姓 名
郑恩来
性别
男


职 称
副教授
系别
机械设计与制造系

学 位
博士/硕导
电话
**

E-mail
enlaizheng@njau.edu.cn

单位地址
南京市浦口区点将台路40号
邮编
210031

研究领域
复杂机电系统动力学与智能控制，农业装备智能化设计技术

社会兼职
中国振动工程学会机械动力学委员会会员，中国振动工程学会转子动力学分委会理事，中国农业机械青年工作委员会委员

承担项目
主持的项目：
1.中央高校基本科研业务费重大专项：高档锻压机床智能化专用数控系统开发（编号：KYTZ201603），2016/01-2019/12.
2.国家自然科学基金：高速冲压工况下多连杆超精密压力机动态精度影响机理与误差补偿研究（编号：**），2015/01-2017/12.
3.江苏省自然科学基金：多连杆高速超精密压力机动态精度分析与误差补偿研究（编号：BK**），2014/07-2017/06.
4.中央高校基本科研业务费项目：高速冲压工况下多连杆超精密压力机动态精度影响机理与误差补偿研究（编号：KJQN201558），2015/01-2017/12.
5.中国博士后基金：高速犁耕下拖拉机/农具系统操纵稳定性影响机理研究（编号：2016M591855），2015/01-2017/12.
6.江苏省博士后基金：刚度与阻尼可调式拖拉机驾驶室半主动座椅悬架系统控制理论与试验研究（编号：KJQN201558），2014/03-2016/03.
7.南京农业大学工学院优秀青年人才科技基金：多连杆高速精密伺服压力机振动特性分析与伺服控制策略研究（编号：YQ201606），2016/01-2018/12.

学术成果
部分代表论文：
1.郑恩来,储磊,蒋书运,朱松青,康敏,史金飞.含润滑间隙和曲轴转子-轴承结构的平面柔性多连杆机构多体动力学建模与动态误差分析[J].机械工程学报,2020, 56(3): 106-120. (EI)
2.Enlai Zheng*, Tianyu Wang, Jun Guo, Yue Zhu, Xiangze Lin, Yongjian Wang, Min Kang. Dynamic modeling and error analysis of planar flexible multilink mechanism with clearance and spindle-bearing structure[J].Mechanism and Machine Theory, 2019, 131: 234-260. (SCI, IF: 2.796)
3.Enlai Zheng*, Xinyu Zhong, Rui Zhu, Jinlin Xue, Song Cui, Huisong Gao, Xiangze Lin. Investigation into the vibration characteristics of agricultural wheeled tractor-implement system with hydro-pneumatic suspension on the front axle[J].Biosystems Engineering, 2019, 186: 14-33. (SCI, IF: 2.983)
4.Enlai Zheng*, Yuanzhao Yang, Zhaohui Peng, Yue Zhu, Xiao Zhao, Xiangze Lin, Min Kang. Thermal characteristics analysis and error prediction for lubricated multi-link high speed precision presses[J].Journal of Mechanical Science and Technology, 2019, 33(6): 1-23. (SCI, IF: 1.194)
5.Enlai Zheng*, Song Cui, Yuanzhao Yang, Jinlin Xue, Yue Zhu, Xiangze Lin. Simulation of the vibration characteristics for agricultural wheeled tractor with implement and front axle hydro-pneumatic suspension[J].Shock and Vibration, 2019, 2019: 1-19. (SCI, IF: 1.857)
6.Song Cui,Enlai Zheng, Min Kang. A time-domain procedure for non-Gaussian stationary environmental testing using zero-memory non-linear transformation[J].Journal of Vibration and Control, 2019. (SCI, IF: 2.865)
7.Enlai Zheng*, Shilu Xie, Jin Zhang, Yue Zhu, Xiao Zhao, Xiangze Lin, Min Kang. An improved thermal model for characteristics analysis of multi-link ultra-precision press system[J].Journal of Mechanical Science and Technology, 2018, 32(1): 1-23.(SCI, IF:1.128)
8.郑恩来,张航,朱跃,康敏.含间隙超精密压力机柔性多连杆机构动力学建模与仿真[J].农业机械学报, 2017,48(1): 375-385. (EI)
9.Enlai Zheng*, Rui Zhu, Sihong Zhu, Xinjian Lu. A study on dynamics of flexible multi-link mechanism including joints with clearance and lubrication for ultra-precision presses[J].Nonlinear Dynamics, 2016, 83: 137-159. (SCI, IF:2.849)
10.Enlai Zheng*, Yindong Fan, Rui Zhu, Yue Zhu, Jieyu Xian. Prediction of the vibration characteristics for wheeled tractor with suspended driver seat including air spring and MR damper[J].Journal of Mechanical Science and Technology, 2016, 30 (9): 1-14. (SCI, IF:1.128)
11.Enlai Zheng*, Fang Jia, Sihong Zhu. Thermal modeling and characteristics analysis of the high speed press system[J].International Journal of Machine Tools and Manufacture, 2014, 85: 87-99. (SCI, IF: 3.037)
12.Enlai Zheng*, Fang Jia, Xinlong Zhou. Energe-based method for nonlinear characteristics analysis of Belleville springs[J].Thin-Walled Structures, 2014, 79: 52-61. (SCI, IF: 1.749)
13.Enlai Zheng*, Xinlong Zhou. Modeling and simulation of flexible slider-crank mechanism with clearance for closed high speed press system[J].Mechanism and Machine Theory, 2014, 74: 10-30. (SCI, IF: 1.66)
14.Enlai Zheng*, Xinlong Zhou, Sihong Zhu. Dynamic response analysis of block foundations with nonlinear dry friction mounting system to impact loads[J].Journal of Mechanical Science and Technology, 2014, 28(7): 2535-2548. (SCI, IF: 0.838)
授权专利：
1.郑恩来,马习文,彭昭辉,王天宇,林相泽,朱跃,康敏.一种新型多连杆重载伺服压力机[P].实用新型: ZL 0.4, 2019.03.20.
2.郑恩来,马习文,彭昭辉,杨远钊,林相泽,朱跃,康敏.一种用于重载伺服压力机的行星齿轮减速装置[P].实用新型: ZL6.X, 2019.06.18.
3.郑恩来,石鑫,张劲,徐斌,鲜洁宇,杨井华,金美付.一种压力机试验平台高度调节装置[P].发明专利: ZL 0.6, 2018.10.12.
4.郑恩来,彭昭辉,王天宇,李福星,朱跃,林相泽,钱筱琳,康敏.一种便于有限行程高精密伺服压力机取放件的模具[P].实用新型: ZL9.4, 2018.10.22.
5.郑恩来,彭昭辉,朱跃,林相泽,王永健,王全祥,康敏.一种多连杆伺服压力机[P].实用新型: ZL 2.1, 2018.09.11.
6.郑恩来,储磊,朱跃,林相泽,王永健,王全祥,康敏.一种适用于多连杆伺服压力机的润滑系统[P].实用新型: ZL8.4, 2018.09.11.
7.郑恩来,徐斌,张劲,储磊,彭昭辉.一种伺服压力机混合闭环控制系统[P].实用新型: ZL 3.X, 2018.05.15.
8.郑恩来,石鑫,张劲,徐斌,鲜洁宇,杨井华,金美付.一种压力机试验平台装模高度调节装置[P].实用新型: ZL8.2, 2017.09.19.
9.郑恩来,黄少俯,杨远钊,仲新宇,薛金林,高辉松,林相泽,朱跃. 一种刚度与阻尼可调式拖拉机驾驶室座椅悬架装置[P].实用新型: ZL1.6, 2019.08.09.
10.朱跃,伊利达尔 伊利亚斯,郑恩来,张为良.基于无源化的非线性弹簧悬架主动控制方法[P].发明专利: ZL 0.6, 2019.07.05.

奖励荣誉
1. 2020年获南京农业大学优秀教师荣誉称号
2. 2020年指导的本科生毕业设计获南京农业大学特等奖
3. 2019年获南京农业大学优秀硕士论文指导教师荣誉称号
4. 2019年获2017-2019年度南京农业大学工学院优秀教师荣誉称号
5. 2018年获南京农业大学工学院优秀班主任荣誉称号
6. 2018年获南京农业大学工学院优秀共产党员荣誉称号
7. 2017年指导的本科生毕业设计获南京农业大学二等奖
8. 2016年入选江苏省“青蓝工程”优秀青年骨干教师人才计划
9. 2016年指导的毕业设计获南京农业大学一等奖
10. 2016年获南京农业大学优秀共产党员荣誉称号
11. 2016年获南京农业大学工学院优秀班主任荣誉称号
12. 2015年入选南京农业大学第三批钟山****“学术新秀”人才计划

Name
Enlai Zheng
Gender
Male


Title
Associate Professor
Department
Department of Mechanical Design and Manufacturing

Degree
Ph.D
Telephone
+86 **

E-mail
enlaizheng@njau.edu.cn

Unit address
#40 Dianjiangtai Road, Pukou District, Nanjing,Jiangsu Province, China
Post code
210031

Research field
1. Dynamic and intelligent control of complex electromechanical system
2. Intelligent design technology for agricultural equipment

Social appointments
1. Member of Committee of Machine Dynamics, Chinese Society for Vibration Engineering; 2. Member of Committee of Rotor Dynamics, Chinese Society for Vibration Engineering; 3. Member of China Agricultural Machinery Youth Working Committee

Research projects
1. The Fundamental Research Funds for the Central Universities, Grant No. KYTZ201603, Development of intelligent dedicated CNC system for forging machine tools, 2016/01-2019/12, Project leader.
2. National Natural Science Foundation of China, Grant No. **, Study on influence mechanism of dynamic accuracy and error compensation for multi-link ultra-precision presses under high speed stamping condition, 2015/01-2017/12, Project leader.
3. Natural Science Foundation of Jiangsu Province, Grant No.BK**, Study on analysis of dynamic accuracy and error compensation for multi-link ultra-precision presses, 2014/07-2017/06, Project leader.
4. The Fundamental Research Funds for the Central Universities, Grant No. KJQN201558, Study on influence mechanism of dynamic accuracy and error compensation for multi-link ultra-precision presses under high speed stamping condition, 2015/01-2017/12, Project leader.
5. Postdoctoral Fund of China, Grant No. 2016M591855, Study on handling stability of influence mechanism for tractor/implements system under high speed plow tillage condition, 2016/01-2017/12, Project leader.
6. Postdoctoral Research Funding Schemes of Jiangsu Province, Grant No. **B, Theoretical and experimental research on the semi-active control of driver seat suspension system for tractor cab with stiffness and damping adjustable, 2014/03-2016/03, Project leader.
7.Innovation Fund of Science and Technology for Outstanding Youth from College of Engineering, Nanjing Agricultural University,Grant No.YQ201606, Research on vibration characteristics and control strategy of multi-link high speed precision servo press system, 2016/01-2018/12, Project leader.

Academic achievements
Selected Papers (Published)
1.Enlai Zheng, Lei Zhu, Shuyun Zhu, et al. Multi-body kinematics modeling and dynamic error analysis of planar flexible multi-link mechanism with lubrication clearance and crankshaft rotor-bearing structure[J].Journal of Mechanical Engineering, 2020, 56(3): 106-120.(EI)
2.Enlai Zheng*, Tianyu Wang, Jun Guo, Yue Zhu, Xiangze Lin, Yongjian Wang, Min Kang. Dynamic modeling and error analysis of planar flexible multilink mechanism with clearance and spindle-bearing structure[J].Mechanism and Machine Theory, 2019, 131: 234-260. (SCI, IF: 2.796)
3.Enlai Zheng*, Xinyu Zhong, Rui Zhu, Jinlin Xue, Song Cui, Huisong Gao, Xiangze Lin. Investigation into the vibration characteristics of agricultural wheeled tractor-implement system with hydro-pneumatic suspension on the front axle[J].Biosystems Engineering, 2019, 186: 14-33. (SCI, IF: 2.983)
4.Enlai Zheng*, Yuanzhao Yang, Zhaohui Peng, Yue Zhu, Xiao Zhao, Xiangze Lin, Min Kang. Thermal characteristics analysis and error prediction for lubricated multi-link high speed precision presses[J].Journal of Mechanical Science and Technology, 2019, 33(6): 1-23. (SCI, IF: 1.194)
5.Enlai Zheng*, Song Cui, Yuanzhao Yang, Jinlin Xue, Yue Zhu, Xiangze Lin. Simulation of the vibration characteristics for agricultural wheeled tractor with implement and front axle hydro-pneumatic suspension[J].Shock and Vibration, 2019, 2019: 1-19. (SCI, IF: 1.857)
6.Song Cui,Enlai Zheng, Min Kang. A time-domain procedure for non-Gaussian stationary environmental testing using zero-memory non-linear transformation[J].Journal of Vibration and Control, 2019. (SCI, IF: 2.865)
7.Enlai Zheng*, Shilu Xie, Jin Zhang, Yue Zhu, Xiao Zhao, Xiangze Lin, Min Kang. An improved thermal model for characteristics analysis of multi-link ultra-precision press system[J].Journal of Mechanical Science and Technology, 2018, 32(1): 1-23.(SCI, IF:1.128)
8.Enlai Zheng, Hang Zhang, Yue Zhu, et al. Dynamic modeling and simulation of flexible multi-link mechanism of ultra-precision press with clearance[J].Journal of Agricultural Machinery, 2017, 48(1): 375-385.(EI)
9.Enlai Zheng*, Rui Zhu, Sihong Zhu, Xinjian Lu. A study on dynamics of flexible multi-link mechanism including joints with clearance and lubrication for ultra-precision presses[J].Nonlinear Dynamics, 2016, 83: 137-159. (SCI, IF:2.849)
10.Enlai Zheng*, Yindong Fan, Rui Zhu, Yue Zhu, Jieyu Xian. Prediction of the vibration characteristics for wheeled tractor with suspended driver seat including air spring and MR damper[J].Journal of Mechanical Science and Technology, 2016, 30 (9): 1-14. (SCI, IF:1.128)
11.Enlai Zheng*, Fang Jia, Sihong Zhu. Thermal modeling and characteristics analysis of the high speed press system[J].International Journal of Machine Tools and Manufacture, 2014, 85: 87-99. (SCI, IF: 3.037)
12.Enlai Zheng*, Fang Jia, Xinlong Zhou. Energe-based method for nonlinear characteristics analysis of Belleville springs[J].Thin-Walled Structures, 2014, 79: 52-61. (SCI, IF: 1.749)
13.Enlai Zheng*, Xinlong Zhou. Modeling and simulation of flexible slider-crank mechanism with clearance for closed high speed press system[J].Mechanism and Machine Theory, 2014, 74: 10-30. (SCI, IF: 1.66)
14.Enlai Zheng*, Xinlong Zhou, Sihong Zhu. Dynamic response analysis of block foundations with nonlinear dry friction mounting system to impact loads[J].Journal of Mechanical Science and Technology, 2014, 28(7): 2535-2548. (SCI, IF: 0.838)
Patents:
1.Enlai Zheng, Xiwen Ma, Zhaohui Peng, et al. A new type of multi-link heavy-duty servo press[P]. ZL 0.4, 2019.03.20.
2.Enlai Zheng, Xiwen Ma, Zhaohui Peng, et al. Planetary gear reduction device for heavy-duty servo press[P]. ZL 6.X, 2019.06.18.
3.Enlai Zheng, Xin Shi, Jin Zhang, et al. Height adjusting device for press test platform[P]. ZL 0.6, 2018.10.12.
4.Enlai Zheng, Zhaohui Peng, Tianyu Wang, et al. A mold convenient for picking and placing parts of a limited stroke high-precision servo press[P]. ZL 9.4, 2018.10.22.
5.Enlai Zheng, Zhaohui Peng, Yue Zhu, et al. A multi-link servo press[P]. ZL 2.1, 2018.09.11.
6.Enlai Zheng, Lei Zhu, Yue Zhu, et al. A lubrication system suitable for multi-link servo press[P]. ZL 8.4, 2018.09.11.
7.Enlai Zheng, Bin Xu, Jin Zhang, et al. A hybrid closed-loop control system for servo press[P]. ZL 3.X, 2018.05.15.
8.Enlai Zheng, Xin Shi, Jin Zhang, et al. Device for adjusting height of mould installation of press test platform[P]. ZL 8.2, 2017.09.19.
9.Enlai Zheng, Shaofu Huang, Yuanzhao Yang, et al. Stiffness and damping adjustable tractor cab seat suspension device[P]. ZL 1.6, 2019.08.09.
10.Yue Zhu, Ilidar Ilias,Enlai Zheng, et al. Active control method of nonlinear spring suspension based on passive[P]. ZL 0.6, 2019.07.05.

Reward & honor
1.Honorary title of outstanding teacher of Nanjing Agricultural University (NJAU) in 2020
2.Special prize of NJAU of the graduation design of undergraduates guided in 2020
3.Honorary title of Excellent Master Thesis Supervisor of NJAU in 2019
4.Honorary title of outstanding teacher of the College of Engineering of NJAU during 2017-2019 in 2019
5.Honorary title of Excellent Teacher of the School of Engineering of NJAU in 2018
6.Honorary title of Excellent Communist Party Member of the School of Engineering of NJAU in 2018
7.Second prize of NJAU of the graduation design of undergraduates guided in 2017
8. Gainer of Outstanding teacher for “Qing Lan Project” in Jiangsu Province, 2016
9. Excellent academic supervisor in NJAU, 2016
10. Excellent member of the Communist Party in NJAU, 2016
11. Excellent class teacher in College of Engineering, NJAU, 2016
12. Gainer of “Zhongshan Academic Rookie” in NJAU, 2015 (an award, for only one teacher each college and selected once every two year)