基本信息Personal Information
副教授硕士生导师
主要任职：无
性别：男
毕业院校：清华大学
学位：博士
在职信息：在职
所在单位：材料科学与工程学院
学科：材料加工工程
办公地点：辽宁省凝固控制与数字化制备技术重点实验室/大连理工大学铸造中心401
联系方式：**
电子邮箱：
扫描关注
同专业硕导个人学术主页
个人简介Personal Profile
男，工学博士（清华大学，2014.01），大连理工大学材料科学与工程学院，特聘研究员。2014年至2017年先后在美国亚利桑那州立大学(Arizona State University)和英国曼彻斯特大学(University of Manchester)在博士后/研究助理岗位上从事科研工作，2017年12月以大连理工大学“星海青千”人才计划从海外全职引进，参加工作至今。主要从事以下领域的研究工作：
（1）仿生材料结构设计与制备技术
（2）耐蚀合金开发与应用
（3）材料微结构演化同步辐射多维多尺度表征与定量化
承担的在研科研项目包括：主持国家自然科学基金面上项目1项，青年基金项目1项，中央高校基本科研业务费1项（人才专题）；以子课题负责人参与国家重点研发计划项目2项，国家自然科学基金重点项目1项。完成结题项目包括国际合作项目1项（欧盟第7框架国际合作项目），企业项目3项（美国通用公司，英国联合利华等）等。
发表SCI论文50篇，第一作者/通讯作者论文主要发表在Acta Materialia、Corrosion Science、Materials Science and Engineering A、Journal of Alloys and Compounds等冶金领域国际知名SCI学术期刊，另有合著论文发表在Acta Mater,npj Computational Materials、Carbon等材料领域知名SCI期刊上。受邀在美国、英国、希腊等举办的材料领域国际学术会议上做报告9次，国内学术报告10余次；担任《材料工程》、《航空材料学报》期刊青年编委和《失效分析与预防》期刊编委；担任中国材料大会同步辐射与中子分会主席1次；开发工程应用软件一套；受邀担任包括Acta Mater., J. Mater. Chem. C,Mater. Sci.Eng. A, J. Alloys Compd, Mater. Charact, J Mater. Sci. Tech., J. Mater. Sci. 等在内的12个SCI期刊的审稿人。
【部分代表性论文】
[1] E. Guo*, S. Shuai, D. Kazantsev, S. Karagadde, A.B. Phillion, T. Jing, W. Li, P.D. Lee*. The influence of nanoparticles on dendritic grain growth in Mg alloys. Acta Materialia, 2018.06, 152: 127-137. IF: 7.293.
[2] E. Guo*, A.B. Phillion, B. Cai, S. Shuai, D. Kazantsev, T. Jing, P.D. Lee*, Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography, Acta Materialia, 2017.01, 123: 373-382. IF: 7.293.
[3] S. Shuai, E. Guo*, J. Wang*, A.B. Phillion, T. Jing*, Z. Ren, P.D. Lee*. Synchrotron tomographic quantification of the influence of Zn concentration on dendritic growth in Mg-Zn alloys. Acta Materialia, 2018.09, 156: 287-296. IF: 7.293.
[4] S. Shuai, E. Guo*, A.B. Phillion, M.D. Callaghan, T. Jing*, P.D. Lee*, Fast synchrotron X-ray tomographic quantification of dendrite evolution during the solidification of Mg-Sn alloys, Acta Materialia, 2016.10, 118: 260-269. IF: 7.293.
[5]Xuejian Wang, Zongning Chen, Jing Ren, Huijun Kang, Enyu Guo*, Jiehua Li, Tongmin Wang**. Corrosion behavior of as-cast Mg–5Sn based alloys with In additions in 3.5 wt% NaCl solution. Corrosion Science, 2020, 164: 108318.
[6]Fenfen Yang, Huijun Kang, Zongning Chen,Enyu Guo*, Yanhua Zeng, Wei Wang,Tongmin Wang*. Electrochemical corrosion mechanisms of nickel-aluminium bronze with different nickel contents using the rotating disc electrode. Corrosion Science, 2019,157: 438-449.IF=6.355.
[7]Pengqi Wang, Enyu Guo*, Xuejian Wang, Huijun Kang, Zongning Chen, Zhiqiang Cao, Tongmin Wang**. The influence of Sc addition on microstructure and tensile mechanical properties of Mg-4.5Sn-5Zn alloys, Journal of Magnesium and Alloys, 2019, 7(3)：456-465. IF=4.523.
[8]Minqing Gao, Zongning Chen, Huijun Kang, Enyu Guo*, Rengeng Li, Ying Fu, Honglan Xie, Tongmin Wang*. Microstructural characteristics and mechanical behavior of B4Cp/6061Al compositessynthesized at different hot-pressing temperatures. Journal of Materials Science& Technology, 2019.08,35(8):1523-1531. IF=5.04
[9]Shuang Nie, Bingyang Gao, Xuejian Wang, Zhiqiang Cao*,Enyu Guo*, and Tongmin Wang. The influence of holding time on the microstructure evolution of Mg-10Zn-6.8Gd-4Y alloy during semi-solid isothermal heat treatment. Metals, 2019.04, 9: 420. IF=2.259.
[10] E. Guo, S.S. Singh, C. Mayer, X. Meng, Y. Xu, L. Luo, M. Wang*, N. Chawla*, Effect of gallium addition on the microstructure and micromechanical properties of constituents in Nb-Si based alloys, Journal of Alloys and Compounds, 2017.05, 704: 89-100. IF: 4.175.
[11] E. Guo, S.S. Singh, C.S. Kaira, X. Meng, Y. Xu, L. Luo, M. Wang*, N. Chawla*. Mechanical properties of microconstituents in Nb-Si-Ti alloy by micropillar compression and nanoindentation. Materials Science and Engineering A, 2017.02, 687: 99-106. IF: 4.081.
[12] E. Guo, H.-X. Xie, S.S. Singh, A. Kirubanandham, T. Jing, N. Chawla*, Mechanical characterization of microconstituents in a cast duplex stainless steel by micropillar compression, Materials Science and Engineering A, 2014.03, 598: 98-105. IF: 4.081.
[13] M. Gao, H. Kang, Z. Chen, E. Guo*, P. Peng, T.Wang*. Effect of reinforcement content and aging treatment on microstructure and mechanical behavior of B4Cp/6061Al composites, Materials Science and Engineering A, 2019, 744: 682-690. IF: 4.081.
[14] E. Guo, M. Wang, T. Jing, N. Chawla*, Temperature-dependent mechanical properties of an austenitic-ferritic stainless steel studied by in situ tensile loading in a scanning electron microscope (SEM), Materials Science and Engineering A, 2013.09, 580: 159-168. IF: 4.081.
[15] S. Shuai, E. Guo*, Q. Zheng, M. Wang, T. Jing*.Characterisation of three-dimensional dendritic morphology and orientation selection of α-Mg in Mg–Ca alloy using synchrotron X-ray tomography, Materials Characterization, 2016.01, 111: 170-176. IF: 3.22.
[16] E. Guo, N. Chawla, T. Jing, S. Torquato, Y. Jiao*. Accurate modeling and reconstruction of three-dimensional percolating filamentary microstructures from two-dimensional micrographs via dilation-erosion method. Materials Characterization, 2014.03, 89: 33-42. IF: 3.22.
[17] Y. Xu*, L. Wei, B. Han, E. Guo*, M. Wang, Y. Su. Effect of a traveling magnetic field on micropore formation in Al-Cu alloys. Metals, 2018.06, 8(6):488. IF: 2.259.
[18] E. Guo*, G. Zeng, D. Kazantsev, P. Rockett, J. Bent, Mark Kirkland, G. Van Dalen, D.S. Eastwood, D. StJohn, P. D. Lee*. Synchrotron X-ray tomographic quantification of microstructural evolution in ice cream-a multi-phase soft solid. RSC Advances, 2017, 7(25): 15561-15573. IF: 3.049.
[19] E. Guo*, D. Kazantsev, J. Mo, J. Bent, G.V. Dalen, P. Schuetz, P. Rockett, D. StJohn, P.D. Lee*. Revealing the microstructural stability of a three-phase soft solid (ice cream) by 4D synchrotron X-ray tomography, Journal of Food Engineering, 2018.11, 237: 204-214.IF: 3.625.
[20] E. Guo, S.S. Singh, H. Xie, J.J. Williams, T. Jing, N. Chawla*. Microstructure-based modeling of deformation in steels based on constitutive relationships from micropillar compression. Steel Research International, 2014.06, 85(6): 946-953. IF: 1.522.
本课题组长期招收博士生、学硕和专硕，诚挚欢迎各位同学推免或报考！
（注：2020年硕士研究生尚有名额，欢迎同学们咨询！）
联系方式：郭恩宇，eyguo@dlut.edu.cn，大连理工大学铸造中心401
教育经历Education Background
工作经历Work Experience
2008.92014.1
清华大学
材料加工工程
博士
2004.92008.6
华中科技大学
材料成型及控制工程
学士
2019.7至今
大连理工大学材料科学与工程学院
副教授
2017.122019.7
大连理工大学材料学院
特聘研究员
2014.92017.11
英国曼彻斯特大学
研究助理
2014.32014.8
美国亚利桑那州立大学
博士后
研究方向Research Focus
社会兼职Social Affiliations
仿生材料结构设计与制备技术
耐蚀合金开发与应用
材料微结构演化同步辐射多维多尺度表征与定量化
团队成员Research Group
金属凝固电磁控制团队基本信息Personal Information
副教授硕士生导师
主要任职：无
性别：男
毕业院校：清华大学
学位：博士
在职信息：在职
所在单位：材料科学与工程学院
学科：材料加工工程
办公地点：辽宁省凝固控制与数字化制备技术重点实验室/大连理工大学铸造中心401
联系方式：**
电子邮箱：
扫描关注
同专业硕导个人学术主页
当前位置: 中文主页 >> 科学研究
研究领域
暂无内容
论文成果 More>>
Yang, Xiong,Wang, Tongmin,Jiang, Zhou,Kang, Huijun,Chen, Zongning,Guo, Enyu,Liu, Daquan,Yang, Fenfen,Li, Rengeng,Jiang, Xue.Enhanced Thermoelectric Performance of Zr1-xTaxNiSn Half-Heusler Alloys by Diagonal-Rule Doping[J],ACS APPLIED MATERIALS & INTERFACES,2020,12(3):3773-3783
Zhao, Kai,Kang, Huijun,Wu, Yihong,Liu, Mengmeng,Guo, Enyu,Chen, Zongning,Wang, Tongmin.Manipulating the particle distribution of in situ TiB2p/Al composites via acoustic vibration and cooling rate[J],MATERIALS LETTERS,2020,262
Gao, Minqiang,Kang, Huijun,Chen, Zongning,Guo, Enyu,Fu, Ying,Xu, Yanjin,Wang, Tongmin.Enhanced strength-ductility synergy in a boron carbide reinforced aluminum matrix composite at 77 K[J],JOURNAL OF ALLOYS AND COMPOUNDS,2020,818
Gao, Bingyang,Guo, Enyu,Meng, Xiangrui,Nie, Shuang,Liang, Hui,Cao, Zhiqiang,Wang, Tongmin.Grain nucleation and growth behavior of (Cu, Ni)(6)Sn-5 in Sn-10Cu-1Ni alloy under pulse current: An in situ observation[J],MATERIALS CHARACTERIZATION,2019,158
Wang, Pengqi,Guo, Enyu,Wang, Xuejian,Kang, Huijun,Chen, Zongning,Cao, Zhiqiang,Wang, Tongmin.The influence of Sc addition on microstructure and tensile mechanical properties of Mg-4.5Sn-5Zn alloys[J],JOURNAL OF MAGNESIUM AND ALLOYS,2019,7(3):456-465
Phillion, A. B.,Shuai, Sansan,Guo, Enyu,Wang, Jiang,Jing, Tao,Ren, Zhongming,Neumann-Heyme, H.,Beckermann, C.,Lee, P. D..Synchrotron tomographic quantification of the influence of Zn concentration on dendritic growth in Mg-Zn alloys (vol 156, pg 287, 2018)[J],ACTA MATERIALIA,2019,165:751-752
专利
暂无内容
著作成果
暂无内容
科研项目
双级尺寸B4C陶瓷颗粒增强6061铝基复材的制备与强韧化机制研究, 国家自然科学基金项目, 2019/08/16, 进行
镁合金三维枝晶形成及变形对微／纳第二相陶瓷颗粒的响应机制, 国家自然科学基金项目, 2019/08/16, 进行
高导热耐辐照铜合金高效制备关键技术, 国家科技部 , 2018/05/09, 进行
CFETR偏滤器部件新型候选材料研制, 国家科技部 , 2018/12/01, 进行
高强韧高导大尺寸铜基复合材料的制备基础研究, 国家自然科学基金项目, 2018/08/17, 进行
高性能6082铝合金预拉伸板研制-细晶化与热轧研究, 企事业单位委托科技项目, 2018/07/20-2020/12/30, 进行
科研团队
暂无内容
基本信息Personal Information
副教授硕士生导师
主要任职：无
性别：男
毕业院校：清华大学
学位：博士
在职信息：在职
所在单位：材料科学与工程学院
学科：材料加工工程
办公地点：辽宁省凝固控制与数字化制备技术重点实验室/大连理工大学铸造中心401
联系方式：**
电子邮箱：
扫描关注
同专业硕导个人学术主页
研究领域
当前位置: 中文主页 >> 科学研究 >> 研究领域基本信息Personal Information
副教授硕士生导师
主要任职：无
性别：男
毕业院校：清华大学
学位：博士
在职信息：在职
所在单位：材料科学与工程学院
学科：材料加工工程
办公地点：辽宁省凝固控制与数字化制备技术重点实验室/大连理工大学铸造中心401
联系方式：**
电子邮箱：
扫描关注
同专业硕导个人学术主页
论文成果
当前位置: 中文主页 >> 科学研究 >> 论文成果[1]Yang, Xiong,Wang, Tongmin,Jiang, Zhou,Kang, Huijun,Chen, Zongning,Guo, Enyu,Liu, Daquan,Yang, Fenfen,Li, Rengeng,Jiang, Xue.Enhanced Thermoelectric Performance of Zr1-xTaxNiSn Half-Heusler Alloys by Diagonal-Rule Doping[J],ACS APPLIED MATERIALS & INTERFACES,2020,12(3):3773-3783
[2]Zhao, Kai,Kang, Huijun,Wu, Yihong,Liu, Mengmeng,Guo, Enyu,Chen, Zongning,Wang, Tongmin.Manipulating the particle distribution of in situ TiB2p/Al composites via acoustic vibration and cooling rate[J],MATERIALS LETTERS,2020,262
[3]Gao, Minqiang,Kang, Huijun,Chen, Zongning,Guo, Enyu,Fu, Ying,Xu, Yanjin,Wang, Tongmin.Enhanced strength-ductility synergy in a boron carbide reinforced aluminum matrix composite at 77 K[J],JOURNAL OF ALLOYS AND COMPOUNDS,2020,818
[4]Gao, Bingyang,Guo, Enyu,Meng, Xiangrui,Nie, Shuang,Liang, Hui,Cao, Zhiqiang,Wang, Tongmin.Grain nucleation and growth behavior of (Cu, Ni)(6)Sn-5 in Sn-10Cu-1Ni alloy under pulse current: An in situ observation[J],MATERIALS CHARACTERIZATION,2019,158
[5]Wang, Pengqi,Guo, Enyu,Wang, Xuejian,Kang, Huijun,Chen, Zongning,Cao, Zhiqiang,Wang, Tongmin.The influence of Sc addition on microstructure and tensile mechanical properties of Mg-4.5Sn-5Zn alloys[J],JOURNAL OF MAGNESIUM AND ALLOYS,2019,7(3):456-465
[6]Phillion, A. B.,Shuai, Sansan,Guo, Enyu,Wang, Jiang,Jing, Tao,Ren, Zhongming,Neumann-Heyme, H.,Beckermann, C.,Lee, P. D..Synchrotron tomographic quantification of the influence of Zn concentration on dendritic growth in Mg-Zn alloys (vol 156, pg 287, 2018)[J],ACTA MATERIALIA,2019,165:751-752
[7]Gao, Minqiang,Kang, Huijun,Chen, Zongning,Guo, Enyu,Peng, Peng,Wang, Tongmin.Effect of reinforcement content and aging treatment on microstructure and mechanical behavior of B4Cp/6061Al composites[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2019,744:682-690
[8]Li, Rengeng,Guo, Enyu,Chen, Zongning,Kang, Huijun,Wang, Wei,Zou, Cunlei,Li, Tingju,Wang, Tongmin.Optimization of the balance between high strength and high electrical conductivity in CuCrZr alloys through two-step cryorolling and aging[J],JOURNAL OF ALLOYS AND COMPOUNDS,2019,771:1044-1051
[9]Guo, Enyu,Kazantsev, Daniil,Mo, Jingyi,Bent, Julian,Van Dalen, Gerard,Schuetz, Peter,Rockett, Peter,StJohn, David,Lee, Peter D..Revealing the microstructural stability of a three-phase soft solid (ice cream) by 4D synchrotron X-ray tomography[J],JOURNAL OF FOOD ENGINEERING,2018,237:204-214
[10]Wang, Wei,Chen, Zong-Ning,Guo, En-Yu,Kang, Hui-Jun,Liu, Yi,Zou, Cun-Lei,Li, Ren-Geng,Yin, Guo-Mao,Wang, Tong-Min.Influence of Cryorolling on the Precipitation of Cu-Ni-Si Alloys: An In Situ X-ray Diffraction Study[J],ACTA METALLURGICA SINICA-ENGLISH LETTERS,2018,31(10):1089-1097
[11]Mo, Jingyi,Guo, Enyu,McCartney, D. Graham,Eastwood, David S.,Bent, Julian,Van Dalen, Gerard,Schuetz, Peter,Rockett, Peter,Lee, Peter D..Time-Resolved Tomographic Quantification of the Microstructural Evolution of Ice Cream[J],MATERIALS,2018,11(10)
[12]Wang, Wei,Guo, Enyu,Chen, Zongning,Kang, Huijun,Chen, Zhongjun,Zou, Cunlei,Li, Rengeng,Yin, Guomao,Wang, Tongmin.Correlation between microstructures and mechanical properties of cryorolled CuNiSi alloys with Cr and Zr alloying[J],MATERIALS CHARACTERIZATION,2018,144:532-546
[13]Shuai, Sansan,Guo, Enyu,Wang, Jiang,Phillion, A. B.,Jing, Tao,Ren, Zhongming,Lee, Peter D..Synchrotron tomographic quantification of the influence of Zn concentration on dendritic growth in Mg-Zn alloys[J],ACTA MATERIALIA,2018,156:287-296
[14]Han, Bao-Shuai,Xu, Yan-Jin,Guo, En-Yu,Jing, Tao,Hou, Hong-Liang,Luo, Liang-Shun.Microstructure and Mechanical Properties of Tortoise Carapace Structure Bio-Inspired Hybrid Composite[J],ACTA METALLURGICA SINICA-ENGLISH LETTERS,2018,31(9):945-952
[15]Kang, Huijun,Wang, Tongmin,Li, Jinling,Liu, Yinqiao,Guo, Enyu,Chen, Zongning,Liu, Daquan,Fan, Guohua,Zhang, Yuwei,Jiang, Xue.Optimizing the thermoelectric transport properties of BiCuSeO via doping with the rare-earth variable-valence element Yb[J],JOURNAL OF MATERIALS CHEMISTRY C,2018,6(31):8479-8487
[16]Wang, Binbin,Fu, Hengzhi,Luo, Liangshun,Guo, Enyu,Su, Yanqing,Wang, Mingyue,Ritchie, Robert O.,Dong, Fuyu,Wang, Liang,Guo, Jingjie.Nanometer-scale gradient atomic packing structure surrounding soft spots in metallic glasses[J],NPJ COMPUTATIONAL MATERIALS,2018,4(1)
[17]Yang, Fenfen,Kang, Huijun,Guo, Enyu,Li, Rengeng,Chen, Zongning,Zeng, Yanhua,Wang, Tongmin.The role of nickel in mechanical performance and corrosion behaviour of nickel-aluminium bronze in 3.5 wt.% NaCl solution[J],CORROSION SCIENCE,2018,139:333-345
[18]Guo, Enyu,Shuai, Sansan,Kazantsev, Daniil,Karagadde, Shyamprasad,Phillion, A. B.,Jing, Tao,Li, Wenzhen,Lee, Peter D..The influence of nanoparticles on dendritic grain growth in Mg alloys[J],ACTA MATERIALIA,2018,152:127-137
[19]Xu, Yanjin,Wei, Lijun,Han, Baoshuai,Guo, Enyu,Wang, Mingyue,Su, Yanqing.Effect of a Traveling Magnetic Field on Micropore Formation in Al-Cu Alloys[J],METALS,2018,8(6)
[20]Han, Baoshuai,Guo, Enyu,Xue, Xiang,Zhao, Zhiyong,Li, Tiejun,Xu, Yanjin,Luo, Liangshun,Hou, Hongliang.Fabricating and strengthening the carbon nanotube/copper composite fibers with high strength and high electrical conductivity[J],APPLIED SURFACE SCIENCE,2018,441:984-992
共23条1/2首页上页下页尾页页
基本信息Personal Information
副教授硕士生导师
主要任职：无
性别：男
毕业院校：清华大学
学位：博士
在职信息：在职
所在单位：材料科学与工程学院
学科：材料加工工程
办公地点：辽宁省凝固控制与数字化制备技术重点实验室/大连理工大学铸造中心401
联系方式：**
电子邮箱：
扫描关注
同专业硕导个人学术主页
专利
当前位置: 中文主页 >> 科学研究 >> 专利共0条0/0
基本信息Personal Information
副教授硕士生导师
主要任职：无
性别：男
毕业院校：清华大学
学位：博士
在职信息：在职
所在单位：材料科学与工程学院
学科：材料加工工程
办公地点：辽宁省凝固控制与数字化制备技术重点实验室/大连理工大学铸造中心401
联系方式：**
电子邮箱：
扫描关注
同专业硕导个人学术主页
著作成果
当前位置: 中文主页 >> 科学研究 >> 著作成果共0条0/0
基本信息Personal Information
副教授硕士生导师
主要任职：无
性别：男
毕业院校：清华大学
学位：博士
在职信息：在职
所在单位：材料科学与工程学院
学科：材料加工工程
办公地点：辽宁省凝固控制与数字化制备技术重点实验室/大连理工大学铸造中心401
联系方式：**
电子邮箱：
扫描关注
同专业硕导个人学术主页
科研项目
当前位置: 中文主页 >> 科学研究 >> 科研项目双级尺寸B4C陶瓷颗粒增强6061铝基复材的制备与强韧化机制研究, 国家自然科学基金, 2019/08/16, 进行
镁合金三维枝晶形成及变形对微／纳第二相陶瓷颗粒的响应机制, 国家自然科学基金, 2019/08/16, 进行
高导热耐辐照铜合金高效制备关键技术, 国家重点研发计划, 2018/05/09, 进行
CFETR偏滤器部件新型候选材料研制, 国家重点研发计划, 2018/12/01, 进行
高强韧高导大尺寸铜基复合材料的制备基础研究, 国家自然科学基金, 2018/08/17, 进行
高性能6082铝合金预拉伸板研制-细晶化与热轧研究, 2018/07/20-2020/12/30, 进行
共6条1/1首页上页下页尾页
