Welcometo my website!
基本信息秦娜,硕导
博士学科：机械制造及自动化
硕士学科：机械制造及自动化
工作单位：西南交通大学机械学院
联系方式通信地址：成都市二环路北一段111号
电子邮箱：tinaspirit@home.swjtu.edu.cn
办公电话：**
办公地点：西南交通大学先进设计与制造技术研究所
个人简历本科：1999.9-2003.7 吉林大学 机械工程学院 硕士：2003.9-2005.9 大连理工大学 机械工程学院 师从郭东明院士博士：2005.9-2011.6 大连理工大学 机械工程学院 师从郭东明院士博士：2008.6-2011.5 美国堪萨斯州立大学 工业工程学院 师从Z.J.Pei教授任教：2011.10-至今 西南交通大学机械学院
研究方向(1) 难加工材料的非传统加工。
(2) 多轴数控机床机及其加工技术。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
目前主持的研究
高档数控机床与基础制造装备重大专项中的课题“高档数控机床与基础制造装备专项“国产高档数控机床在典型飞机结构件加工中的示范应用。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
论文成果
1.Guo, D.M, Qin, N.,Kang, R.K., Jin, Z.J.. Novel measurement technique on 3D surface topography ofpolishing pad, Advanced Materials Research, 2008, 53-54: 265-272.
2.Qin, N., Pei, Z.J., Treadwell, C.,Guo, D.M.. Physics-based predictive cutting force model inultrasonic-vibration-assisted grinding for titanium drilling, Journal ofManufacturing Science and Engineering, 2009, 131 (4)：041011-1-041011-9.
3.Qin, N., Pei, Z.J., Fisher, G.R., Liu, J.. Simultaneous double-sidegrinding of silicon wafers: a review and analysis of experimentalinvestigations, Machining Science and Technology, 2009, 13 (3):285-316.
4.Qin, N., Guo, D.M., Kang, R.K., Huo,F.W.. Effect of Conditioning Parameters on Surface Non-uniformity of PolishingPad in Chemical Mechanical Planarization, Key Engineering Materials, 2009,389-390: 498-503.
5.Qin, N., Pei, Z.J., Guo, D.M..Ultrasonic-vibration-assisted grinding of titanium: cutting force modeling withdesign of experiments, Proceedings of the ASME International ManufacturingScience & Engineering Conference, 2009, 2: 619-624.
6.Qin, N., Pei, Z.J., and Guo, D.M..Nanotopography in silicon wafer manufacturing: a literature review, Proceedingsof ASME International Manufacturing Science & Engineering Conference, 2009,1:721-728.
7.Qin, N., Pei, Z.J., Guo, D.M. Cong,W.L.. Effects of tool design on edge chipping in ultrasonic-vibration-assistedgrinding, Proceedings of the 2010 ASME International Manufacturing Science andEngineering Conference, 2010, Erie, Pennsylvania, USA.
8.Qin, N., Pei, Z.J.. Four empiricalmodels for pelleting of cellulosic biomass, Proceedings of the 2010 ASMEInternational Manufacturing Science and Engineering Conference MSEC2010,October 12-15, 2010, Erie, Pennsylvania, USA.
9.Qin, N., Cong, W.L., Pei, Z.J.,Cong, W.L., Treadwell, C., and Guo, D.M.. 2010, “Ultrasonic-vibration-assisted grindingof brittle materials: a mechanistic model for cutting force,” Proceedings of the ASME 2011 International Manufacturing Scienceand Engineering Conference, June 13-17, 2011, Corvallis, Oregon, USA.
10. Qin, N., Pei, Z.J., Guo, D.M., Cong, W.L.. UVAG of brittle materials:DoE with a cutting force model, Proceedings of the 2010 Industrial EngineeringResearch Conference, June 5-9, 2010, Cancún, Mexico.
11. Qin, N., Pei, Z. J.. Fundamental Research on Silicon Wafer FineGrinding: 2010 Progress Report, 2011 NSF CMMI Grantees Conference, Jan 4-7, inAtlanta, GA.
12. Zhang, M., Song, X.X.,Deines, T., Zhang, P.F., Zhang, Q., Cong, W.L., Qin, N., Pei, Z.J.. Ultrasonic-vibration-assisted Pelleting ofSwitchgrass: Effects of Binder Material, Proceedings of the 2010 IndustrialEngineering Research Conference, June 5-9, 2010, Cancún, Mexico.
13. P.F., Zhang, Deines, T., W.L.Cong Cong, W.L., Qin, N., Pei, Z.J.,Nottingham, D.. Ultrasonic vibration-assisted pelleting of switchgrass: effectsof moisture content on pellet density, spring-back, and durability, Proceedingsof the 2010 Flexible Automation and Intelligent Manufacturing InternationalConference, July 12-14, 2010, Hayward, CA.
14. Cong, W.L., P.F., Zhang, Qin, N., Deines, T., Zhang, M., Pei,Z.J.. Ultrasonic-vibration-assisted pelleting of switchgrass: effects of ultrasonicvibration, The 14th International Manufacturing Conference in China (IMCC2011)，Tianjin, October13-15, 2011.
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
荣誉奖励
Copyright? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
科研团队
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
基本信息秦娜,硕导
博士学科：机械制造及自动化
硕士学科：机械制造及自动化
工作单位：西南交通大学机械学院
联系方式通信地址：成都市二环路北一段111号
电子邮箱：tinaspirit@home.swjtu.edu.cn
办公电话：**
办公地点：西南交通大学先进设计与制造技术研究所
个人简历本科：1999.9-2003.7 吉林大学 机械工程学院 硕士：2003.9-2005.9 大连理工大学 机械工程学院 师从郭东明院士博士：2005.9-2011.6 大连理工大学 机械工程学院 师从郭东明院士博士：2008.6-2011.5 美国堪萨斯州立大学 工业工程学院 师从Z.J.Pei教授任教：2011.10-至今 西南交通大学机械学院
研究方向(1) 难加工材料的非传统加工。
(2) 多轴数控机床机及其加工技术。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
目前主持的研究
高档数控机床与基础制造装备重大专项中的课题“高档数控机床与基础制造装备专项“国产高档数控机床在典型飞机结构件加工中的示范应用。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
论文成果
1.Guo, D.M, Qin, N.,Kang, R.K., Jin, Z.J.. Novel measurement technique on 3D surface topography ofpolishing pad, Advanced Materials Research, 2008, 53-54: 265-272.
2.Qin, N., Pei, Z.J., Treadwell, C.,Guo, D.M.. Physics-based predictive cutting force model inultrasonic-vibration-assisted grinding for titanium drilling, Journal ofManufacturing Science and Engineering, 2009, 131 (4)：041011-1-041011-9.
3.Qin, N., Pei, Z.J., Fisher, G.R., Liu, J.. Simultaneous double-sidegrinding of silicon wafers: a review and analysis of experimentalinvestigations, Machining Science and Technology, 2009, 13 (3):285-316.
4.Qin, N., Guo, D.M., Kang, R.K., Huo,F.W.. Effect of Conditioning Parameters on Surface Non-uniformity of PolishingPad in Chemical Mechanical Planarization, Key Engineering Materials, 2009,389-390: 498-503.
5.Qin, N., Pei, Z.J., Guo, D.M..Ultrasonic-vibration-assisted grinding of titanium: cutting force modeling withdesign of experiments, Proceedings of the ASME International ManufacturingScience & Engineering Conference, 2009, 2: 619-624.
6.Qin, N., Pei, Z.J., and Guo, D.M..Nanotopography in silicon wafer manufacturing: a literature review, Proceedingsof ASME International Manufacturing Science & Engineering Conference, 2009,1:721-728.
7.Qin, N., Pei, Z.J., Guo, D.M. Cong,W.L.. Effects of tool design on edge chipping in ultrasonic-vibration-assistedgrinding, Proceedings of the 2010 ASME International Manufacturing Science andEngineering Conference, 2010, Erie, Pennsylvania, USA.
8.Qin, N., Pei, Z.J.. Four empiricalmodels for pelleting of cellulosic biomass, Proceedings of the 2010 ASMEInternational Manufacturing Science and Engineering Conference MSEC2010,October 12-15, 2010, Erie, Pennsylvania, USA.
9.Qin, N., Cong, W.L., Pei, Z.J.,Cong, W.L., Treadwell, C., and Guo, D.M.. 2010, “Ultrasonic-vibration-assisted grindingof brittle materials: a mechanistic model for cutting force,” Proceedings of the ASME 2011 International Manufacturing Scienceand Engineering Conference, June 13-17, 2011, Corvallis, Oregon, USA.
10. Qin, N., Pei, Z.J., Guo, D.M., Cong, W.L.. UVAG of brittle materials:DoE with a cutting force model, Proceedings of the 2010 Industrial EngineeringResearch Conference, June 5-9, 2010, Cancún, Mexico.
11. Qin, N., Pei, Z. J.. Fundamental Research on Silicon Wafer FineGrinding: 2010 Progress Report, 2011 NSF CMMI Grantees Conference, Jan 4-7, inAtlanta, GA.
12. Zhang, M., Song, X.X.,Deines, T., Zhang, P.F., Zhang, Q., Cong, W.L., Qin, N., Pei, Z.J.. Ultrasonic-vibration-assisted Pelleting ofSwitchgrass: Effects of Binder Material, Proceedings of the 2010 IndustrialEngineering Research Conference, June 5-9, 2010, Cancún, Mexico.
13. P.F., Zhang, Deines, T., W.L.Cong Cong, W.L., Qin, N., Pei, Z.J.,Nottingham, D.. Ultrasonic vibration-assisted pelleting of switchgrass: effectsof moisture content on pellet density, spring-back, and durability, Proceedingsof the 2010 Flexible Automation and Intelligent Manufacturing InternationalConference, July 12-14, 2010, Hayward, CA.
14. Cong, W.L., P.F., Zhang, Qin, N., Deines, T., Zhang, M., Pei,Z.J.. Ultrasonic-vibration-assisted pelleting of switchgrass: effects of ultrasonicvibration, The 14th International Manufacturing Conference in China (IMCC2011)，Tianjin, October13-15, 2011.
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
荣誉奖励
Copyright? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
科研团队
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
硕士：2003.9-2005.9 大连理工大学 机械工程学院 师从郭东明院士博士：2005.9-2011.6 大连理工大学 机械工程学院 师从郭东明院士博士：2008.6-2011.5 美国堪萨斯州立大学 工业工程学院 师从Z.J.Pei教授任教：2011.10-至今 西南交通大学机械学院
研究方向(1) 难加工材料的非传统加工。
(2) 多轴数控机床机及其加工技术。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
目前主持的研究
高档数控机床与基础制造装备重大专项中的课题“高档数控机床与基础制造装备专项“国产高档数控机床在典型飞机结构件加工中的示范应用。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
论文成果
1.Guo, D.M, Qin, N.,Kang, R.K., Jin, Z.J.. Novel measurement technique on 3D surface topography ofpolishing pad, Advanced Materials Research, 2008, 53-54: 265-272.
2.Qin, N., Pei, Z.J., Treadwell, C.,Guo, D.M.. Physics-based predictive cutting force model inultrasonic-vibration-assisted grinding for titanium drilling, Journal ofManufacturing Science and Engineering, 2009, 131 (4)：041011-1-041011-9.
3.Qin, N., Pei, Z.J., Fisher, G.R., Liu, J.. Simultaneous double-sidegrinding of silicon wafers: a review and analysis of experimentalinvestigations, Machining Science and Technology, 2009, 13 (3):285-316.
4.Qin, N., Guo, D.M., Kang, R.K., Huo,F.W.. Effect of Conditioning Parameters on Surface Non-uniformity of PolishingPad in Chemical Mechanical Planarization, Key Engineering Materials, 2009,389-390: 498-503.
5.Qin, N., Pei, Z.J., Guo, D.M..Ultrasonic-vibration-assisted grinding of titanium: cutting force modeling withdesign of experiments, Proceedings of the ASME International ManufacturingScience & Engineering Conference, 2009, 2: 619-624.
6.Qin, N., Pei, Z.J., and Guo, D.M..Nanotopography in silicon wafer manufacturing: a literature review, Proceedingsof ASME International Manufacturing Science & Engineering Conference, 2009,1:721-728.
7.Qin, N., Pei, Z.J., Guo, D.M. Cong,W.L.. Effects of tool design on edge chipping in ultrasonic-vibration-assistedgrinding, Proceedings of the 2010 ASME International Manufacturing Science andEngineering Conference, 2010, Erie, Pennsylvania, USA.
8.Qin, N., Pei, Z.J.. Four empiricalmodels for pelleting of cellulosic biomass, Proceedings of the 2010 ASMEInternational Manufacturing Science and Engineering Conference MSEC2010,October 12-15, 2010, Erie, Pennsylvania, USA.
9.Qin, N., Cong, W.L., Pei, Z.J.,Cong, W.L., Treadwell, C., and Guo, D.M.. 2010, “Ultrasonic-vibration-assisted grindingof brittle materials: a mechanistic model for cutting force,” Proceedings of the ASME 2011 International Manufacturing Scienceand Engineering Conference, June 13-17, 2011, Corvallis, Oregon, USA.
10. Qin, N., Pei, Z.J., Guo, D.M., Cong, W.L.. UVAG of brittle materials:DoE with a cutting force model, Proceedings of the 2010 Industrial EngineeringResearch Conference, June 5-9, 2010, Cancún, Mexico.
11. Qin, N., Pei, Z. J.. Fundamental Research on Silicon Wafer FineGrinding: 2010 Progress Report, 2011 NSF CMMI Grantees Conference, Jan 4-7, inAtlanta, GA.
12. Zhang, M., Song, X.X.,Deines, T., Zhang, P.F., Zhang, Q., Cong, W.L., Qin, N., Pei, Z.J.. Ultrasonic-vibration-assisted Pelleting ofSwitchgrass: Effects of Binder Material, Proceedings of the 2010 IndustrialEngineering Research Conference, June 5-9, 2010, Cancún, Mexico.
13. P.F., Zhang, Deines, T., W.L.Cong Cong, W.L., Qin, N., Pei, Z.J.,Nottingham, D.. Ultrasonic vibration-assisted pelleting of switchgrass: effectsof moisture content on pellet density, spring-back, and durability, Proceedingsof the 2010 Flexible Automation and Intelligent Manufacturing InternationalConference, July 12-14, 2010, Hayward, CA.
14. Cong, W.L., P.F., Zhang, Qin, N., Deines, T., Zhang, M., Pei,Z.J.. Ultrasonic-vibration-assisted pelleting of switchgrass: effects of ultrasonicvibration, The 14th International Manufacturing Conference in China (IMCC2011)，Tianjin, October13-15, 2011.
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
荣誉奖励
Copyright? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
科研团队
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
博士：2008.6-2011.5 美国堪萨斯州立大学 工业工程学院 师从Z.J.Pei教授任教：2011.10-至今 西南交通大学机械学院
研究方向(1) 难加工材料的非传统加工。
(2) 多轴数控机床机及其加工技术。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
目前主持的研究
高档数控机床与基础制造装备重大专项中的课题“高档数控机床与基础制造装备专项“国产高档数控机床在典型飞机结构件加工中的示范应用。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
论文成果
1.Guo, D.M, Qin, N.,Kang, R.K., Jin, Z.J.. Novel measurement technique on 3D surface topography ofpolishing pad, Advanced Materials Research, 2008, 53-54: 265-272.
2.Qin, N., Pei, Z.J., Treadwell, C.,Guo, D.M.. Physics-based predictive cutting force model inultrasonic-vibration-assisted grinding for titanium drilling, Journal ofManufacturing Science and Engineering, 2009, 131 (4)：041011-1-041011-9.
3.Qin, N., Pei, Z.J., Fisher, G.R., Liu, J.. Simultaneous double-sidegrinding of silicon wafers: a review and analysis of experimentalinvestigations, Machining Science and Technology, 2009, 13 (3):285-316.
4.Qin, N., Guo, D.M., Kang, R.K., Huo,F.W.. Effect of Conditioning Parameters on Surface Non-uniformity of PolishingPad in Chemical Mechanical Planarization, Key Engineering Materials, 2009,389-390: 498-503.
5.Qin, N., Pei, Z.J., Guo, D.M..Ultrasonic-vibration-assisted grinding of titanium: cutting force modeling withdesign of experiments, Proceedings of the ASME International ManufacturingScience & Engineering Conference, 2009, 2: 619-624.
6.Qin, N., Pei, Z.J., and Guo, D.M..Nanotopography in silicon wafer manufacturing: a literature review, Proceedingsof ASME International Manufacturing Science & Engineering Conference, 2009,1:721-728.
7.Qin, N., Pei, Z.J., Guo, D.M. Cong,W.L.. Effects of tool design on edge chipping in ultrasonic-vibration-assistedgrinding, Proceedings of the 2010 ASME International Manufacturing Science andEngineering Conference, 2010, Erie, Pennsylvania, USA.
8.Qin, N., Pei, Z.J.. Four empiricalmodels for pelleting of cellulosic biomass, Proceedings of the 2010 ASMEInternational Manufacturing Science and Engineering Conference MSEC2010,October 12-15, 2010, Erie, Pennsylvania, USA.
9.Qin, N., Cong, W.L., Pei, Z.J.,Cong, W.L., Treadwell, C., and Guo, D.M.. 2010, “Ultrasonic-vibration-assisted grindingof brittle materials: a mechanistic model for cutting force,” Proceedings of the ASME 2011 International Manufacturing Scienceand Engineering Conference, June 13-17, 2011, Corvallis, Oregon, USA.
10. Qin, N., Pei, Z.J., Guo, D.M., Cong, W.L.. UVAG of brittle materials:DoE with a cutting force model, Proceedings of the 2010 Industrial EngineeringResearch Conference, June 5-9, 2010, Cancún, Mexico.
11. Qin, N., Pei, Z. J.. Fundamental Research on Silicon Wafer FineGrinding: 2010 Progress Report, 2011 NSF CMMI Grantees Conference, Jan 4-7, inAtlanta, GA.
12. Zhang, M., Song, X.X.,Deines, T., Zhang, P.F., Zhang, Q., Cong, W.L., Qin, N., Pei, Z.J.. Ultrasonic-vibration-assisted Pelleting ofSwitchgrass: Effects of Binder Material, Proceedings of the 2010 IndustrialEngineering Research Conference, June 5-9, 2010, Cancún, Mexico.
13. P.F., Zhang, Deines, T., W.L.Cong Cong, W.L., Qin, N., Pei, Z.J.,Nottingham, D.. Ultrasonic vibration-assisted pelleting of switchgrass: effectsof moisture content on pellet density, spring-back, and durability, Proceedingsof the 2010 Flexible Automation and Intelligent Manufacturing InternationalConference, July 12-14, 2010, Hayward, CA.
14. Cong, W.L., P.F., Zhang, Qin, N., Deines, T., Zhang, M., Pei,Z.J.. Ultrasonic-vibration-assisted pelleting of switchgrass: effects of ultrasonicvibration, The 14th International Manufacturing Conference in China (IMCC2011)，Tianjin, October13-15, 2011.
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
荣誉奖励
Copyright? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
科研团队
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
研究方向(1) 难加工材料的非传统加工。
(2) 多轴数控机床机及其加工技术。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
目前主持的研究
高档数控机床与基础制造装备重大专项中的课题“高档数控机床与基础制造装备专项“国产高档数控机床在典型飞机结构件加工中的示范应用。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
论文成果
1.Guo, D.M, Qin, N.,Kang, R.K., Jin, Z.J.. Novel measurement technique on 3D surface topography ofpolishing pad, Advanced Materials Research, 2008, 53-54: 265-272.
2.Qin, N., Pei, Z.J., Treadwell, C.,Guo, D.M.. Physics-based predictive cutting force model inultrasonic-vibration-assisted grinding for titanium drilling, Journal ofManufacturing Science and Engineering, 2009, 131 (4)：041011-1-041011-9.
3.Qin, N., Pei, Z.J., Fisher, G.R., Liu, J.. Simultaneous double-sidegrinding of silicon wafers: a review and analysis of experimentalinvestigations, Machining Science and Technology, 2009, 13 (3):285-316.
4.Qin, N., Guo, D.M., Kang, R.K., Huo,F.W.. Effect of Conditioning Parameters on Surface Non-uniformity of PolishingPad in Chemical Mechanical Planarization, Key Engineering Materials, 2009,389-390: 498-503.
5.Qin, N., Pei, Z.J., Guo, D.M..Ultrasonic-vibration-assisted grinding of titanium: cutting force modeling withdesign of experiments, Proceedings of the ASME International ManufacturingScience & Engineering Conference, 2009, 2: 619-624.
6.Qin, N., Pei, Z.J., and Guo, D.M..Nanotopography in silicon wafer manufacturing: a literature review, Proceedingsof ASME International Manufacturing Science & Engineering Conference, 2009,1:721-728.
7.Qin, N., Pei, Z.J., Guo, D.M. Cong,W.L.. Effects of tool design on edge chipping in ultrasonic-vibration-assistedgrinding, Proceedings of the 2010 ASME International Manufacturing Science andEngineering Conference, 2010, Erie, Pennsylvania, USA.
8.Qin, N., Pei, Z.J.. Four empiricalmodels for pelleting of cellulosic biomass, Proceedings of the 2010 ASMEInternational Manufacturing Science and Engineering Conference MSEC2010,October 12-15, 2010, Erie, Pennsylvania, USA.
9.Qin, N., Cong, W.L., Pei, Z.J.,Cong, W.L., Treadwell, C., and Guo, D.M.. 2010, “Ultrasonic-vibration-assisted grindingof brittle materials: a mechanistic model for cutting force,” Proceedings of the ASME 2011 International Manufacturing Scienceand Engineering Conference, June 13-17, 2011, Corvallis, Oregon, USA.
10. Qin, N., Pei, Z.J., Guo, D.M., Cong, W.L.. UVAG of brittle materials:DoE with a cutting force model, Proceedings of the 2010 Industrial EngineeringResearch Conference, June 5-9, 2010, Cancún, Mexico.
11. Qin, N., Pei, Z. J.. Fundamental Research on Silicon Wafer FineGrinding: 2010 Progress Report, 2011 NSF CMMI Grantees Conference, Jan 4-7, inAtlanta, GA.
12. Zhang, M., Song, X.X.,Deines, T., Zhang, P.F., Zhang, Q., Cong, W.L., Qin, N., Pei, Z.J.. Ultrasonic-vibration-assisted Pelleting ofSwitchgrass: Effects of Binder Material, Proceedings of the 2010 IndustrialEngineering Research Conference, June 5-9, 2010, Cancún, Mexico.
13. P.F., Zhang, Deines, T., W.L.Cong Cong, W.L., Qin, N., Pei, Z.J.,Nottingham, D.. Ultrasonic vibration-assisted pelleting of switchgrass: effectsof moisture content on pellet density, spring-back, and durability, Proceedingsof the 2010 Flexible Automation and Intelligent Manufacturing InternationalConference, July 12-14, 2010, Hayward, CA.
14. Cong, W.L., P.F., Zhang, Qin, N., Deines, T., Zhang, M., Pei,Z.J.. Ultrasonic-vibration-assisted pelleting of switchgrass: effects of ultrasonicvibration, The 14th International Manufacturing Conference in China (IMCC2011)，Tianjin, October13-15, 2011.
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
荣誉奖励
Copyright? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
科研团队
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
目前主持的研究
高档数控机床与基础制造装备重大专项中的课题“高档数控机床与基础制造装备专项“国产高档数控机床在典型飞机结构件加工中的示范应用。
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
论文成果
1.Guo, D.M, Qin, N.,Kang, R.K., Jin, Z.J.. Novel measurement technique on 3D surface topography ofpolishing pad, Advanced Materials Research, 2008, 53-54: 265-272.
2.Qin, N., Pei, Z.J., Treadwell, C.,Guo, D.M.. Physics-based predictive cutting force model inultrasonic-vibration-assisted grinding for titanium drilling, Journal ofManufacturing Science and Engineering, 2009, 131 (4)：041011-1-041011-9.
3.Qin, N., Pei, Z.J., Fisher, G.R., Liu, J.. Simultaneous double-sidegrinding of silicon wafers: a review and analysis of experimentalinvestigations, Machining Science and Technology, 2009, 13 (3):285-316.
4.Qin, N., Guo, D.M., Kang, R.K., Huo,F.W.. Effect of Conditioning Parameters on Surface Non-uniformity of PolishingPad in Chemical Mechanical Planarization, Key Engineering Materials, 2009,389-390: 498-503.
5.Qin, N., Pei, Z.J., Guo, D.M..Ultrasonic-vibration-assisted grinding of titanium: cutting force modeling withdesign of experiments, Proceedings of the ASME International ManufacturingScience & Engineering Conference, 2009, 2: 619-624.
6.Qin, N., Pei, Z.J., and Guo, D.M..Nanotopography in silicon wafer manufacturing: a literature review, Proceedingsof ASME International Manufacturing Science & Engineering Conference, 2009,1:721-728.
7.Qin, N., Pei, Z.J., Guo, D.M. Cong,W.L.. Effects of tool design on edge chipping in ultrasonic-vibration-assistedgrinding, Proceedings of the 2010 ASME International Manufacturing Science andEngineering Conference, 2010, Erie, Pennsylvania, USA.
8.Qin, N., Pei, Z.J.. Four empiricalmodels for pelleting of cellulosic biomass, Proceedings of the 2010 ASMEInternational Manufacturing Science and Engineering Conference MSEC2010,October 12-15, 2010, Erie, Pennsylvania, USA.
9.Qin, N., Cong, W.L., Pei, Z.J.,Cong, W.L., Treadwell, C., and Guo, D.M.. 2010, “Ultrasonic-vibration-assisted grindingof brittle materials: a mechanistic model for cutting force,” Proceedings of the ASME 2011 International Manufacturing Scienceand Engineering Conference, June 13-17, 2011, Corvallis, Oregon, USA.
10. Qin, N., Pei, Z.J., Guo, D.M., Cong, W.L.. UVAG of brittle materials:DoE with a cutting force model, Proceedings of the 2010 Industrial EngineeringResearch Conference, June 5-9, 2010, Cancún, Mexico.
11. Qin, N., Pei, Z. J.. Fundamental Research on Silicon Wafer FineGrinding: 2010 Progress Report, 2011 NSF CMMI Grantees Conference, Jan 4-7, inAtlanta, GA.
12. Zhang, M., Song, X.X.,Deines, T., Zhang, P.F., Zhang, Q., Cong, W.L., Qin, N., Pei, Z.J.. Ultrasonic-vibration-assisted Pelleting ofSwitchgrass: Effects of Binder Material, Proceedings of the 2010 IndustrialEngineering Research Conference, June 5-9, 2010, Cancún, Mexico.
13. P.F., Zhang, Deines, T., W.L.Cong Cong, W.L., Qin, N., Pei, Z.J.,Nottingham, D.. Ultrasonic vibration-assisted pelleting of switchgrass: effectsof moisture content on pellet density, spring-back, and durability, Proceedingsof the 2010 Flexible Automation and Intelligent Manufacturing InternationalConference, July 12-14, 2010, Hayward, CA.
14. Cong, W.L., P.F., Zhang, Qin, N., Deines, T., Zhang, M., Pei,Z.J.. Ultrasonic-vibration-assisted pelleting of switchgrass: effects of ultrasonicvibration, The 14th International Manufacturing Conference in China (IMCC2011)，Tianjin, October13-15, 2011.
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
荣誉奖励
Copyright? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
科研团队
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
论文成果
1.Guo, D.M, Qin, N.,Kang, R.K., Jin, Z.J.. Novel measurement technique on 3D surface topography ofpolishing pad, Advanced Materials Research, 2008, 53-54: 265-272.
2.Qin, N., Pei, Z.J., Treadwell, C.,Guo, D.M.. Physics-based predictive cutting force model inultrasonic-vibration-assisted grinding for titanium drilling, Journal ofManufacturing Science and Engineering, 2009, 131 (4)：041011-1-041011-9.
3.Qin, N., Pei, Z.J., Fisher, G.R., Liu, J.. Simultaneous double-sidegrinding of silicon wafers: a review and analysis of experimentalinvestigations, Machining Science and Technology, 2009, 13 (3):285-316.
4.Qin, N., Guo, D.M., Kang, R.K., Huo,F.W.. Effect of Conditioning Parameters on Surface Non-uniformity of PolishingPad in Chemical Mechanical Planarization, Key Engineering Materials, 2009,389-390: 498-503.
5.Qin, N., Pei, Z.J., Guo, D.M..Ultrasonic-vibration-assisted grinding of titanium: cutting force modeling withdesign of experiments, Proceedings of the ASME International ManufacturingScience & Engineering Conference, 2009, 2: 619-624.
6.Qin, N., Pei, Z.J., and Guo, D.M..Nanotopography in silicon wafer manufacturing: a literature review, Proceedingsof ASME International Manufacturing Science & Engineering Conference, 2009,1:721-728.
7.Qin, N., Pei, Z.J., Guo, D.M. Cong,W.L.. Effects of tool design on edge chipping in ultrasonic-vibration-assistedgrinding, Proceedings of the 2010 ASME International Manufacturing Science andEngineering Conference, 2010, Erie, Pennsylvania, USA.
8.Qin, N., Pei, Z.J.. Four empiricalmodels for pelleting of cellulosic biomass, Proceedings of the 2010 ASMEInternational Manufacturing Science and Engineering Conference MSEC2010,October 12-15, 2010, Erie, Pennsylvania, USA.
9.Qin, N., Cong, W.L., Pei, Z.J.,Cong, W.L., Treadwell, C., and Guo, D.M.. 2010, “Ultrasonic-vibration-assisted grindingof brittle materials: a mechanistic model for cutting force,” Proceedings of the ASME 2011 International Manufacturing Scienceand Engineering Conference, June 13-17, 2011, Corvallis, Oregon, USA.
10. Qin, N., Pei, Z.J., Guo, D.M., Cong, W.L.. UVAG of brittle materials:DoE with a cutting force model, Proceedings of the 2010 Industrial EngineeringResearch Conference, June 5-9, 2010, Cancún, Mexico.
11. Qin, N., Pei, Z. J.. Fundamental Research on Silicon Wafer FineGrinding: 2010 Progress Report, 2011 NSF CMMI Grantees Conference, Jan 4-7, inAtlanta, GA.
12. Zhang, M., Song, X.X.,Deines, T., Zhang, P.F., Zhang, Q., Cong, W.L., Qin, N., Pei, Z.J.. Ultrasonic-vibration-assisted Pelleting ofSwitchgrass: Effects of Binder Material, Proceedings of the 2010 IndustrialEngineering Research Conference, June 5-9, 2010, Cancún, Mexico.
13. P.F., Zhang, Deines, T., W.L.Cong Cong, W.L., Qin, N., Pei, Z.J.,Nottingham, D.. Ultrasonic vibration-assisted pelleting of switchgrass: effectsof moisture content on pellet density, spring-back, and durability, Proceedingsof the 2010 Flexible Automation and Intelligent Manufacturing InternationalConference, July 12-14, 2010, Hayward, CA.
14. Cong, W.L., P.F., Zhang, Qin, N., Deines, T., Zhang, M., Pei,Z.J.. Ultrasonic-vibration-assisted pelleting of switchgrass: effects of ultrasonicvibration, The 14th International Manufacturing Conference in China (IMCC2011)，Tianjin, October13-15, 2011.
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
荣誉奖励
Copyright? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
科研团队
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
1.Guo, D.M, Qin, N.,Kang, R.K., Jin, Z.J.. Novel measurement technique on 3D surface topography ofpolishing pad, Advanced Materials Research, 2008, 53-54: 265-272.
2.Qin, N., Pei, Z.J., Treadwell, C.,Guo, D.M.. Physics-based predictive cutting force model inultrasonic-vibration-assisted grinding for titanium drilling, Journal ofManufacturing Science and Engineering, 2009, 131 (4)：041011-1-041011-9.
3.Qin, N., Pei, Z.J., Fisher, G.R., Liu, J.. Simultaneous double-sidegrinding of silicon wafers: a review and analysis of experimentalinvestigations, Machining Science and Technology, 2009, 13 (3):285-316.
4.Qin, N., Guo, D.M., Kang, R.K., Huo,F.W.. Effect of Conditioning Parameters on Surface Non-uniformity of PolishingPad in Chemical Mechanical Planarization, Key Engineering Materials, 2009,389-390: 498-503.
5.Qin, N., Pei, Z.J., Guo, D.M..Ultrasonic-vibration-assisted grinding of titanium: cutting force modeling withdesign of experiments, Proceedings of the ASME International ManufacturingScience & Engineering Conference, 2009, 2: 619-624.
6.Qin, N., Pei, Z.J., and Guo, D.M..Nanotopography in silicon wafer manufacturing: a literature review, Proceedingsof ASME International Manufacturing Science & Engineering Conference, 2009,1:721-728.
7.Qin, N., Pei, Z.J., Guo, D.M. Cong,W.L.. Effects of tool design on edge chipping in ultrasonic-vibration-assistedgrinding, Proceedings of the 2010 ASME International Manufacturing Science andEngineering Conference, 2010, Erie, Pennsylvania, USA.
8.Qin, N., Pei, Z.J.. Four empiricalmodels for pelleting of cellulosic biomass, Proceedings of the 2010 ASMEInternational Manufacturing Science and Engineering Conference MSEC2010,October 12-15, 2010, Erie, Pennsylvania, USA.
9.Qin, N., Cong, W.L., Pei, Z.J.,Cong, W.L., Treadwell, C., and Guo, D.M.. 2010, “Ultrasonic-vibration-assisted grindingof brittle materials: a mechanistic model for cutting force,” Proceedings of the ASME 2011 International Manufacturing Scienceand Engineering Conference, June 13-17, 2011, Corvallis, Oregon, USA.
10. Qin, N., Pei, Z.J., Guo, D.M., Cong, W.L.. UVAG of brittle materials:DoE with a cutting force model, Proceedings of the 2010 Industrial EngineeringResearch Conference, June 5-9, 2010, Cancún, Mexico.
11. Qin, N., Pei, Z. J.. Fundamental Research on Silicon Wafer FineGrinding: 2010 Progress Report, 2011 NSF CMMI Grantees Conference, Jan 4-7, inAtlanta, GA.
12. Zhang, M., Song, X.X.,Deines, T., Zhang, P.F., Zhang, Q., Cong, W.L., Qin, N., Pei, Z.J.. Ultrasonic-vibration-assisted Pelleting ofSwitchgrass: Effects of Binder Material, Proceedings of the 2010 IndustrialEngineering Research Conference, June 5-9, 2010, Cancún, Mexico.
13. P.F., Zhang, Deines, T., W.L.Cong Cong, W.L., Qin, N., Pei, Z.J.,Nottingham, D.. Ultrasonic vibration-assisted pelleting of switchgrass: effectsof moisture content on pellet density, spring-back, and durability, Proceedingsof the 2010 Flexible Automation and Intelligent Manufacturing InternationalConference, July 12-14, 2010, Hayward, CA.
14. Cong, W.L., P.F., Zhang, Qin, N., Deines, T., Zhang, M., Pei,Z.J.. Ultrasonic-vibration-assisted pelleting of switchgrass: effects of ultrasonicvibration, The 14th International Manufacturing Conference in China (IMCC2011)，Tianjin, October13-15, 2011.
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
荣誉奖励
Copyright? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
科研团队
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
Copyright? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
科研团队
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
西南交通大学机械制造及其自动化 数字化设计与制造学术团队
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
课程教学(1)精密机械制造工程
(2)专业外语
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
招生信息机械基础好，英语读写能力强，团队合作意识以及责任心强
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
Copyright ? 2011http://inc.swjtu.edu.cn 西南交通大学信息网络中心
-----------------------------------------------------------------
个人信息 科学研究 论文成果 荣誉奖励 科研团队 课程教学 招生信息 English
Welcometo my website!
Basic InformationDr. Na Qin
Organization:Mechanical Engineering
Contact InformationAddress: Southwest Jiaotong University, Chengdu,Sichuan
E-mail: tinaspirit@home.swjtu.edu.cn
Office Tel: **
Resume Na Qin， Ph.D.
MainResearch Non-traditionalmachining of hard-to-machine materials
Copyright ? 2011 http://inc.swjtu.edu.cn 西南交通大学信息网络中心
Basic InformationDr. Na Qin
