博士生导师简介
梁云虹：女，1979年生，黑龙江鹤岗人，工学博士，教授/博导，吉林大学工程仿生教育部重点实验室，工程仿生国际合作基地副主任。Email：liangyunhong@jlu.edu.cn
地址：长春市人民大街5988号，吉林大学南岭校区仿生楼
电话：**-608
手机：**
一、研究方向
1、仿生机械结构设计与功能材料开发：主要从事机械部件轻质、高强、抗冲击、抗疲劳、止裂、耐磨仿生结构与功能材料耦合设计、可控制备、技术开发与应用研究。2、仿生自驱动机器人设计与智能材料开发：主要从事仿生自驱动、多响应、智能机器人、驱动器设计，3D与4D打印仿生自适应智能材料开发与制备。
二、主要履历
1. 2016.01-2017.01，英国曼彻斯特大学，访问学者2. 2016.09-至今，吉林大学，工程仿生教育部重点实验室，教授、博导
3. 2012.09-2016.09，吉林大学，工程仿生教育部重点实验室，副教授
4. 2011.07-2012.09，吉林大学，工程仿生教育部重点实验室，讲师
5. 2008.09-2011.06，吉林大学，工程仿生教育部重点实验室，博士后
6. 2005.09-2008.06，吉林大学，材料科学与工程学院，博士
7. 2002.09-2005.06，吉林大学，材料科学与工程学院，硕士
8. 1998.09-2002.06，佳木斯大学，材料科学与工程学院，学士
三、社会兼职
国际仿生工程学会（ISBE），创始会员；国际车辆地面力学学会（ISTVS），会员；
农业机械学会材料与制造技术分会委员
四、科研成果
4.1 出版专著
1. 任露泉, 梁云虹. 仿生学导论. 北京, 科学出版社, 2016.2. 任露泉, 梁云虹. 耦合仿生学. 北京, 科学出版社, 2012.
4.2 科研项目
近五年，负责国家级、省部级项目21项，包括国家自然基金青年基金项目1项，国家自然基金面上项目1项，国家重大科学仪器设备开发专项子项目1项，国防装备预研教育部支撑技术项目1项，教育部博士点新教师基金1项，吉林省科技发展计划项目1项，吉林省重大科技平台项目3D打印技术子项1项，国土资源部公益性行业科研专项经费项目子项1项，吉林省一汽锻造有限公司横向项目1项，吉林大学国防预研项目3项等。4.3 科研论文
第一责任作者与通讯作者公开发表SCI论文40余篇，第一责任作者Ei论文10篇。1. Yunhong Liang, Jian Peng, Xiujuan Li, Jubin Huang, Rongxian Qiu, Zhihui Zhang, Luquan Ren. Wettability and contact time on a biomimetic superhydrophobic surface. Materials, 2017, 10(3): 254.
2. Zhihui Zhang, Feixian Shao, Yunhong Liang*, Pengyu Lin, Xin Tong, Luquan Ren.Wear behavior of medium carbon steel with biomimetic surface under starved lubricated conditions. Journal of Materials Engineering and Performance, 2017, 26(7): 3420-3430.
3. Qian Zhao, Wenhua Hou, Yunhong Liang *, Zhihui Zhang, Luquan Ren. Design and Fabrication of Bilayer Hydrogel System with Self-Healing and Detachment Properties Achieved by Near-Infrared Irradiation. Polymers, 2017, 9(6): 237.
4. Qian Zhao, Luping Ning, Yunhong Liang *, Zhihui Zhang, Luquan Ren. Effect of Nanofibrillated Cellulose Content on the Temperature and Near Infrared Responses of Polyvinyl Butyral Nanofibers-Containing Bilayer Hydrogel System. Polymers, 2017, 9(7): 270.
5. Qian Zhao, Yunhong Liang*, Zhihui Zhang, et al. Effect of Al content on impact resistance behavior of Al-Ti-B4C composite fabricated under air atmosphere. Micron, 2016, 91: 11-21.
6. Qian Zhao, Yunhong Liang*, Zhihui Zhang, et al. Study on the Impact Resistance of Bionic Layered Composite of TiC-TiB2/Al from Al-Ti-B4C System. Materials, 2016, 9(8): 708.
7. Qian Zhao, Yunhong Liang*, Zhihui Zhang, et al.Microstructure and Dry-Sliding Wear Behavior of B4C Ceramic Particulate Reinforced Al 5083 Matrix Composite. Metals, 2016, 6(9): 227.
8. Yunhong Liang, Qian Zhao, Xiujuan Li, Luquan Ren. Study of the microstructure and mechanical properties of white clam shell. Micron, 2016; 87: 10-17.
9. Yunhong Liang, Qian Zhao, Xiujuan Li, Zhihui Zhang, Luquan Ren. Effect of Ti and C particle size on reaction behavior of thermal explosion (TE) reaction of Cu-Ti-C system under Ar and air atmosphere. Journal of Alloys and compounds, 2016; 679: 65-73.
10. Yunhong Liang, Jian Peng, Xiujuan Li, Xu Jinkai, Zhihui Zhang, Luquan Ren. From natural to biomimetic: the superhydrophobicity and the contact time. Microscopy Research and Technique, 2016, 79(8): 712-720.
11. Yunhong Liang, Qian Zhao, Zhiwu Han, Zhihui Zhang, Xiujuan Li, Luquan Ren. Reaction behavior of TiC/Cu composite via thermal explosion reaction (TE) under Ar and air atmosphere. Corrosion Science, 2015, 93: 283-292.
12. Yunhong Liang, Qian Zhao, Zhihui Zhang, Zhiwu Han, Xiujuan Li, Luquan Ren. In-situ fabrication of TiC-TiB2 precipitates in Mn-steel using thermal explosion (TE) casting. Journal of Materials Research, 2015, 30: 1019-1028.
13. Yunhong Liang, Qian Zhao, Zhiwu Han, Zhihui Zhang, Xiujuan Li, Luquan Ren. Dry-sliding friction and wear mechanism of TiC-TiB2 particulates locally reinforced Mn-steel matrix composite from a Cu-Ti-B4C system via a self-propagating high-temperature synthesis (SHS)-casting route. Tribology Transactions, 2015, 58: 567-575.
14. Yunhong Liang, Qian Zhao, Zhiwu Han, Zhihui Zhang, Xiujuan Li, Luquan Ren. Microstructures and wear behavior of the TiC ceramic particulate locally reinforced steel matrix composites from a Cu-Ti-C system. ISIJ International, 2015, 55: 319-325.
15. Yunhong Liang, Qian Zhao, Zhihui Zhang, Xiujuan Li, Luquan Ren. Effect of B4C particle size on the reaction behavior of self-propagation high-temperature synthesis of TiC-TiB2 ceramic/Cu composites from a Cu-Ti-B4C system. Int. Journal of Refractory Metals and Hard Materials, 2014, 46: 71-79.
16. Yunhong Liang, Qian Zhao, Zhihui Zhang, Xiujuan Li, Luquan Ren. Preparation and characterization of TiC particulate locally reinforcedsteel matrix composites from Cu-Ti-C system with various C particles. Journal of Asian Ceramic Societies, 2014, 2: 281-288.
17. Yunhong Liang, Qian Zhao, Zhihui Zhang, Zhaohua Lin, Luquan Ren. Fabrication of bionic composite material using self-propagating high-temperature synthesis in the Cu-Ti-B4C system during steel casting. Journal of Asian Ceramic Societies, 2013, 1: 339-345.
18. YunHong Liang, Zhiwu Han, Zhihui Zhang, XiuJuan Li, LuQuan Ren. Study on the reaction mechanism of self-propagating high-temperature synthesis of TiC in the Cu-Ti-C system. Materials Chemistry and Physics, 2012, 137: 200-206.
19. Yunhong Liang, Zhiwu Han, Zhihui Zhang, Xiujuan Li, Luquan Ren. Effect of Cu content in Cu-Ti-B4C system on fabricating TiC/TiB2 particulate locally reinforced steel matrix composites. Materials & Design, 2012, 40: 64-69.
20. Yunhong Liang, Zhiwu Han, Zhaohua Lin, Luquan Ren. Study on the reaction behavior of self-propagating high-temperature synthesis of TiC ceramic in the Cu-Ti-C system. Int. Journal of Refractory Metals and Hard Materials, 2012, 35: 221-227.
21. Yunhong Liang, He Huang, Xiujuan Li, Luquan Ren, Fabrication and analysis of the multi-coupling bionic wear-resistant material. Journal of Bionic Engineering, 2010, 7: S24-29.
22. Yunhong Liang, Huiyuan Wang, Yafeng Yang, Yuanyuan Wang, Qichuan Jiang, Evolution process of the synthesis of TiC in the Cu-Ti-C system. Journal of Alloys and Compounds, 2008, 452: 298-303.
23. Yunhong Liang, Huiyuan Wang, Yafeng Yang, Youlong Du, Qichuan Jiang, Reaction path of the synthesis of TiC-TiB2 in Cu-Ti-B4C system, International Journal of Refractory Metals & Hard Materials, 2008, 26: 383-388.
24. Yunhong Liang, Huiyuan Wang, Yafeng Yang, Ruyi Zhao, Qichuan Jiang, Effect of Cu content on the reaction behaviors of self-propagating high-temperature synthesis in Cu-Ti-B4C system, Journal of Alloys and Compounds, 2008, 462: 113-118.
25. Luquan Ren, Yunhong Liang. Preliminary studies on the basic factors of bionics. Science in China Series E: Technological Sciences, 2014, 57: 520-530.
26. Luquan Ren, Yunhong Liang, Biological couplings: classification and characteristic rules. Sci China Ser E-Tech Sci, 2009, 52(10): 2791-2800.
27. Luquan Ren, Yunhong Liang, Biological couplings: function, characteristics and implementation mode. Sci China Ser E-Tech Sci, 2010, 53(1):1-9.
28. xiujuan Li, Yunhong Liang, Ximei Tian, Luquan Ren, Guanlin Lu, The Research of Biology Coupling Characteristics on the Shells of Haliotis discus hannai Ino1. Advances in Natural Science, 2010, 3(2):164-169.
29. 梁云虹，任露泉. 人类生活及其仿生学初探. 吉林大学学报（工学版），2016，46：1373-1384.
30. 梁云虹, 任露泉.自然生境及其仿生学初探. 吉林大学学报: 工学版, 2016, 46: 1746-1756.
31. 任露泉，梁云虹. 生物耦元及其耦联方式，吉林大学学报（工学版），2009，39：1504-1511.
32. 任露泉，梁云虹. 生物耦合生成机制，吉林大学学报（工学版），2011，41：1348-1357.
33. 任露泉，梁云虹. 生物耦合及其分类学与特征规律研究,中国科学：技术科学，2010，40(1)：5-13.
34. 任露泉，梁云虹. 生物耦合功能特性及其实现模式,中国科学：技术科学，2010，40(3)：223-230.
4.4 发明专利
1. 梁云虹, 赵骞, 韩丽丽, 李秀娟, 张志辉, 任露泉. 一种仿生耦合耐磨材料的制备方法, CNA, 2013.2. 梁云虹, 赵骞, 韩丽丽, 李秀娟, 张志辉, 任露泉. 一种高强、高韧仿生功能表面耐磨复合材料的制备方法, 授权号：ZL1.9.
3. 梁云虹, 彭建，李秀娟, 张志辉, 任露泉. 一种铝合金不修饰的仿生超疏水、低粘附表面制备方法, CNA, 2016.
4.5 科研获奖
1. 梁云虹, 李秀娟, 张志辉, 林兆华, 韩志武. TiC和TiB2陶瓷的反应机制及其陶瓷增强的金属基复合材料制备，吉林省自然科学学术成果奖二等奖，2013年度。2. 李秀娟，梁云虹, 张志辉, 李建桥. 生物体止裂抗疲劳机理与规律研究, 吉林省自然科学学术成果奖二等奖，2013年度。
3. 梁云虹（负责人为第9发明人），高效耐久制动毂仿生耦合关键技术研究与应用，吉林省科学技术发明一等奖，2012年度。
4. 梁云虹（负责人为第10发明人），金属材料中原位内生强化相的形成与调控机制，吉林省科学技术发明一等奖，2013年度。
4.6 人才计划
1. 2015年度，获得国家留学基金委《未来科学家项目》高端人才培育计划资助，赴英国曼彻斯特大学进行访问交流1年。2. 2016年度，获得吉林大学优秀青年科学基金后备人选培育计划项目资助。
3. 2014年度，获得《吉林大学优秀青年教师培养计划》（重点培养阶段）人才项目，连续5年资助。
2017年8月21日
