姓名：王琥

　　性 别：男

　　出生年月：1975.10

　　民 族：汉

　　职称：副教授

　　最后学历、学位：工学博士

　　工作单位：湖南大学汽车车身先进设计制造国家重点实验室

　　通讯地址：长沙 湖南大学汽车车身先进设计制造国家重点实验室

　　邮政编码：410082

　　目前从事的研究领域及主要研究方向：

　　专业领域： 车辆工程

　　研究方向： 数值计算方法、工程优化问题

　　主要社会兼职：

　　国际杂志"International Journal of Scientific Computing"编委；

　　国际杂志"Computational Mechanics", "Advances in Engineering Software", "Journal of Materials Processing Technology", "Computers & Industrial Engineering"审稿人;

　　主要学习工作经历 :

　　1998年 获天津科技大学机械工程专业学士学位

　　2001年 获湖南大学机械工程硕士学位

　　2006年 获湖南大学车辆工程博士学位

　　2007年 获湖南大学副教授职称

　　近期主要论著 :

　　1. Wang Hu, (王琥) Li Enying and Li Guang Yao, The least square support vector regression coupled with parallel sampling scheme metamodelling technique and application in sheet forming optimization, Materials & Design, doi:10.1016/j.matdes.2008.08.014. (SCI,EI)

　　2. Wang Hu, (王琥) Li Enying, G.Y. Li and Z.H. Zhong. A metamodel optimization methodology based on multi-level fuzzy clustering space reduction strategy and its applications ,Computers & Industrial Engineering,2008;55(2):503-532. (SCI,EI)

　　3. W. Hu, (王琥) L. Enying, L.G. Yao, Optimization of drawbead design in sheet metal forming based on intelligent sampling by using response surface methodology, Journal of Materials Processing Technology, 2008; 206(1-3):45-55.(SCI,EI)

　　4. W. Hu, (王琥) G. Y. Li, Z. H Zhong, Optimization of sheet metal forming processes by adaptive response surface based on intelligent sampling method, Journal of Materials Processing Technology, 2008;197(1-3):77–88. (SCI,EI)

　　5. Wang Hu, (王琥) Li G. Y., Li Enying, Zhong Z. H. Development of metamodeling based optimization system for high nonlinear engineering problems, Advances in Engineering Software, Advances in Engineering Software 2008;39(8): 629–645. (SCI,EI)

　　6. Wang Hu, (王琥) Li G. Y., Li Enying, Zhong Z. H. Optimization of sheet metal forming processes by the use of space mapping based metamodeling method, The International Journal of Advanced Manufacturing Technology,10.1007/s00170-007-1253-z. (SCI,EI)

　　7. Wang H., (王琥) Li Guangyao, Han X., Zhong Zhi Hua, Development of parallel 3D RKPM meshless bulk forming simulation system, Advances in Engineering Software, 2007; 38:87–101. (SCI,EI)

　　8. Wang Hu, (王琥) Li Guang Yao, Zhong Zhi Hua, Parallel point interpolation method for three-dimensional metal forming simulations, Engineering Analysis with Boundary Elements ,2007;31:326–342.(SCI,EI)

　　9. Wang Hu, (王琥) Li Guang Yao, Zhong Zhi Hua Modification for automatic domain partition method of explicit finite element method, Proc. Int. Conf. Compt. Meth., Springer, 2004. (ISTP)

　　10. Wang H., (王琥) E.Y.Li, G.Y.Li, T.Chen, Intelligent sampling based adaptive space mapping response surface method for sheet metal forming optimization, International Journal of Product Development.(Accepted)(SCI源刊)

　　11. Wang Hu, (王琥), Li Enying, G. Y. Li, Optimization of sheet metal forming processes by the use of adaptive intelligent sampling scheme based metamodeling method, International Journal of Materials and Product Technology.(Accepted) (SCI源刊)

　　12. Enying Li, Guangyao Li, Guilin Wen, Hu Wang(王琥), Hopf bifurcation of the third-order Hénon system based on an explicit criterion, Nonlinear Analysis Series A Theory, Methods & Applications(2008). 10.1016/j.na.2008.04.038.(SCI源刊)

　　13. 王琥,李光耀,钟志华,基于移动最小二乘响应面法对汽车吸能部件优化关键技术的研究, 系统仿真学报.2007; 19(16),3824-3829.(EI)

　　14. 王琥,李光耀,钟志华,三维薄板成形过程的并行无网格法仿真分析,机械工程学报, 2006;42(4), 82-87, 2006. (EI)

　　15. 王琥,李光耀,钟志华,有限元并行计算中网格自动分区的优化,工程力学,2005;2:46-51.(EI)

　　16. 王琥,李光耀,钟志华,有限元并行计算自动分区方法的优化,计算机辅助设计与图形学学报, 2005;17(5),1766-1772.(EI)

　　在研项目:

　　国家自然科学基金重点项目，重点实验室开放基金等