●姓名:
王鸿雨
● 教育背景:
2008.09—2012.06东北大学，本科，材料成型及控制工程；
2012.09—2014.06东北大学，硕士，材料加工；
2014.09—2018.01东北大学，博士，材料加工；
2016.09—2017.08 Seoul National University，国家公派联合培养博士研究生，材料力学。
? 工作经历：
2018.04—至今大连海事大学，交通运输工程学院，材料科学与工程系，讲师。
? 邮箱：
Email address: wanghongyu@dlmu.edu.cn
? 电话：
**
? 发表论文：
1. Wang Hongyu*, Teng Fei, Wei Zhen, Zhang Pengchao, Sun Juncai, Ji Shijun. Simulation research about rubber pad forming of corner channel with convex or concave mould [J]. Journal of Manufacturing Processes, 2019(40): 94-104. (SCI)
2. Wang Hongyu*, Wei Zhen, Teng Fei, Zhang Pengchao, Sun Juncai, Ji Shijun. Numerical simulation and experiment research on forming of two-step channel based on rubber pad pressing [J]. The International Journal of Advanced Manufacturing Technology. 2019, 101(5-8), 2175–2189. (SCI)
3. Wang Hongyu*, Zhang Dianhua, Zhao Dewen, Ji Shijun Sun Juncai. Analysis of deformations of rolls in the six-high tandem mill on the basis of anti-symmetry rotation, [J], Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Accepted.DOI: 10.1177/1408. 2019 (SCI)
4. Wang Hongyu*, Ji Shijun, Zhao Dewen, Zhang Dianhua. Analysis and study of dieless drawing process for rod based on radial direction gradient slab method [J]. The International Journal of Advanced Manufacturing Technology. 2018, 98(1–4): 839–847. (SCI)
5. Wang Hongyu*,Li Xu, Sun Jie, Zhang Dianhua, Zhao Dewen, Ji Shijun, Sun Juncai. Analysis of unbonded sandwich rolling defected length of the head based on experiments with aluminum and copper [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2018 (40):460. (SCI)
6. Wang Hongyu*, Sun Jie, Wan Zhenting, Wang Qinglong, Zhao Dewen, Zhang Dianhua. Analysis of eccentric unbonded bimetal rod in ECAP based on different arrangements of soft and hard metals [J], Applied Mathematical Modelling, 2017,4,501-527. (SCI)
7. Wang Hongyu*, Ding Jingguo, Lu Xing, Zhang Dianhua, Zhao Dewen. Analysis of ultra-heavy plate rolling force based on thickness temperature gradient elements and experiment simulations [J], Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(4), 599–615. (SCI )
8. Wang Hongyu*, Wang Zhenhua, Zhang Dianhua, Zhao Dewen. Analysis of snake rolling force and torque with changes of thickness depending on unequal roll radii based on pure aluminum experiments [J], Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(1), 161–174. (SCI)
9. Li Xu,Wang Hongyu*, Liu Yuanming, Zhang Dianhua, Zhao Dewen. Analysis of edge rolling based on continuous symmetric parabola curves [J], Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39,1259–1268. (SCI)
10. Wang Hongyu*, Li Xu, Sun Jie, Wang Zhenhua, Zhao Dewen, Zhang Dianhua. Analysis of sandwich rolling with two different thicknesses outer layers based on slab method [J], International Journal of Mechanical Sciences, 2016,106,194-208. (SCI)
11. Wang Hongyu^?, Hu Yukun, Gao Feng, Zhao Dewen, Zhang Dianhua. Nominal friction coefficient in spread formulas based on lead rolling experiments [J], Transactions of Nonferrous Metals Society of China, 2015,25, 2693?2700. (SCI)
12. Wang Hongyu*, Zhang Dianhua, Zhang Dewen. Analysis of Asymmetrical Rolling of Unbonded Clad Sheet by Slab Method Considering Vertical Shear Stress [J], ISIJ International, 2015, 55(5), 1058–1066.(SCI)
13. Li Xu,Wang Hongyu*, Ding Jingguo, Xu Jiujing, Zhang Dianhua. Analysis and prediction of fishtail during V-H hot rolling process [J], Journal of Central South University,2015, 22, 1184?1190. (SCI)
? 研究领域：
? 辽宁省博士启动基金，《质子交换膜燃料电池金属双极板二阶蛇形流道软模拉深成形变形机理研究》，编号：。
? 国家自然科学基金，青年基金项目，《复杂中空铝合金型材聚氨酯芯等径角挤压的性-形协同调控变形机理》，编号：**。