姓 名
陈玉仑
性别
男


职 称
副教授
系别
机械工程系

学 位
博士
电话
**

E-mail
Chenyulun@njau.edu.cn

单位地址
南京市浦口区点将台路40号
邮编
210031

研究领域
1.现代机械设计理论及方法
2.农产品加工技术研究及装备开发

承担项目
1.省政策引导类计划（苏北科技专项）——基于模块化技术的免耕直播秸秆覆盖还田机研制，19万元，2018.12—2020.11；
2.国家科技支撑计划子课题——猪胴体雾化喷淋增湿装备研制，项目编号：2014BAD19B01-01，11.8万，2014 7—2016 12；
3.省政策引导类计划（苏北科技专项）——智能模块化1JH系列稻麦秸秆切碎深埋还田机研制，项目编号：BN**，12万，2015 7—2018 6；
4.省政策引导类计划（产学研联合创新资金）——设施农业用旋耕起垄施肥精量播种机研制，项目编号：BY**,15万，2013 9-2015 8；
5.中央高校科研业务费——联合收割、免耕播种、秸秆集沟还田机的开发及配套农艺研究，项目编号：KYZ201221，40万，2012 8—2014 7；
6.企业横向课题——秸秆切碎深埋还田机关键技术创新研究，30万，2016.12—2018.12；
7.企业横向课题——猪胴体减菌用乳酸喷淋装置及其控制系统设计，5万，2016 12—2017 6；
8. 连云港市现代农业项目——设施农业用轻简型旋耕施肥精量播种机设计，项目编号：CN1603，8万，2016 12—2018 11；
9. 科研启动基金——稻麦收获、秸秆集沟还田型联合作业机的改进，项目编号：RCQD11-04，5万，2012 1—2013 12；

学术成果

主要论文：
1.Weight loss prediction model for pig carcass based on a genetic algorithm back-propagation neural network [J] American Society of Agricultural and Biological Engineers2020Vol. 63(4): 1071-1077.(SCI)
2.陈玉仑，孙晨阳，卢中山，范雷明，李毅念，李春保.基于可编程控制器的猪胴体喷淋冷却作业控制系统设计[J].农业工程学报，2018，34（3）：273-278.(EI)
3.卢中山，张楠，杜世伟，李毅念，李春保，陈玉仑*.基于模糊理论的猪胴体喷淋作业参数优选[J].南京农业大学学报，2017，40(4)：750–757.
4.张楠，杜世伟，陈玉仑，李春保，李毅念，周光宏*.猪胴体预冷过程中雾化增湿与喷淋对干耗的影响差异性研究[J].食品工业科技，2017，38(3)：322–325.(EI)
5.张楠，卢中山，陈玉仑，孙晨阳，李春保，周光宏*.分段喷淋冷却降低宰后猪胴体预冷损耗保持色泽[J].农业工程学报，2017，33（12）：301-307.(EI)
6.张楠，庄昕波，黄子信，陈玉仑，李春保，周光宏*.低场核磁共振技术研究猪肉冷却过程中水分迁移规律[J].食品科学，2017，38（11）：103-109.
7.陈玉仑，赵三琴，邱威，顾家冰，丁为民，李毅念*，夏立民.稻谷整粒与粉碎水分测试方法的对比分析[J].中国粮油学报，2015，30（6）：130－133.(EI)
8.Yulun Chen*，Wei Qiu，Weimin Ding，Yinian Li，Yutao Liu.Design and Test on Sowing Device of the Multi-functional Machine for Rice-wheat Cyclic Planting[J].Advance Journal of Food Science and Technology, 2015,7(6): 428-434. (EI)
9. Yulun Chen*，Wei Qiu，Weimin Ding，Yinian Li，Yutao Liu.Improvement and test on ditcher chain transmission system of the machine for rice-wheat cyclic planting[J]. Applied Mechanics and Materials, 2014，644-650: 853 -857.(EI)
10. Yulun Chen*，Wei Qiu，Weimin Ding，Yinian Li，Yutao Liu.Parameters Optimization of Ditcher Chain Transmission System of Muti-Functional Machine[J]. Advanced Materials Research, 2014, 1030-1032: 1224-1228.(EI)
11.陈玉仑，丁为民*，方志超，何春霞.全喂入式联合收割机碎草脱粒装置的改进设计[J].农业工程学报，2013，29（24）：11-16.(EI)
12.陈玉仑，丁为民*，方志超，何春霞.联合收获免耕直播机开沟分土装置抛土性能研究[J].南京农业大学学报，2013，36（6）：135-140.
13.陈玉仑，丁为民*，杨宏图，丁启朔，汪小旵.墒沟集草型稻麦联合收获机设计与试验[J].农业机械学报，2012，43(S)：73-78.(EI)
14.陈玉仑，丁为民*，姚立健，丁启朔，杨宏图，汪小旵.稻麦联合收割开沟埋草多功能一体机开沟功耗研究[J].南京农业大学学报，2010，32(2)：101–104.
15.陈玉仑，丁为民*，汪小旵，杨宏图.稻麦联合收获开沟埋草多功能一体机设计[J].农业机械学报，2009，40(8)：62-66.(EI)
16.陈玉仑，丁为民*.圆盘开沟机刀盘升降装置参数优化的Matlab实现[J].甘肃农
业大学学报，2008，43(2)：139-142.
17.杨宏图，丁为民*，陈玉仑，丁启朔，汪小旵,蒯杰，王建军..稻麦联合收割开 沟填草一体机的改进与设计[J].西北农林科技大学学报（自然科学版），2010，38（9）：161-166.
18.姚立健，丁为民*，陈玉仑，赵三琴.茄子收获机器人机械臂避障路径规划[J].农
业机械学报，2008，39(11)：94-98.
1
授权专利：
1.一种全喂入联合收割机脱粒装置，ZL200**（发明，第一发明人）；
2.一种种肥共用条穴播通用排量可调种肥排施装置，ZL37（发明，第一发明人）；
3.一种稻麦收获、秸秆及根茬肥料化还田处理联合作业机，ZL20**（发明，第二发明人）；
4.稻麦联合收割开沟埋草喷施多功能一体机[P],79.9（发明，第二发明人）；
5.一种家畜屠宰后喷淋减菌用倍程机构[P],7.2（实用新型，第一发明人）；
6.一种猪胴体表面湿度检测装置[P],9.1（实用新型，第一发明人）；7.一种种肥共用条穴播通用排量可调种肥排施器[P],4.0（实用新型，第一发明人）；
8．设施农业用旋耕起垄施肥精量播种机[P]，ZL6.4（实用新型，第一发明人）；
9.一种双侧横向抛土开沟装置[P]，ZL9.5（实用新型，第一发明人）；
10.一种免耕直播用开沟器[P]，ZL3.4（实用新型，第一发明人）；
11.一种横向抛土开沟装置[P]，ZL4.2（实用新型，第一发明人）；
12.一种联合收获免耕直播机[P],5.9（实用新型，第一发明人）；
13.一种全喂入联合收获机输送槽[P],9.4（实用新型，第一发明人）；
14.一种全喂入联合收获机脱粒装置[P],5.9（实用新型，第一发明人）；15.一种往复切割装置[P],5.6（实用新型，第一发明人）；
16．猪胴体预冷库雾化喷淋控制软件，2016SR104562（软件著作权，第一发明人）。

Name
Chen Yulun
Gender
Male

Title
Vice professor
Department
Department of Mechanical Engineering

Degree
Ph. D
Telephone
**

E-mail
chenyulun@njau.edu.cn

Unit address
Dianjiangtai Road 40, Pukou District, Nanjing City, Jiangsu Province, PRC
Post code
210031

Research field
1. Modern design theory and method for machinery
2. Cold storage technology research and equipment design for agricultural products

Research projects
1.Project of policy guidance (Science and technology special project for northern county or city of Jiangsu Province)—Development of no-tillage direct-seeding straw- mulch returning machine based on modular technology. Project Number: LYG-SZ201812, 2018 12-2020 11.
2.Sub-project of National Sci-Tech Support Plan—Design of the equipment of spray chilling for the pig carcass. Project Number: 2014BAD19B01-01, 2014 7-2016 12.
3. Project of policy guidance (Science and technology special project for northern county or city of Jiangsu Province—Development of the 1JHseries machine with straw chopping and deep burying function for rice and wheat by means of intelligent and modular method.Project Number:BN**, 2015 7-2018 6.
4.Project of policy guidance (Cooperative Innovation Funds for Production,Teaching and Research of Jiangsu Province)—Development of the machine with rotary tillage, ridging fertilization and precise seeding function for facilities agriculture. Project Number: BY**, 2013 9-2015 8.
5.Fundamental Research Funds for the Central Universities—Development of the machine with combine harvesting, direct seeding and stalk-disposing function as well as its agronomic techniques. Project Number: KYZ201221, 2012 8-2014 7.

Academic achievements

Published academic papers：
1.Weight loss prediction model for pig carcass based on a genetic algorithm back-propagation neural network [J] American Society of Agricultural and Biological Engineers2020Vol. 63(4): 1071-1077.
2.Chen Yulun, Sun Chenyang, Lu Zhongshan, Fan Leiming, Li Yinian, Li Chunbao. Design of control system for spray chilling operation of pig carcass based on PLC[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2018, 34(3): 273－278.(In Chinese with English abstract)
3.LU Zhongshan, ZHANG Nan, DU Shiwei, LI Yinian, CHEN Yulun*, Fuzzy optimization of spray chilling parameters of pig carcass[J].Journal of Nanjing Agricultural University,2017,40(4): 750-757.(In Chinese with English abstract)
4.ZHANG Nan,DU Shi-wei,CHEN Yu-lun,LI Chun-bao,LI Yi-nian,ZHOU Guang-hong*. Difference of effects of environmental humidifier and spray－chilling on weight－loss of pig carcasses in cooling process[J]. Science and Technology of Food Industry, 2017, 38(3): 322 -325.(In Chinese with English abstract)
5.Zhang Nan, Lu Zhongshan, Chen Yulun, Sun Chenyang, Li Chunbao, Zhou Guanghong. Spray chilling with different frequencyperiod for reducing weight loss and improving surface color of pig carcass[J]. Transactions of the Chinese Society of AgriculturalEngineering (Transactions of the CSAE), 2017, 33(12): 301－307. (in Chinese with English abstract)
6.ZHANG Nan, ZHUANG Xinbo, HUANG Zixin, et al. Change in water mobility in pork during postmortem chillinganalyzed by low-field nuclear magnetic resonance[J].Food Science, 2017, 38(11): 103-109. (in Chinese with Englishabstract)
7.Chen Yulun, Zhao Sanqin, Qiu Wei, Gu Jiabing, Ding Weimin , Li Yinian, Xia Limin.Comparison Analysis on Testing Methods of Rice Moisture Content by Using Whole and Ground Grain[J].Journal of the Chinese Cereals and Oils Association,2015, 30(6): 130-133. (in Chinese with Englishabstract)
8.Yulun Chen*, Wei Qiu, Weimin Ding, Yinian Li, Yutao Liu. Design and Test on Sowing Device of the Multi-functional Machine for Rice-wheat Cyclic Planting[J]. Advance Journal of Food Science and Technology, 2015, 7(6): 428-434.
9. Yulun Chen*, Wei Qiu, Weimin Ding, Yinian Li, Yutao Liu.Improvement and test on ditcher chain transmission system of the machine for rice-wheat cyclic planting[J]. Applied Mechanics and Materials, 2014, 644-650: 853 -857.
10.Yulun Chen*, Wei Qiu, Weimin Ding, Yinian Li, Yutao Liu.Parameters Optimization of Ditcher Chain Transmission System of Muti-Functional Machine[J]. Advanced Materials Research, 2014, 1030-1032: 1224-1228.
11. Chen Yulun, Ding Weiming*,Fang Zhichao, He Chunxia. Improved design of straw-cuttingtype threshing mechanism of full-feeding combine harvester[J].Transactions of the Chinese Society of Agricultural Engineering, 2013, 29(24): 11-16.(In Chinese with English abstract)
12.Chen Yulun, Ding Weiming*,Fang Zhichao, He Chunxia.Soil dispersing performance research of ditcher and reflector of machine with combinative harvesting and no-till planting[J].Journal of Nanjing Agricultural University,2013, 36(6): 135-140.(In Chinese with English abstract)
13.Chen Yulun, Ding Weiming*,Yang Hongtu, Ding Qishuo, Wang Xiaochan. Design and experiment of combine harvester with function of stalk discharging ditch[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(S): 73-78.(In Chinese with English abstract)
14.Chen Yulun, Ding Weiming*,Yao Lijian, Ding Qishuo, Yang Hongtu, Wang Xiaochan.Research on power consumption of ditcher device of harvest ditch and stalk disposing machine[J].Journal of Nanjing Agricultural University,2010,32(2): 101–104.(In Chinese with English abstract)
15.Chen Yulun, Ding Weiming*,Wang Xiaocha, Yang Hongtu.Design of harvest ditch and stalk-disposing machine[J].Transactions of the Chinese Society for Agricultural Machinery,2009, 40(8): 62-66.(In Chinese with English abstract)
16. Chen Yulun, Ding Weiming*. Parameter optimization for elevating device of disc ditcher by means of Matlab[J].Journal of Gansu Agricultural University,2008, 43(2): 139-142.(In Chinese with English abstract)
17.Yang Hongtu, Ding Weiming*,Chen Yulun, Ding Qishuo, Wang Xiaochan, Kuai Jie, Wang Jianjun.Improved design of rice and wheat combined harvester with ditching and grass-filling[J]. Journal of North west A & F University( Nat. Sci. Ed. ), 2010, 38(9): 161-166.(In Chinese with English abstract)
18.Yao Lijian,Ding Weiming*,Chen Yulun, Zhao Sanqin. Obstacle Avoidance Path Planning of Eggplant Harvesting Robot Manipulator[J].Transactions of the Chinese Society for Agricultural Machinery,2008, 39(11): 94-98.(In Chinese with English abstract)
Authorized patents：
1.A threshing device for full-feeding combine harvester,ZL200**(invention patent, the first inventor);
2.An adjustable device with dibbling or drilling function for drill or fertilization,ZL37(invention patent，the first inventor);
3.A multi-functional machine with harvesting and straw and stubble disposing into fertilizer function for rice and wheat, ZL20** (invention patent, the second inventor);
4. A multi-functional machine with harvesting ditching spraying and stalk-disposing function[P], 79.9 (invention patent，the second inventor);
5. A harvester with no-till planting function [P], 5.9 (utility-model patent, the first inventor);
6. A reciprocating cutting device for combine harvester [P], 5.6 (utility-model patent, the first inventor);
7. A trough conveyor for full-feeding combine harvester [P], 9.4 (utility-model patent, the first inventor);
8. A threshing device for full-feeding combine harvester[P], 5.9 (utility-model patent, the first inventor);
9. An adjustable device with dibbling or drilling function for drill or fertilization[P],4.0 (utility-model patent, the first inventor);
10. A ditching device with function of dispersing soil lateral [P], ZL4.2 (utility-model patent, the first inventor);
11. An opener for no-tillage direct seeding[P], ZL3.4 (utility-model patent, the first inventor);
12. A ditching device with function of dispersing soil to both sides[P], ZL9.5 (utility-model patent, the first inventor);
13. Machine with rotary tillage ridging fertilization and precise seeding function for facilities agriculture[P]，ZL6.4 (utility-model patent, the first inventor);
14. Software used for controlling the spray chilling process of pig carcass，2016SR104562 (Software copyright，the first inventor).