姓名：
陈浩

性别：
男

出生年月：
1976年5月

学历：
博士研究生

职务：
江苏师范大学技术转移中心副主任

职称：
教授

Email：
Chenhao@jsnu.edu.cn

联系电话：


专业与主要研究方向：

1.固体激光器、光纤激光器及其在医学与工业领域的应用装备研究；
2.白光LED/激光照明技术及其产业化应用研究

教授课程：

1.光纤通信原理
2.光子学基础

研究生培养基础要求：

欢迎具有光学、光电子学及无机材料学知识基础，积极、热情、富有团队协作精神的同学。

个人教育简历：

1994.08-1998.06江苏师范大学本科生
2001.09-2004.06华东师范大学硕士生
2010.09-2013.06复旦大学博士生

个人工作简历：

1998.08-2014.01江苏师范大学历任助教、实验师、讲师、副教授、教授
2014.01-2016.12江苏师范大学江苏省先进激光材料与器件重点实验室副主任

2017.01-至今江苏师范大学技术转移中心副主任
其中，2016.05-2016.10台湾交通大学访问

近期主要主持的项目：

1.国家自然科学基金面上项目：Ho:YAG透明陶瓷中“晶界”对激光振荡的调控机理研究(**)；2012.01-2016.12；项目经费：86万；项目负责人。

2.国家自然科学基金面上项目：钬激光器双波长同带泵浦及双增益光谱平坦技术研究(**)；2018.01-2018.12；项目经费：16万；项目负责人。

3.徐州市工业重点研发项目：远程激发微晶白光LED关键技术及产业化研究（KC16GZ014）；2016.10-2018.09；项目经费：50万；项目负责人。
4.其他在研项目2项，项目经费110万。

代表性论文：

1.Zhang Le, Zhou Tianyuan, Selim Farida A., Chen Hao. Single CaO accelerated densification and microstructure control of highly transparent YAG ceramic [J]. Journal of the American Ceramic Society, 2018, 101(2): 703-712.
2.Zhang Le, Jiang Zhigang, Yao Qing, Wang Zhongying, Zhang Yikun, Wei Shuai, Zhou Tianyuan, Ben Yue, Sun Rong, Chen Hao. Stirring speed assisted homogenization of precipitation reaction for enhanced optical performance of Y2O3 transparent ceramics [J]. Ceramics International, 2018.
3.Yao Qing, Zhang Le, Jiang Zhigang, Huang Guocan, Zhou Tianyuan, Ben Yue, Wei Shuai, Sun Rong, Chen Hao, Wang Yun. Isobam assisted slurry optimization and gelcasting of transparent YAG ceramics [J]. Ceramics International, 2018, 44(2): 1699-1704.
4.张乐,周天元,陈浩,杨浩,张其土,宋波,汪正平. Nd:YAG激光透明陶瓷的研究进展[J].材料导报, 2017, 31(13): 41-50.
5.王骋,魏帅,甄方正,周天元,杨浩,张乐,陈浩.化学沉淀法制备YAG透明陶瓷粉体研究进展[J].材料导报, 2017, 31(Z2): 77-83.
6.Zhou Tianyuan, Zhang Le, Wei Shuai, Wang Lixi, Yang Hao, Fu Zhenxiao, Chen Hao, Selim Farida A., Zhang Qitu. MgO assisted densification of highly transparent YAG ceramics and their microstructural evolution [J]. Journal of the European Ceramic Society, 2017, 38(2): 687-693.
7.Zhou Tianyuan, Zhang Le, Selim Farida A, Yang Hao, Zhang Qitu, Sun Rong, Wong Chingping, Chen Hao. Annealing induced discoloration of transparent YAG ceramics using divalent additives in solid-state reaction sintering [J]. Journal of the European Ceramic Society, 2017, 37: 4123-4128.
8.Zhou Tianyuan, Zhang Le, Li Zheng, Wei Shuai, Wu Jiadong, Wang Lixi, Yang Hao, Fu Zhenxiao, Chen Hao, Wong Chingping, Zhang Qitu. Enhanced conversion efficiency of Cr4+ ion in Cr: YAG transparent ceramic by optimizing the annealing process and doping concentration [J]. Journal of Alloys and Compounds, 2017, 703: 34-39.
9.Zhou Tianyuan, Zhang Le, Li Zheng, Wei Shuai, Wu Jiadong, Wang Lixi, Yang Hao, Fu Zhenxiao, Chen Hao, Tang Dingyuan, Wong Chingping, Zhang Qitu. Toward vacuum sintering of YAG transparent ceramic using divalent dopant as sintering aids: Investigation of microstructural evolution and optical property [J]. Ceramics International, 2017, 43(3): 3140-3146.
10.Zhang Le, Li Zheng, Zhen Fangzheng, Wang Lixi, Zhang Qitu, Sun Rong, Selim Farida A., Wong Chingping, Chen Hao. High sinterability nano-Y2O3 powders prepared via decomposition of hydroxyl-carbonate precursors for transparent ceramics [J]. Journal of Materials Science, 2017, 52(14): 8556-8567.
11.Zhang Le, Ben Yue, Wu Jiadong, Yang Hao, Wong Chingping, Zhang Qitu, Chen Hao. Alumina assisted grain refinement and physical performance enhancement of yttria transparent ceramics by two-step sintering [J]. Materials Science and Engineering: A, 2017, 684: 466–469.
12.Zhang Le, Ben Yue, Chen Hao, Tang Dingyuan, Fu Xianzhu, Sun Rong, Song Bo, Wong Chingping. Low temperature-sintering and microstructure of highly transparent yttria ceramics [J]. Journal of Alloys and Compounds, 2017, 695: 2580-2586.
13.Wu Jiadong, Zhang Le, Ben Yue, Chen Hao, Fu Xianzhu, Wong Chingping. Improved full-color emission and switched luminescence in single Ca3(PO4)2: Dy3+, Eu3+ phosphors for white LEDs [J]. Journal of Alloys and Compounds, 2017, 697: 215-221.
14.Wu Jiadong, Zhang Chunxiang, Liu Jun, Zhao Ting, Yao Weichao, Tang Pinghua, Zhang Le, Chen Hao. Over 19?W Single-Mode 1545?nm Er,Yb Codoped All-Fiber Laser, [J]. Advances in Condensed Matter Physics, 2017, 2017(Article ID **): 1-5.
15.Wei Shuai, Zhang Le, Yang Hao, Zhou Tianyuan, Wong Chingping, Zhang Qitu, Chen Hao. Preliminary study of 3D ball-milled powder processing and SPS-accelerated densification of ZnSe ceramics [J]. Optical Materials Express, 2017, 7(4): 1131-1140.
16.Wei Shuai, Zhang Le, Ben Yue, Zhou Tianyuan, Li Zheng, Yang Hao, Selim Farida A., Wong Chingping, Chen Hao. High dispersibility of α-Al2O3 powders from coprecipitation method by step-by-step horizontal ball-milling [J]. Journal of Materials Science: Materials in Electronics, 2017, 28(21): 16254-16261.
17.Jiang Zhigang, Zhang Le, Yao Qing, Wei Shuai, Zhou Tianyuan, Ben Yue, Sun Rong, Huang Guocan, Chen Hao, Wang Yun. Agitator dependent homogeneity enhancement of co-precipitation reaction for improving the dispersibility of precursors and Y2O3 powders [J]. Ceramics International, 2017, 43(18): 16121-16127.
18.Ben Yue, Zhang Le, Wei Shuai, Zhou Tianyuan, Li Zheng, Yang Hao, Wong Chingping, Chen Hao. Improved forming performance of β-TCP powders by doping silica for 3D ceramic printing [J]. Journal of Materials Science: Materials in Electronics, 2017, 28(7): 5391-5397.
19.Ben Yue, Zhang Le, Wei Shuai, Zhou Tianyuan, Li Zheng, Yang Hao, Wang Yun, Selim Farida A., Wong Chingping, Chen Hao. PVB modified spherical granules of β-TCP by spray drying for 3D ceramic printing [J]. Journal of Alloys and Compounds, 2017, 721: 312-319..
20.L. Wang, H. Huang, D. Shen, J. Zhang, H. Chen, and D. Tang, “Diode-pumped high power 2.7μm Er:Y2O3 ceramic laser at room temperature,” Opt. Mater. (Amst)., pp. 12–15, 2016.
21.W. Yao, F. Wu, Y. Zhao, H. Chen, X. Xu, and D. Shen, “Highly efficient Tm:CaYAlO4 laser in-band pumped by a Raman fiber laser at 1.7 μm,” Appl. Opt., vol. 55, no. 14, pp. 3730–3733, 2016.
22.J. Zhang, Q. Liu, D. Shen, J. Zhang, D. Tang, and H. Chen, “Short pulse-width gain-switched Ho:YAG ceramic laser at～2.09 μm,” Appl. Opt., vol. 55, no. 8, p. 1890, 2016.
23.J. Zhang, D. Shen, X. Xu, and H. Chen, “Widely tunable, narrow line-width Ho?: CaYAlO4 laser with a volume Bragg grating,” vol. 6, no. 6, pp. 1768–1773, 2016.
24.J. Zhang, D. Shen, J. Zhang, D. Tang, and H. Chen, “Gain-switched Ho:YAG ceramic laser with an acousto-optic modulator,” Opt. Eng., vol. 55, no. 4, p. 46115, 2016.
25.W. Yao, B. Chen, J. Zhang, Y. Zhao, H. Chen, and D. Shen, “High-average-power operation of a pulsed Raman fiber amplifier at 1686 nm,” Opt. Express, vol. 23, no. 9, p. 11007, 2015.
26.L. Wang, H. Huang, D. Shen, J. Zhang, H. Chen, Y. Wang, X. Liu, and D. Tang, “Room temperature continuous-wave laser performance of LD pumped Er:Lu2O3 and Er:Y2O3 ceramic at 27 μm,” Opt. Express, vol. 22, no. 16, p. 19495, 2014.
27.T. Zhao, Y. Wang, H. Chen, and D. Shen, “Graphene passively Q-switched Ho:YAG ceramic laser,” Appl. Phys. B Lasers Opt., vol. 116, no. 4, pp. 947–950, 2014.
28.T. Zhao, Y. Wang, D. Shen, J. Zhang, D. Tang, and H. Chen, “Continuous-wave and Q-switched operation of a resonantly pumped polycrystalline ceramic Ho:LuAG laser,” Opt. Express, vol. 22, no. 16, p. 19014, 2014.
29.X. Qin, H. Yang, D. Shen, H. Chen, G. Zhou, D. Luo, J. Zhang, S. Wang, J. Ma, and D. Tang, “Fabrication and optical properties of highly transparent Er:YAG polycrystalline ceramics for eye-safe solid-state lasers,” Int. J. Appl. Ceram. Technol., vol. 10, no. 1, pp. 123–128, 2013.
30.Y. Wang, H. Chen, D. Shen, J. Zhang, and D. Tang, “High power continuous-wave and graphene Q-switched operation of Er:YAG ceramic lasers at ~1.6?μm,” J. Opt. Soc. Korea, vol. 17, no. 1, pp. 5–9, 2013.
31.H. Yang, J. Zhang, D. Luo, H. Lin, H. Chen, D. Shen, and D. Tang, “Optical properties and laser performance of Ho:LuAG ceramics,” Phys. Status Solidi, vol. 10, no. 6, pp. 903–906, 2013.
32.H. Chen, D. Y. Shen, X. D. Xu, T. Zhao, X. F. Yang, D. H. Zhou, and J. Xu, “High-power 2.1?μm Ho: Lu1.5Y1.5Al5O12 laser in-band pumped by a Tm fiber laser,” Laser Phys. Lett., vol. 9, no. 1, pp. 26–29, 2012.
33.H. Yang, J. Zhang, X. Qin, D. Luo, J. Ma, D. Tang, H. Chen, D. Shen, and Q. Zhang, “Polycrystalline Ho:YAG transparent ceramics for eye-safe solid state laser applications,” J. Am. Ceram. Soc., vol. 95, no. 1, pp. 52–55, 2012.
34.H. Chen, D. Shen, J. Zhang, H. Yang, D. Tang, T. Zhao, and X. Yang, “In-band pumped highly efficient Ho:YAG ceramic laser with 21 W output power at 2097 nm.,” Opt. Lett., vol. 36, no. 9, pp. 1575–7, May 2011.
35.D. Shen, H. Chen, X. Qin, J. Zhang, D. Tang, X. Yang, and T. Zhao, “Polycrystalline ceramic Er:YAG laser in-band pumped by a high-power Er,Yb fiber laser at 1532nm,” Appl. Phys. Express, vol. 4, no. 5, 2011.
36.F. Wang, D. Shen, H. Chen, D. Fan, and Q. Lu, “Modeling and optimization of stable gain-switched Tm-doped fiber lasers,” Opt. Rev., vol. 18, no. 4, pp. 360–364, 2011.
37.Y. Wang, D. Shen, H. Chen, J. Zhang, X. Qin, D. Tang, X. Yang, and T. Zhao, “Highly efficient Tm:YAG ceramic laser resonantly pumped at 1617 nm.,” Opt. Lett., vol. 36, no. 23, pp. 4485–7, 2011.
38.D. Shen, H. Chen, and F. Wang, “Wavelength control and spectral narrowing of high power fiber lasers using volume Bragg gratings,” 9th Int. Conf. Opt. Commun. Networks (ICOCN2010)Nanjing, China, 24-27, October, 2010, pp. 318–320, 2010.
39.E. Wu, H. Chen, Z. Sun, and H. Zeng, “A novel broadband saturable absorber in the near infrared spectral region with cobalt-doped tellurite glasses,” vol. 341, no. 1995, p. 2600, 2006.
40.H. Chen, E. Wu, and H. Zeng, “Comparison between a-cut and off-axially cut Nd:YVO4 lasers passively Q-switched with a Cr4+:YAG crystal,” Opt. Commun., vol. 230, no. 1–3, pp. 175–180, 2004.
41.E. Wu, H. Chen, Z. Sun, and H. Zeng, “Broadband saturable absorber with cobalt-doped tellurite glasses.,” Opt. Lett., vol. 28, no. 18, pp. 1692–1694, 2003.


专利：

1.波长连续可调谐激光装置 CN4 2014.01.15
2.高功率窄线宽可调谐激光器 CN7 2014.01.15
3.一种使用二次曲面镜的高功率窄线宽可调谐激光器 CN8 2014.01.15
4.一种基于激光介质中心零增益结构的涡旋激光器 CN6 2015.09.17
5.用于提升~1.5μm激光效率的Er,Yb共掺光纤 CN7 2015.09.17
6.一种氧化钇基透明陶瓷的制备方法 CN4 2015.12.23
7.Y2O3基透明陶瓷粉体的喷射共沉淀制备方法 CN5 2015.12.25
8.一种He-Ne精校准方法 CN3 2016.04.29
9.一种透明陶瓷荧光管内壁封装蓝光芯片的白光LED光源CN0 2016.03.07
10.一种磁光氧化铽透明陶瓷的制备方法 CN0 2016.02.25
11.一种基于透明陶瓷荧光管的高功率白光LED光源 CN7 2016.03.07
12.一种喷枪喷涂制备YAG基复合结构透明陶瓷的方法CN6 2016.04.08
13.一种基于透明陶瓷荧光体的直管型白光LED光源 CN1 2016.03.07
14.成像用双波段发光Nd:Y2O3纳米荧光粉体及其制备方法CN1 2016.09.14
15.一种基于远程激发技术的大功率白光LED路灯光源CN7 2016.10.25
16.一种基于荧光透明陶瓷材料的LED远程发光器件 CN8 2016.10.25
17.一种白光LED用复合钙钛矿红色荧光粉及其制备方法 CN2 2016.12.09
18.一种白光LED用三方双钙钛矿红色荧光粉及其制备方法CN0 2016.12.09
19.一种超薄透明陶瓷流延素坯的烧结防变形方法 CN8 2016.12.09
20.喷射共沉淀制备高分散性纳米氧化物粉体的连续方法 CN0 2017.02.22
21.一种高导热低膨胀W Cu封装材料的制备方法 CN5 2017.04.10
22.一种快速低耗高效制备YAG粉体的方法 CN4 2017.04.25
23.一种提高化学沉淀法制备氧化物粉体分散性的方法 CN4 2017.04.25
24.一种Li+共掺提高硅酸盐荧光粉长余辉特性的方法 CN6 2017.04.10
25.一种Mg助剂体系YAG基透明陶瓷的制备方法CN4 2017.06.08
26.一种氧化钇纳米粉体及纳米结构的制备方法 CN1 2017.01.24
27.一种Ca助剂体系YAG基透明陶瓷的制备方法 CN3 2017.06.08
28.一种非硅助剂下真空烧结YAG基透明陶瓷的制备方法 CN7 2017.09.08
29.一种用四斜叶搅拌器共沉淀制备氧化钇纳米晶粉体的方法 CN4 2017.08.22

获奖情况：

1.2012年，徐州市科技进步奖二等奖（排名第2）
2.2012年，淮海科技进步奖二等奖（排名第2）
3.2014年，中国精品科技期刊顶尖学术论文领跑者5000（排名第1）
4.2015年，江苏省科学技术奖（排名第2）
5.2015年，江苏省研究生培养模式改革成果奖（排名第2）
6.2015年，校先进工作者
7.2015年，校2013-2015年岗位聘期考核优秀
8.2017年，“挑战杯”全国竞赛江苏省选拔赛三等奖指导教师