导师简历
姓名: 吴振 性别: 男 职称: 教授
Email: wuzhenhk@163.com 联系方式: **
研究方向:
1、复合材料精细分析方法;
2、飞机复合材料结构设计与强度;
3、压电材料和功能材料计算方法。
简历:
吴 振(1977.05) 教授,大连理工大学兼职博士生导师。现任沈阳航空航天大学航空航天工程学部副部长,辽宁省飞行器复合材料结构分析与仿真重点实验室副主任。2008年度沈阳航空工业学院优秀科研工作者,2009年入选“辽宁省百千万人才工程”千人层次,2010年入选辽宁省高等学校优秀人才支持计划。
社会兼职
1) 辽宁省力学学会计算力学学会理事;
2) 多次应邀为20余家国际期刊审稿,这些期刊包括:Computer Methods in Applied Mechanics and Engineering, Composite Structures, Computational Mechanics, Journal of Sound and Vibration, Composite Part B: Engineering, European Journal of Mechanics-A/Solids, International Journal of Mechanical Science, Journal of Mechanics of Materials and Structures, Recent Patents on Mechanical Engineering等。国内一级学报《计算力学学报》审稿人。
3)《沈阳航空航天大学学报》编委
教育经历
2002.9-2007.6 大连理工大学 工程力学系 博士 导师 陈万吉 教授
2000.9-2002.7 大连理工大学 工程力学系 硕士 导师 陈万吉 教授
1996.9-2000.7 沈阳航空航天大学 飞行器制造系 学士
工作经历
2006.5-2006.11 香港大学 工程学院 科研合作
2007.7-2010.4 沈阳航空航天大学 航空宇航工程学院 副教授
2008.5-2008.8 香港大学 工程学院 科研合作
2009.5-2009.8 香港大学 工程学院 科研合作
2010.4-2012.6 沈阳航空航天大学 航空宇航工程学院 内聘教授
2010.5-2011.4 香港大学 工程学院 博士后
2011.7-至今 大连理工大学 工程力学系 博士生导师
2011.9-2011.10 香港大学 工程学院 科研合作
2012.07-至今 沈阳航空航天大学 航空航天工程学部 教授
2013.05-2013.08 香港大学 工程学院 科研合作
主要学术成果:
科研项目
1. 国家自然科学基金青年基金,复合材料层合板精化高阶理论和分层分析,No. **,200901-201112,负责人。
2. 国家自然科学基金面上项目,预先满足层间应力连续的C0型整体-局部高阶理论,No. **,201301-201612,负责人。
3. 航空科学基金,飞机大厚度复合材料层合及夹层结构理论和计算,No. 2008ZA54003,200810-201009,负责人。
4. 辽宁省博士启动基金,先进复合材料层合结构理论模型和精化元法,No. **,200810-201012,负责人。
5. 辽宁省高等学校优秀人才支持计划,大变形且含界面破坏轻质复合材料精细分析方法及飞机结构设计应用,No. LR201033,201006-201212,负责人。
6. 飞机复合材料结构理论和验证(总装备部“十一五”国家重点项目),排名第二。
7. 某发动机的关键部件的结构分析研究,排名第二。
发表论文
自2005年以来在国内外期刊上发表科研学术论文40篇(含接收文章,其中SCI检索33篇,第一作者SCI论文25篇)。
? 发表到SCI中科院分区表(2012年度)工程技术类中二区文章16篇:
1. Wu Zhen, Tian Li, C0-type global-local higher order theory with the inclusion of transverse normal thermal strain, Composite Structures, 2013; 101: 157-167. (SCI,影响因子:2.24)
2. Wu Zhen, Chen Wanji and Ren Xiaohui, An accurate higher-order theory and C0 finite element for free vibration analysis of laminated composite and sandwich plates. Composite Structures, 2010; 92(6):1299-1307. (SCI,影响因子:2.24)
3. Wu Zhen and Chen Wanji, A C0-type higher-order theory for bending analysis of laminated composite and sandwich plate. Composite Structures, 2010; 92:653-661. (SCI,影响因子:2.24)
4. Wu Zhen and Chen Wanji, Stress analysis of laminated composite plates with a circular hole according to a single-layer higher-order model. Composite Structures, 2009; 90:122-129. (SCI,影响因子:2.24)
5. Wu Zhen, Chen Wanji and Ren Xiaohui, Refined global-local higher-order theory for angle-ply laminated plates under thermo-mechanical loads and finite element model, Composite Structures. 2009; 88:643-658. (SCI,影响因子:2.24)
6. Wu Zhen, Chen Wanji, A global-local higher order theory for multilayered shells and the analysis of laminated cylindrical shell panels. Composite Structures, 2008; 84:350-361. (SCI,影响因子:2.24)
7. Wu Zhen, Chen Wanji, An assessment of several displacement-based theories for the vibration and stability analysis of laminated composite and sandwich beams. Composite Structures, 2008; 84:337-349. (SCI,影响因子:2.24)
8. Wu Zhen, Y. K. Cheung, SH Lo and Chen Wanji, Effects of higher-order global-local shear deformations on bending, vibration and buckling of multilayered plates, Composite Structures. 2008; 82:277-289. (SCI,影响因子:2.24)
9. Wu Zhen, Chen Wanji, A study of global-local higher-order theory for laminated composite plates. Composite Structures, 2007; 79:44-54. (SCI,影响因子:2.24)
10. Wu Zhen, Chen Wanji, Refined triangular element for laminated elastic-piezoelectric plates. Composite Structures, 2007; 78:129-139. (SCI,影响因子:2.24)
11. Wu Zhen, Chen Wanji,Refined global-local higher-order theory and finite element for laminated plates, International Journal Numerical Methods in Engineering, 2007; 69:1627-1670. (SCI,影响因子:2.009)
12. Wu Zhen, Chen Wanji, An efficient higher-order theory and finite element for laminated plates subjected to thermal loading, Composite Structures, 2006;73:99-109. (SCI,影响因子:2.24)
13. Wu Zhen, Chen Ronggeng, Chen Wanji, Refined laminated composite plate element based on global-local higher-order shear deformation theory. Composite Structures, 2005; 70:135-152. (SCI,影响因子:2.24)
14. SH Lo, Wu Zhen, YK Cheung and Chen Wanji, An enhanced global-local higher-order theory for the free edge effect in laminates, Composite Structures. 2007; 81:499-510. (SCI,影响因子:2.24)
15. SH Lo, Wu Zhen, YK Cheung, Chen WJ, Hygrothermal effects on thick multilayered composite plates using a refined higher order theory. Composite Structures, 2010; 92:633-646. (SCI,影响因子:2.24)
16. SH Lo, Wu Zhen, KY Sze, Chen Wanji, An improved in-plane displacement model for the stability analysis of laminated composites with general lamination configurations. Composite Structures, 2011; 93:1584-1594 (SCI,影响因子:2.24)
? 发表到SCI中科院分区表(2012年度)工程技术类中三区的文章11篇:
17. Wu Zhen and Chen Wanji, A higher-order displacement model for stress concentration problems in general lamination configurations. Materials&Design, 2009; 30:1458-1467. (SCI,影响因子:2.20)
18. Wu Zhen, YK Cheung, SH Lo, Chen Wanji, On the thermal expansion effects in the transverse direction of laminated composite plates by means of a global–local higher-order model, International Journal of Mechanical Science, 2010; 52:970-981. (SCI,影响因子:1.231)
19. Wu Zhen, Chen Wanji,Thermomechanical buckling of laminated composite and sandwich plates using global-local higher order theory, International Journal of Mechanical Science, 2007; 49:712-721. (SCI,影响因子:1.231)
20. Wu Zhen, Y. K. Cheung, SH Lo and Chen Wanji, Thermal stress analysis for laminated plates using actual temperature field, International Journal of Mechanical Science, 2007; 49:1276-1288. (SCI,影响因子:1.231)
21. Wu Zhen, Chen Wanji,Free vibration of laminated composite and sandwich plates using global-local higher-order theory, Journal of Sound and Vibration, 2006; 298: 333-349. (SCI,影响因子:1.857)
22. Wu Zhen, Chen Wanji, A global-local higher order theory including interlaminar stress continuity and C0 plate bending element. Computational Mechanics, 2010, 45: 387-400. (SCI,影响因子:2.065)
23. Wu Zhen, Chen Wanji,Buckling analysis of angle-ply composite and sandwich plates by combination of geometric stiffness matrix, Computational Mechanics, 2007; 39(6): 839-848. (SCI,影响因子:2.065)
24. Wu Zhen, SH Lo, YK Cheung, Chen Wanji, A higher order finite element including transverse normal strain for linear elastic composite plates with general lamination configurations. Finite Element in Analysis and Design. 2012; 48:1346-1357 (SCI,影响因子:1.058)
25. SH Lo, Wu Zhen, KY Sze, Chen Wanji, C0-type global-local theory with non-zero normal strain for the analysis of thick multilayer composite plates. Computational Mechanics, 2011; 47:479-491. (SCI,影响因子:2.065)
26. Wu Zhen, Chen Wanji, A higher-order theory and refined finite element for functionally graded composite laminates, European Journal Mechanics- A/Solids, 2006; 25:447-463. (SCI,影响因子:1.484)
27. Wu Zhen, Chen Wanji,Free vibration of laminated composite and sandwich plates using global-local higher-order theory, Journal of Sound and Vibration, 2006; 298: 333-349. (SCI,影响因子:1.588)
? 发表到SCI中科院分区表(2012年度)工程技术类中四区的文章6篇:
28. Wu Zhen, SH Lo, KY Sze, Influence of transverse normal strain and temperature profile on thermoelasticity of sandwiches, Journal of Thermal Stresses, 2013; 36: 19-36. (SCI,影响因子:0.805)
29. Ren Xiaohui, Chen Wanji, Wu Zhen, A new zig-zag theory and C0 plate bending element for composite and sandwich plates. Archive of Applied Mechanics, 2011; 81:185-197 (SCI,影响因子:0.95)
30. Ren Xiaohui, Chen Wanji, Wu Zhen, A C0-type zig-zag theory and finite element for laminated composite and sandwich plates with general configurations. Archive of Applied Mechanics, 2012; 82:391-406. (SCI,影响因子:0.95)
31. SH Lo, Wu Zhen, KY Sze, An enhanced Reddy’s theory for composite plates subjected to temperature load, Mechanics of Advanced Materials and Structures (Accepted)
32. Wu Zhen, Zhu Hong, Chen Wanji, An advanced higher-order theory for laminated composite plates with general lamination angle, Acta Mechanica Sinica, 2011; 27:720-729 (SCI,影响因子:0.86)
33. Chen Wanji, Wu Zhen, A new higher-order shear deformation theory and refined beam element of composite laminates, Acta Mechanica Sinica, 2005; 21:65-69.
? 其他文章8篇:
34. 吴振,赵彧,增强型Reddy层合梁理论与热应力分析,复合材料学报, 2012, 29:246-250. (EI,一级学报)
35. 吴振,陈万吉,新型整体-局部高阶剪切变形理论及层合板精化三角形单元,计算力学学报,2005,22(6), 639-645. (EI,一级学报)
36. 吴振,陈万吉,夹层板结构层间应力数值分析,大连理工大学学报,2006, 46:313-318. (EI)
37. Chen Wanji, Wu Zhen, A selective review on recent development of displacement-based laminated plate theories, Recent Patents on Mechanical Engineering, 2008; 1:29-44.
38. 吴振,徐铮,考虑横法向热应变的C0型整体-局部高阶层合梁理论,计算力学学报,(已接受,一级学报)
39. Chen Wanji, Wu Zhen: Higher order global-local theory coupled bending and extension for laminated composite plates and refined element methods. Proceedings of the 8th Biennial ASME Conference on Engineering Systems Design and Analysis, Italy, July 2006. (EI)
40. Wu Zhen, Lin Kun, An efficient C0 finite element formulation for thermal stress analysis of laminated composite and sandwich plates, Journal of Aerospace Engineering (修改稿已寄出).
41. Wu Zhen, SH Lo, Ren Xiaohui, Effects of displacement parameters in zig-zag theories on displacements and stresses of laminated composites, Composite Structures (已投稿)
删除或更新信息,请邮件至freekaoyan#163.com(#换成@)
沈阳航空航天大学研究生导师简介-吴振
沈阳航空航天大学 免费考研网/2016-05-08
相关话题/工程学院 科研 结构 大连理工大学 计算
沈阳航空航天大学安全工程学院2016年研究生复试安排
安全工程学院2016年研究生复试安排 一、复试考生(一)一志愿考生符合《2016年全国硕士研究生统一入学考试复试分数线》的合格考生(二)调剂考生 通过中国研究生招生信息网调剂系统接收并确认我校复试通知的合格考生二、复试流程(一)3月23日上午报到时间:8:30-11:30 地点:安全工程学院(经管楼 ...沈阳航空航天大学 本站小编 免费考研网 2016-05-08沈阳航空航天大学机电工程学院2016年硕士研究生入学考试复试安排
机电工程学院2016年硕士研究生入学考试复试安排 一、复试考生(一)一志愿考生符合《2016年全国硕士研究生招生考试考生进入复试的初试成绩基本要求》的合格考生(见我校研究生学院网站《2016年硕士研究生招生一志愿复试考生名单》)(二)调剂考生 通过中国研究生招生信息网调剂系统接收并确认我校复试 ...沈阳航空航天大学 本站小编 免费考研网 2016-05-08沈阳航空航天大学计算机学院2016年研究生复试安排
计算机学院2016年研究生复试安排 一、复试考生(一)一志愿考生符合《2016年全国硕士研究生统一入学考试复试分数线》的合格考生(见我校研究生学院网站《2016年硕士研究生招生一志愿复试考生名单》)(二)调剂考生 通过中国研究生招生信息网调剂系统接收并确认我校复试通知的合格考生二、复试流程(一) ...沈阳航空航天大学 本站小编 免费考研网 2016-05-08沈阳航空航天大学电子信息工程学院2016年研究生复试安排
电子信息工程学院 2016年研究生复试安排 一、复试考生(一)一志愿考生符合《2016年全国硕士研究生统一入学考试复试分数线》的合格考生(见我校研究生学院网站《2016年硕士研究生招生一志愿复试考生名单》)(二)调剂考生 通过中国研究生招生信息 ...沈阳航空航天大学 本站小编 免费考研网 2016-05-08沈阳化工大学能源与动力工程学院老师好,请问化工过程机械、流体机械及工程历年复试分数线大概是多少?录取
动力工程及工程热物理21***cn09-23 16:56能源与动力工程学院老师好,请问化工过程机械、流体机械及工程历年复试分数线大概是多少?录取比呢?化工原理(2)含实验指是什么意思?材料力学指定版本吗?有真题吗?谢谢了【回复】 亲,您好: 化工过程机械、流体机械及工程都是一级学科 动力工程及工程 ...沈阳化工大学 21***cn 沈阳化工大学 2016-05-08沈阳化工大学计算机科学与技术学院老师你好 请问软件工程专业的复试分数线是多少呢? 单科分数的要求是什么
复试分数线63***om09-24 11:56计算机科学与技术学院老师你好 请问软件工程专业的复试分数线是多少呢? 单科分数的要求是什么样的呢? 贵校有推荐参考书目吗?【回复】 亲,您好: 软件工程,近两年单科和总分的复试分数线都是国家A类地区分数线,参考书目请拨打024-89388481咨询(计 ...沈阳化工大学 63***om 沈阳化工大学 2016-05-08沈阳化工大学计算机科学与技术学院请问贵校去年软件工程专业报录比如何
关于报录比63***om09-24 11:56计算机科学与技术学院请问贵校去年软件工程专业报录比如何【回复】 亲,您好: 软件工程,近两年复试分数线都是国家A类地区分数线,复试成功几率很大。 ...沈阳化工大学 63***om 沈阳化工大学 2016-05-08沈阳化工大学能源与动力工程学院老师好,请问化工过程机械历年复试分数线大概是多少?报考人数?录取比呢?
化工过程机械?21***cn09-24 13:43能源与动力工程学院老师好,请问化工过程机械历年复试分数线大概是多少?报考人数?录取比呢?化工原理(2)含实验什么意思?提供真题吗?复试科目有哪些?谢谢了【回复】 亲,您好: 化工过程机械是一级学科动力工程及工程热物理中的一个研究方向,近两年复试分数 ...沈阳化工大学 21***cn 沈阳化工大学 2016-05-08沈阳化工大学能源与动力工程学院老师好,材料力学指定使用哪个课本吗?
动力工程及工程热物理21***cn09-24 13:49能源与动力工程学院老师好,材料力学指定使用哪个课本吗?【回复】 亲,您好: 材料力学指定课本请拨打024-89385661(能源与动力工程学院),找唐老师咨询。 ...沈阳化工大学 21***cn 沈阳化工大学 2016-05-08沈阳航空航天大学计算机技术专业学位招生人数是多少呀?要求四级吗
招生人数z6***4809-16 14:09计算机技术专业学位招生人数是多少呀?要求四级吗【回复】 招生人数须按照教育部2013年下达的招生计划制定,现无法确定。2012年我校计算机技术招生7人。 ...沈阳航空航天大学 z6***48 沈阳航空航天大学 2016-05-08