年毕业于北京大学数学系，获学士学位；
1985年在北京大学数学系、应用数学专业，获硕士学位；
1985-1987在意大利、乌迪内，国际力学中心（CISM），进修;
1987-1992在联邦德国、柏林工业大学工程物理系、材料热力学专业任助教，同时攻读博士。1992年获博士学位。
1992-1994在联邦德国、慕尼黑工业大学应用数学所，作博士后研究。1994-1996在美国、内布拉斯加州立大学工程力学系，作博士后研究。
1996年回国，任四川大学金属材料系，教授、博士生导师；
2001初调入中国科学院上海硅酸盐研究所，2001年9月获德国洪堡基金会资助，赴柏林工业大学做洪堡访问****；
2002年12月回国，调入复旦大学力学系。

研究领域：
相变型智能材料（形状记忆合金、液晶高弹体）多场耦合作用下复杂行为的机理、本构关
系及非线性力学特性；以及智能材料的工程应用。核能用核燃料的可靠性与优化设计。

开设过的课程：
本科生：高等代数、固体力学基础、弹性力学、复合材料
研究生：专业英语、高等连续介质力学、材料热力学

学术组织任职：
中国力学学会，“理性力学和力学中的数学方法”专业委员会委员；
国际力学与数学交叉学会（ISIMM，International Society for the Interaction of Mechanics and Mathematics） 会员

学术刊物任职：美国数学学会“Mathematical Review”(《数学评论》)评论员;

目前承担的科研项目：
射线辐照下材料微结构的演化及其对力学性能的影响。国家自然科学基金项目
弥散燃料元件堆内辐照热-力耦合行为数值模拟技术研究，中国核动力研究设计院国家级重点实验室运行基金
液晶网络聚合物材料与结构的光热驱动及多尺度力学行为，国家自然科学基金项目

发表的科技论文：近十年文章

国外杂志
1.Chen Xuan, Cheng Peng, and Yongzhong Huo*, One Dimensional Model of Martensitic Transformation Solved by Homotopy Analysis Method, Z. Naturforsch. (Zeitschrift Fur Naturforschung Section A-A Journal Of Physical Sciences ) 67a, 230 – 238 (2012)
2.Hao Huang, Zhi Zeng and Yongzhong Huo*, Biaxial loading of neo-classical liquid crystal elastomers: constitutive relations and soft behavior, Acta Mechanica Solida Sinica, Vol. 25, No. 5, October,493-509, 2012
3.Yue You, Changwei Xu, Shurong Ding and Yongzhong Huo，Coupled effects of director orientations and boundary conditions on light induced bending of monodomain nematic liquid crystalline polymer plates，Smart Materials and Structures，21 (2012) 125012 (15pp) Number 12, December 2012
4.Y. Yan1, H. Yin2, QP Sun2, Y. Huo*， Rate dependence of temperature fields and energy dissipations in non-static pseudoelasticity， Continuum Mech. Thermodyn. (2012) 24(4-6):675–695
5.Y. Lin, L. Jin and Y. Huo*, Quasi-soft opto-mechanical behavior of photochromic liquid crystal elastomer:Linearized stress–strain relations and finite element simulations, International Journal of Solids and Structures 49 (2012) 2668–2680. Issue 18, September.
6.Yi Cui, Yongzhong Huo, Shurong Ding*, Lin Zhang, Yuanming Li, An analytical solution for simulation of the fission gas behaviors with time-dependent piece-wise boundary resolution, Journal of Nuclear Materials, Volume 424, Issues 1–3, May 2012, Pages 109-115
7.Chen, CQ1; Cui, JZ 2; Duan, HL 3,4; Feng, XQ 1; He, LH 5; Hu, GK 6; Huang, MJ 7; Huo, YZ 8; Ji, BH 6; Liu, B 1; Peng, XH 9; Shi, HJ 1; Sun, QP 10; Wang, JX 3,4; Wang, YS 11; Zhao, HP 1; Zhao, YP 12; Zheng, QS 1; Zou, WN 7 , PERSPECTIVES IN MECHANICS OF HETEROGENEOUS SOLIDS, ACTA MECHANICA SOLIDA SINICA 卷: 24 期: 1 特刊: 2 页: 1-26 出版年: FEB 2011
8.L. Jin, Y. Lin and Y. Huo*, A large deflection light-induced bending model for liquid crystal elastomers under uniform or non-uniform illumination, International Journal of Solids and Structures 48 (2011) 3232–3242. Issue 22-23, November.
9.Binglian Wang; Yizeng Li, Yongzhong Huo*, Thermal Stress Distributions and Optimization on Stress reductions with or/and without Linearly Graded Interlayers, Composites: Part B 42 (5) (2011) 993–1007.
10.Binglian Wang, Yue You, and Yongzhong Huo*, Opto-thermo actuation of multilayered liquid crystal polymer films, Thin Solid Films 519 (2011) 5310–5313, Issue 15, May.
11.You Yue, Xu Changwei, Wang Binglian, Jin Lihua, Huo Yongzhong*, Photo-actuated bending of chromatic liquid crystal polymer strips and laminates, International Journal of Smart and Nano Materials, 2011, 2(4) 245-260.
12.Yijie Jiang, Yi Cui, Yongzhong Huo, Shurong Ding*, Prediction of the micro-thermo-mechanical behaviors in dispersion nuclear fuel plates with heterogeneous particle distributions, 2011，Journal of Nuclear Materials 418: 69-79.
13.Yijie Jiang, Yi Cui, Yongzhong Huo, Shurong Ding*, Three-dimensional FE Analysis of the thermal-mechanical behaviors in the nuclear fuel rods, 2011, Annals of Nuclear Energy 38: 2581-2593.
14.Qiming Wang, Yi Cui, Yongzhong Huo, Shurong Ding*，Simulation of the coupling behaviors of particle and matrix irradiation swelling and cladding irradiation growth of plate-type dispersion nuclear fuel elements，2011，Mechanics of Materials 43：222–241.
15.Yijie Jiang, Qiming Wang, Yi Cui, Yongzhong Huo, Shurong Ding*, Simulation of irradiation hardening of Zircaloy within plate-type dispersion nuclear fuel elements, Journal of Nuclear Materials, 2011, 413(2): 76-89.
16.Yijie Jiang, Yi Cui, Yongzhong Huo, Shurong Ding*, A method for 3D simulation of internal gas effects on thermal-mechanical behaviors in nuclear fuel elements, 2011,Nuclear Science and Techniques 22 (3): 185-192
17.Qiming Wang, Xiaoqing Yan, Shurong Ding, Yongzhong Huo, Research on the interfacial behaviors of plate-type dispersion nuclear fuel elements , Journal of Nuclear Materials, Volume 399, Issue 1, 1 April 2010, Pages 41-54.
18.Qiming Wang, Xiaoqing Yan, Shurong Ding, Yongzhong Huo, Mechanical behaviors of the dispersion nuclear fuel plates induced by fuel particle swelling and thermal effect I: Effects of variations of the fuel particle volume fractions, Journal of Nuclear Materials, Volume 400, Issue 2, 15 May 2010, Pages 157-174.
19.Shurong Ding, Qiming Wang, Yongzhong Huo, Mechanical behaviors of the dispersion nuclear fuel plates induced by fuel particle swelling and thermal effect II: Effects of variations of the fuel particle diameters, Journal of Nuclear Materials, Volume 397, Issues 1-3, February 2010, Pages 80-91.
20.Shurong Ding, J.W. Tong, Z.Y. Wang, and Yongzhong Huo，Fracture Characters and Damage Mechanism of the Notched AS4/PEEK Composite Laminate, Journal of Thermoplastic Composite Materials, September 2010 23: 565-581.
21Shurong Ding, J. W. Tong, M. Shen, Yongzhong Huo, Three-Dimensional Elastic-Plastic Analysis of the Interlaminar Stresses for the AS4/PEEK Composite Laminate with a Circular Hole, Mechanics of Advanced Materials and Structures, 2010,17:406–418.
22.Qiming Wang, Yongzhong Huo, Shurong Ding et.al, Numerical Study on the Thermal-elastoplastic Behaviors of Plate-type Dispersion Nuclear Fuel Elements, International Journal of Nonlinear Sciences and Numerical Simulation,Vol 11, No. 7, JULY 2010, Pages 477-487.
23.Lihua Jin, Zhi Zeng, Yongzhong Huo*, Thermomechanical modeling of the thermo-order-mechanical coupling behaviors in liquid crystal elastomers, Journal of the Mechanics and Physics of Solids, 58(11) (2010) 1907–1927, November.
24.Zhi Zeng, Lihua Jin, Yongzhong Huo*, Strongly anisotropic elastic moduli of nematic elastomers: analytical expressions and nonlinear temperature dependence, The European Physical Journal E , 032(1), 71–79 (2010) 10.1140/epje/i2010-10599-9
25.Lihua Jin, Yongzhong Huo*, A gradient model of light-induced bending in photochromic liquid crystal elastomers and its nonlinear behaviors, International Journal of Non-Linear Mechanics, 45-4 (2010) 370–381
26.X. Jiang, T. Zhang, S. Ding and Y. Huo*， Effect of self-heating on photo-mechanical behavior of nematic elastomers, Thermochimica Acta, 500 (2010) Issue 1-2, 44–50
27.Xiaoqing Yan, Shurong Ding*, J.W. Tong, M. Shen, Y. Z. Huo, Elastic-plastic numerical simulation of the interlaminar stresses for the notched angle-ply thermoplastic composite laminate, Mechanics of Composite Materials, 45（3）: 293-302，MAY 2009
28.Ding SR, Huo YZ*, Yan XQ, Modeling of the heat transfer performance of plate-type dispersion nuclear fuel elements, Journal Of Nuclear Materials 卷: 392 期: 3 页: 498-504 出版年: AUG 1 2009
29.Ding SR, Huo YZ* Li LA, Effects of Fission Heat and Fuel Swelling on the Thermal-mechanical Behaviors of Dispersion Fuel Elements, Mechanics of Advanced Materials and Structures, 卷: 16 期: 7 页: 552-559 出版年: 2009,
30.Yizeng Li, Yongzhong Huo*, Effectiveness of compositionally linearly graded interlayers for thermal stress reduction, Thin Solid Films 2009, 517(8), 2691-2696, doi: 10.1016/j.tsf.2008.11.124
31.Lihua Jin, Yongzhong Huo*, Bifurcation and stability of martensitic transformation dynamics, International Journal of Bifurcation and Chaos, 18(12): 3737-3752, 2008.
32.Cheng Peng, Xingyao Wang, Yongzhong Huo*, Characteristics of stress-induced transformation and microstructure evolution in Cu-Based SMA, Acta Mechanica Solida Sinica, 21(1): 1-8, 2008. DOI: 10.1007/s10338-008-0801-x
33.Shurong Ding and Yongzhong Huo*, Finite element modeling of thermal-mechanical behaviors of dispersion fuel elements, Nuclear Technology, 2008, 163 (SEP.), 416-425.
34.Shurong Ding, Xin Jiang, Yongzhong Huo, Li, Lin an, Reliability Analysis of Dispersion Fuel Elements, Journal of Nuclear Materials, 374 (3), 453-460, 2008 . DOI: 10.1016/j.jnucmat.2007.10.006.
35.T. M. Atanackovic, Y. Huo*, Z. Jelicic, I. Mueller, “Phase diagrams modified by interfacial penalties”, Theoretical and Applied Mechanics, 34(4): 249-288, 2007
36.Shurong Ding, J. W. Tong, Y. Z. Huo* And M. Shen, Effects of the Strain Rate Variation on the Interlaminar Stresses of the Thick Angle-ply Laminates, Journal of Reinforced Plastics & Composites, 26(4):431-442, 2007.
37.Ding*, Shurong, Tong, J. W., Shen, M., Huo, Y. Z. , The Rate-Dependence Analysis of the Interlaminar Stresses of the Thick Thermoplastic Composite AS4/PEEK Laminate，Journal of Thermoplastic Composite Materials, 20 (1): 111-131 JAN 2007.
38.Ding, Shurong, Tong, J. W., Shen, M., Li, H. Q., Huo, Y. Z.* , Strain-rate dependence of interlaminar stress fields in the vicinity of free edges of AS4-PEEK composite laminates under uniaxial tension, Journal of reinforced plastics and composites 25 (10): 1091-1100 2006
39.Ding SR*, Huo YZ, Tong JW, Shen M, Aymerich F, Priolo P, Interlaminar stress analysis of thick thermoplastic AS4-PEEK composite laminates, Journal of Reinforced Plastics and Composites 25 (6): 589-600 2006
38.Ding SR, Huo YZ, Tong JW*, Shen M, Aymerich F, Priolo P, Viscoplastic analysis of the off-axis rate-dependent inelastic behavior of unidirectional AS/PEE, Journal of Reinforced Plastics and Composites 25 (5): 475-482 2006.
40.Z.G. Wang, X.T. Zu*, H.J. Yu , X. He, C. Peng, Y. Huo, Temperature memory effect in CuAlNi single crystalline and CuZnAl polycrystalline shape memory alloys, Thermochimica Acta 448 (2006) 69–72.
41.Wang Z.G., Zu XT, Huo YZ, “Effect of heating/cooling rate on the transformation temperatures in TiNiCu shape memory alloys”, Thermochimica Acta, 436(1-2)(2005), 153-155.
42.Mo HQ, Zu XT, Huo YZ, “Irradiation-induced changes of martensitic transformation changes in TiNiNb shape memory alloy”, Thermochimica Acta, 428(2005), 41-45.
43.Y. Huo, X.T. Zu, A. Li, Z.G. Wang, L.M. Wang, “Modeling and simulation of irradiation effects on martensitic transformations in shape memory alloys”, Acta Materialia, 52(9), 2683-2690, May 2004.
44.Wang, Z.G.; Zu, X.T.; Huo, Y.; Zhu, S.; Wei, X.W.; Wang, L.M., Effect of electron irradiation and heat treatment on the multi-step transformation in a Ni-rich near-equiatomic TiNi alloy Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms Volume: 215, Issue: 3-4, February, 2004, pp. 436-442.
45.Wang, Z.G.; Zu, X.T. Wu, J.H., Liu, L.J. Mo H.Q., Huo Y., Electron irradiation-induced evolution of the martensitic transformation characteristics in a CuZnAl shape memory alloy, Journal of Alloys and Compounds 364,(2004) 171-175.
46.Giovanni Buratti, Yongzhong Huo and Ingo Müller, “Eshelby tensor as a tensor of free enthalpy”, Journal of Elasticity, 72,(1/3) 31-42, 2003.
47.Yongzhong Huo and Ingo Müller, “Interface and Inhomogeneity Penalties in Phase Transitions”, Continuum Mechanics and Thermodynamics, 15 (4): 395-407 AUG 2003.
48.Zu XT, Zhu S, Xiang X, You LP, Huo Y, Wang LM，” In situ TEM observation of heavy-ion-irradiation-induced amorphization in a TiNiCu shape memory alloy”, Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing ,363 (1-2): 352-355 DEC 20 2003.
49.Wang ZG, Zu XT, Liu LJ, Zhu S, Huo Y, Lin LB, Feng XD, Wang LM, Effect of 18 MeV proton irradiation on the R-phase transformation in TiNi shape memory alloys, Nuclear Instruments & Methods In Physics Research Section B-Beam Interactions With Materials And Atoms , 211 (2): 239-243 OCT 2003.
50.Yongzhong Huo and Ingo Müller, “Nucleation of droplets in a binary mixture”, Meccanica, 38(2003), 493-504.
X. T. Zu, L. B. Lin, Z. G. Wang, S. Zhu, L. P. You, L. M. Wang, Y. Huo, Influence of electron irradiation on the martensitic transformation of a binary TiNi shape memory alloy, Journal of Alloys and Compounds, 351(2003), 87-90.
51.X.T. Zu, C.F. Zhang, S. Zhu, Y. Huo, Z.G. Wang, L.M. Wang, “Electron irradiation-induced changes of martensitic transformation characteristics in a TiNiCu shape memory alloy”, Materials Letters, 57(2003), 2099-2103.


中文期刊
1.崔羿,丁淑蓉*，赵云妹,霍永忠等, 考虑晶界扩散和气泡联合的UO2燃料裂变气体模型,核动力工程.
2.林茵； 晏艳； 李重河； 朱明； 霍永忠，TiNi单晶形状记忆合金力热耦合实验分析，力学季刊，2012年33卷，03期，367-374
3.曾志，金丽华，霍永忠，单轴拉伸下液晶高弹体力学行为的热力序耦合特性，固体力学学报， 32卷，5期，十月，50-512, 2011.
4.许昌威; 林茵; 尤玥; 霍永忠, 四边简支液晶高弹体薄板光致弯曲行为分析, 力 学 季 刊, 2011年,32卷，03期 ，九月，360-366。
5.姜馨，丁淑蓉，霍永忠，弥散型燃料等效弹性性质的有限元模拟，2011，核动力工程，Vol.32, No. 3, 43-47
6.万远富,丁淑蓉,霍永忠*.弥散型核燃料的Eshelby解析分析.核动力工程，31卷，3期，45-49，2010
7.姜馨，丁淑蓉 霍永忠*，弥散型燃料元件等效热传导系数的有限元模拟，(核动力工程) 核动力工程，Vol.31, No.3, June 2010, Pages 45-49.
8.晏艳, 彭程, 霍永忠*. CuAlNi单晶应力诱发马氏体相变与微结构演化的实验观察与分析. 固体力学学报. 第30卷第6期, 1-7, 2009.
9.丁淑蓉 霍永忠*,, 弥散型燃料板辐照肿胀行为的有限元分析，核动力工程，2007年８月, v28, n4, p58-62.
10.金丽华，霍永忠，光敏液晶高弹体的光致弯曲特性，力学季刊，2007年3月，28卷1期。
11.丁淑蓉 姜馨 霍永忠*,, 弥散型燃料板原件可靠性与优化设计：理论建模与数值模拟，核动力工程，2007年5月，28卷，第二期（增刊）。2007年5月, v28, n2, Suppl., p16-19+37.
12.JIN Lihua, JIANG Xin & HUO Yongzhong, Light-induced nonhomogeneity and gradient bending in photochromic liquid crystal elastomers, Science in China Series G, 2006, 49: 553-563. (金丽华，姜馨，霍永忠，光敏液晶高弹体的光致非均匀性及其梯度弯曲，《中国科学G》，2006, 36: 393-402)
13.王星耀、彭程，霍永忠，马氏体相变微结构演化过程的模拟与分析，固体力学学报，2006， 12月，27卷，专辑，1-4。
14.丁淑蓉 霍永忠, 弥散型核燃料元件热应力的计算模拟，，固体力学学报，2006， 12月，27卷，专辑，97-102。
15.姜馨、张田、霍永忠，液晶高弹体的光致变形与弯曲行为研究，力学季刊，26（2005）-4，27-30. CSCD
16.王星耀、霍永忠，马氏体相变过程中形核、失稳及多界面微结构的动力学模型，力学季刊，26（2005）-3，377-380。CSCD
17.霍永忠，热弹性马氏体相变连续介质热力学研究，力学进展，35（2005），No.3, Aug, 305-314. CSCD
18.向霞，祖小涛，张传飞，王治国，朱莎，曾光廷，霍永忠，王鲁闵, 对单晶YSZ的Xe+ 离子离子辐照效应研究，《强激光与粒子束》，15（4），405-408，2003。CSCD
19.向霞，祖小涛，王治国，朱莎，曾光廷，霍永忠，王鲁闵, Xe+ 离子注入对单晶YSZ光学性能影响的研究，《功能材料》，34(4):450-451, 2003.。(Influence of Xe+ ion implantation on spectral properties of yttria-stabilized zirconia single crystals). CSCD

国际会议
1.Huo, YZ (Huo, Yongzhong)1; You, Y (You, Yue)1; Xu, CW (Xu, Changwei)1; Lin, Y (Lin, Ying)1 , Opto-mechanical behavior of photochromic liquid crystal polymer film composites, Behavior And Mechanics Of Multifunctional Materials And Composites 2011 丛书: Proceedings of SPIE 卷: 7978 文献号: 79780H DOI: 10.1117/12.879561 出版年: 2011
2.S.R.Ding, Y.F.Wan, Y.Cui and Y.Z.Huo, Irradiation-induced thermo-mechanical coupling in dispersion nuclear fuel elements, 511-518, Advances in Heterogeneous Material Mechanics 2011: Proceedings of the Third International Conference on Heterogeneous Material Mechanics, May 22-26, 2011, Shanghai, China ISBN-10: , ISBN-13: 49 , Destech Pubns Inc (15 May 2011)
3.C. W. Xu, Y. You, Y. Lin and Y. Z. Huo*，Optically-driven Reversible Deformations in Nematic Liquid Crystal Polymer Networks, 560-563， Advances in Heterogeneous Material Mechanics 2011: Proceedings of the Third International Conference on Heterogeneous Material Mechanics, May 22-26, 2011, Shanghai, China, ISBN-10: , ISBN-13: 49 , Destech Pubns Inc (15 May 2011).
4.S.R.Ding, Y.J.Jiang, Q.M. Wang and Y.Z.Huo, Effects of heterogeneous distribution of fuel particles on the irradiation-induced mechanical behaviors in the dispersion nuclear fuel plate, 527-530, Advances in Heterogeneous Material Mechanics 2011: Proceedings of the Third International Conference on Heterogeneous Material Mechanics, May 22-26, 2011, Shanghai, China, ISBN-10: , ISBN-13: 49 , Destech Pubns Inc (15 May 2011).
5.Yongzhong Huo, A hybrid elements model of the stress-strain hysteresis in shape memory alloys, Second International Conference on Smart Materials and Nanotechnology in Engineering, Proc. of SPIE Vol. 7493,2009, edited by Jinsong Leng, Anand K. Asundi, Wolfgang Ecke, 749321: 1-6.
6.Binglian Wang, Yizeng Li, Yongzhong Huo*, Thermal stress reduction of bilayered systems by means of linearly graded interlayer, Proc. of SPIE Vol. 7493,2009, edited by Jinsong Leng, Anand K. Asundi, Wolfgang Ecke,749348: 1-8.
7.Yongzhong Huo, One dimensional modeling of the initiation and growth of microstructures in martensitic transformation, International conference on applied mathematics: modeling, analysis and computation, City University of Hong Kong, June 1-5, 2008.
8.Peng C, Yan Y, Wang XY, Huo YZ, Analysis of microstructure evolution during tensile stress induced martensitic transformations, SMASIS2008-358, Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2008 (Smart Materials, Adaptive Structuters and Intelligent Systems), October 28-30, 2008, Ellicott City, Maryland, USA
9.Yongzhong Huo, Cheng Peng & Yan Yan, Nucleation And Growth Of Stress-Induced Martensitic Fine Layered Structures In Shape Memory Alloys Under Uniaxial Tension, XXII ICTAM(International Conference on Theoretical and Applied Mechanics), 25-29 August 2008, Adelaide, Australia
10.Jin, L. H., Jiang, X., Yan, Y., Huo, Y. Z. Optical bending moment and light-induced deflection of photochromic liquid crystal elastomers, Advances in Heterogeneous Material Mechanics 2008, Pages: 649-652, Published: 2008, Editor(s): Fan JH; Chen HB, Conference Information: International Conference on Heterogeneous Material Mechanics (ICHMM), Huangshan, China, Jun 03-08, 2008,
11.Peng, C.,Yan, Y., Huo, Y. Z. Quantitative analysis of microstructure evolution in shape memory alloys during martensitic transformation, Advances in Heterogeneous Material Mechanics 2008, Pages: 788-792, Published: 2008, Editor(s): Fan JH; Chen HB, Conference Information: International Conference on Heterogeneous Material Mechanics (ICHMM), Huangshan, China, Jun 03-08, 2008.
12.Ding, Shurong, Huo, Yongzhong, Jiang, Xin, Wan, Yuanfu, Numerical simulation of the irradiation-mechanical behaviors of dispersion nuclear fuel elements, Advances in Heterogeneous Material Mechanics 2008, Pages: 1518-1521, Published: 2008, Editor(s): Fan JH; Chen HB, Conference Information: International Conference on Heterogeneous Material Mechanics (ICHMM), Huangshan, China, Jun 03-08, 2008.
13.Lihua Jin, Yan Yan, Yongzhong Huo*, Light-induced bending and smart control of photochromic liquid crystal elastomers, International Conference on Smart Materials and Nanotechnology in Engineering, edited by Shanyi Du, Jinsong Leng, Anand K. Asundi, Proc. of SPIE Vol. 6423, 64230W, (2007) Proceedings of the Society of Photo-Optical Instrumentation Engineers (SPIE) Vol: 6423, p. W4230-W4230, Part 1-3, 2007.
14.Lihua Jin, Yan Yan, Yongzhong Huo*, Nonlinear opto-mechanical behavior in photochromic liquid crystal elastomers, Proceedings of the 5th international conference on nonlinear mechanics, p. 438-444, 2007 , edited by Chien WZ, 5th International Conference on Nonlinear Mechanics (ICNM-V) Shanghai, China, Jun 11-14, 2007.
15.Ding, Shurong, Huo, Yongzhong, Li, Lin An, Effects of Fission Heat and Fuel Swelling on the Thermal-mechanical Behaviors of Dispersion Fuel Elements, 5th International Conference on Nonlinear Mechanics (ICNM-V), pp 552-559, 2007/6/11(Science Citation Index Expanded (SCI-EXPANDED)).0 (2009/12/21)
16.Yongzhong Huo and Ingo Müller, “Energy penalties in materials with microstructures of phase transitions: modified Gibbs phase rule”, in IUTAM Symposium on Size Effects on Materials and Structural Behavior at Micron- and Nano-Scales, Edited by Q.P. Sun and P. Tong, Proceedings of the IUTAM Symposium held in Hong Kong, China, 31 May-4 June, 2004. Springer, Dordrecht, Netherlands. Solid Mechanics and Its Applications, vol. 142.
17.Yongzhong Huo and Ingo Müller, “Energy penalty, energy barrier and hysteresis in martensitic transformations”, in Trends And Applications Of Mathematics To Mechanics : 85-99, 2005, Editor(s): Rionero S, Romano G, Springer-Verlag Berlin, Heidelberger Platz 3, D-14197 Berlin, German

专利：
霍永忠、唐力晨、丁淑蓉、陈力奋、钱浩、谢永诚、宁冬、刘家正，微动疲劳试验平台，申请日期2011年1月26日，申请号：6.3，中国国家知识产权局