姓 名 凌意瀚 性 别 男
出生年月 1986年5月 籍贯 池州市青阳县
民 族 汉族 政治面貌 群众
最后学历 博士研究生 最后学位
技术职称 副教授 导师类别 博、硕导
行政职务 无 Email lyhyy@cumt.edu.cn
工作单位 材料学院 邮政编码 221116
通讯地址 中国矿业大学南湖校区
单位电话 **
个人主页


个人简介
凌意瀚，男，1986年5月出生，材料科学与工程学院，副教授，安徽池州人。2008年7月于南京航空航天大学获学士学位，2013年7月于中国科学技术大学获工学博士学位，2013年至2015年在日本东北大学作为JSPS外国人特别研究员（JSPS Fellow）进行研究，2015年9月起任职于中国矿业大学材料科学与工程学院。主要从事无机非金属材料的合成科学，探索应用于洁净能源和环境工程的新材料，着重研究材料的结构和性能的关联性研究，并致力于电化学器件的原位表征技术。研究对象主要为固体氧化物燃料电池及其相关材料，全固态锂离子电池及相关材料，无机膜材料和过程，污染物分离转化及资源化、无机固体废弃物及矿物资源化等。曾参与国家自然科学基金重大项目、面上项目及科技部973计划项目等，现主持中国矿业大学启动基金等项目。目前已在J. Mater. Chem. A, J. Membr. Sci., J. Power Sources, Phys. Chem. Chem. Phys., Int. J. Hydrogen Energy, RSC Adv., Electrochi. Acta等国际期刊上合作发表SCI论文35篇, 其中第一作者15篇，通讯作者4篇，并获得国家授权发明专利多项。Email：lyhyy@cumt.edu.cn

获奖、荣誉称号
2017年德国 洪堡****
2013年日本JSPS Fellow
2013年中科院院长奖
2012年中国科学技术大学“研究生国家奖学金”
2010年中国科学技术大学“东港奖学金”

研究领域
主要从事无机非金属材料的合成科学，探索应用于洁净能源和环境工程的新材料，着重研究材料的结构和性能的关联性研究，并致力于电化学器件的原位表征技术。研究对象主要为固体氧化物燃料电池及其相关材料，全固态锂离子电池及相关材料，无机膜材料和过程，污染物分离转化及资源化、无机固体废弃物及矿物资源化等。

科研项目
中国矿业大学人才引进项目

发表论文

Nakamura T., Ling Y.H., Amezawa K.(2015):The effect of interstitial oxygen formation on the crystal lattice deformation in layered perovskite oxides for electrochemical devices, Journal of Materials Chemistry A, 3:10471-10479
Ling Y.H., Wang F., Budiman R.A., Nakamura T., Amezawa K. (2015):Oxygen nonstoichiometry, the defect equilibrium model and thermodynamic quantities of the Ruddlesden–Popper oxide Sr₃Fe₂O_7-δ, Physical Chemistry Chemical Physics,17:7489-7497
Ling Y.H., Chen L.Y., Lin B., Yu W.L., Isimjan T.T., Zhao L., Liu X.Q.(2015): Synthesis and characterization of Sr_{0. 95}Y_0.05TiO_3-δ-based hydrogen electrode for reversible solid oxide cells, RSC Advances, 5:17000-17006.
Ling Y.H., Wang Z.B., Wang Z.Q., Peng R.R., Lin B., Yu W.L., Isimjan T. T., Lu Y.L.(2015):A robust carbon tolerant anode for solid oxide fuel cells, Science China Materials, 58:204-212
Ling Y., Zhao L., Liu X., Lin B.(2015): Tailoring Electrochemical Property of Layered Perovskite Cathode by Cu-doping for Proton-Conducting IT-SOFCs, Fuel Cell,15:384-389.
Shao Q., Ge W.J., Lu X.Y., Chen Y.H., Ding Y.Z., Lin B.,Ling Y.H.(2015):A promising cathode for proton-conducting intermediate temperature solid oxide fuel cells: Y_0.8Ca _0.2BaCo4O_7+δ,Ceramics International, 41:6687-6692
He B.B., Ding D., Ling Y.H., Xu J.M., Zhao L.,(2015):Efficient modification for enhancing surface activity of Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ oxygen permeation membrane, Journal of Membrane Science,477:7-13.
He B.B., Zhang L., Zhang Y.X., Ding D., Xu J.M., Ling Y.H., Zhao L.(2015): New insight into highly active cathode of proton conducting solid oxide fuel cells by oxygen ionic conductor modification, Journal of Power Source, 287:170-176.
Ling Y.H., Wang F.,Zhao L., Liu X.Q., Lin B.(2014):Comparative study of electrochemical properties of different composite cathode materials associated to stable proton conducting BaZr_0.7Pr_0.1Y_0.2O_3-δelectrolyte, Electrochimica Acta,146:1-7.
Zhao L., Ding D., Zhang L., Gui L.Q., Wang Z.H., Wan Y.H., Wang R.R.,Ling Y.H., He B.B.(2014):The effect of Cr deposition and poisoning on BaZr_0.1Ce_0.7Y_0.2O_3−δproton conducting electrolyte,International Journal of Hydrogen Energy, 39:18379-18384.
He B.B.,Ling Y.H., Xu J.M.,Zhao L., Cheng J.G.(2014):Effect of nickel impregnated hollow fiber anode for micro tubular solid oxide fuel cells, Journal of Power Sources,258:391-394.
He B.B., Ding D.,Ling Y.H.,Zhao L., Cheng J.G.(2014):Fabrication and evaluation of stable micro tubular solid oxide fuel cells with BZCY-BZY bi-layer proton conducting electrolytes, International Journal of Hydrogen Energy, 39:19087-19092
He B.B., Zhang K.,Ling Y.H., Xu J.M.,Zhao L. (2014): A surface modified La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δultrathin membrane for highly efficient oxygen separation, Journal of Membrane Science,464: 55-60.
Lei Z.W., Huang Y., Liu M., Ge W.,Ling Y.H., Peng R.R., Mao X.Y., Chen X.B., Lu Y.L.(2014):Ferroelectric and ferromagnetic properties of Bi_7−xLa_xFe_1.5Co_1.5Ti₃O₂₁ceramics prepared by the hot-press method,Journal of Alloys and Compounds, 600:168-172.
Ling Y.H., Zhang X.Z., Wang Z.B., Wang S.L.,Zhao L., Liu X.Q., Lin B. (2013): Potentiality of cobalt-free perovskite Ba_0.5Sr_0.5Fe_0.9Mo_0.1O_3−δas a single-phase cathode for intermediate-to-low temperature solid oxide fuel cells, International Journal of Hydrogen Energy, 38:14323-14328.
Ling Y.H., Chen J., Wang Z.B., Xia C.R., Peng R.R., Lu Y.L.(2013):New ionic diffusion strategy to fabricate proton-conducting solid oxide fuel cells based on a stable La₂Ce₂O₇ electrolyte, International Journal of Hydrogen Energy, 38:7430-7437.
Sun S.J.,Ling Y.H.,Peng R.R.,Liu M.,Mao X.Y.,Chen X.B.,Knize R.J.,Lu Y.L.(2013): Synthesis of Ni-substituted Bi₇Fe₃Ti₃O₂₁ ceramics and their superior room temperature multiferroic properties,RSC Advances, 3:18567-18572.
Ling Y.H., Yao X.H., Zhang X.Z., Liu X.Q., Lin B.(2012): Development of a novel type of composite cathode material for proton-conducting solid oxide fuel cells, International Journal of Hydrogen Energy, 37:5940-5945.
Zhong W.,Ling Y.H., Rao Y.Y., Peng R.R., Lu Y.L. (2012): Calcium doped Y₃Fe₅O₁₂as a new cathode material for intermediate temperature solid oxide fuel cells,Journal of Power Sources,213:140-144.
Ling Y.H., Yu J., Lin B., Zhang X.Z., Zhao L., Liu X.Q.(2011): A cobalt-free Sm_0.5Sr_0.5Fe_0.8Cu_0.2O_3-δ-Ce_0.8Sm_0.2O_2-δ composite cathode for proton-conducting solid oxide fuel cells,Journal of Power Sources,196:2631–2634.
Dong Y.C., Lin B., Zhou J.E., Zhang X.Z.,Ling Y.H., Liu X.Q., Meng G.Y., Hampshire S.(2011): Corrosion resistance characterization of porous alumina membrane supports,Materials Characterization,62:409-418.
Ling Y.H., Zhao L., Lin B., Dong Y.C., Zhang X.Z., Meng G.Y., Liu X.Q.(2010): Investigation of cobalt-free cathode material Sm_0.5Sr_0.5Fe_0.8Cu_0.2O_3-δfor intermediate temperature solid oxide fuel cell, International Journal of Hydrogen Energy, 35:6905-6910.
Ling Y.H., Zhang X.Z., Wang S.L., Zhao L., Lin B., Liu X.Q.(2010): A cobalt-free SrFe_0.9Sb_0.1O_3-δcathode material for proton-conducting solid oxide fuel cells with stable BaZr_0.1Ce_0.7Y_0.1Yb_0.1O_3-δ electrolyte, Journal of Power Sources,195:7042–7045.
Ling Y.H., Lin B., Zhao L., Zhang X.Z., Yu J., Peng R.R., Meng G.Y., Liu X.Q.(2010): Layered perovskite LaBaCuMO_5+x (M = Fe, Co) cathodes for intermediate-temperature protonic ceramic membrane fuel cells, Journal of Alloys and Compounds, 493:252–255.
Zhao L., He B.B.,Ling Y.H., Xun Z.Q., Peng R.R., Meng G.Y., Liu X.Q.(2010):Cobalt-free oxide Ba_0.5Sr_0.5Fe_0.8Cu_0.2O_3−δfor proton-conducting solid oxide fuel cell cathode,International Journal of Hydrogen Energy, 35:3769-3774.
Lin B., Chen J.F.,Ling Y.H., Zhang X.Z., Jiang Y.Z.,Zhao L., Liu X.Q., Meng G.Y.(2010): Low-temperature solid oxide fuel cells with novel La_0.6Sr_0.4Co_0.8Cu_0.2O_3−δ perovskite cathode and functional graded anode, Journal of Power Sources,195:1624-1629.
Zhang X.Z., Lin B.,Ling Y.H., Dong Y.C., Meng G.Y., Liu X.Q.(2010):An anode-supported hollow fiber solid oxide fuel cell with (Pr_0.5Nd_0.5)_0.7Sr_0.3MnO_3−δ–YSZ composite cathode, Journal of Alloys and Compounds, 497:386-389.
Zhang X.Z., Lin B.,Ling Y.H., Dong Y.C., Meng G.Y., Liu X.Q.(2010):An anode-supported micro-tubular solid oxide fuel cell with redox stable composite cathode, International Journal of Hydrogen Energy, 35:8654-8662.
Dong Y.C., Hampshire S., Lin B.,Ling Y.H., Zhang X.Z.(2010): High sintering activity Cu–Gd co-doped CeO₂electrolyte for solid oxide fuel cells, Journal of Power Sources,195:6510-6615.
Zhang X.Z., Lin B.,Ling Y.H., Dong Y.C., Fang D.R., Meng G.Y., Liu X.Q.(2010):Highly permeable porous YSZ hollow fiber membrane prepared using ethanol as external coagulant, Journal of Alloys and Compounds, 494:66-371.
Zhao L., He B.B., Lin B., Ding H.P., Wang S.L., Ling Y.H., Peng R.R., Meng G.Y., Liu X.Q.(2009):High performance of proton-conducting solid oxide fuel cell with a layered PrBaCo₂O_5+δcathode, Journal of Power Sources,194:835-837.