一、简历
蒋仁言，男，1956年出生，湖南湘乡人，分别于1982年7月和1985年7月获得武汉理工大学机械工程专业学士和硕士学位。1985年进入长沙交通学院工作，分别于1992年和1998年晋升为副教授、教授。1996年获得澳大利亚昆士兰大学博士学位，1997-2005年间，先后在加拿大Saskatchewan大学、香港城市大学、香港理工大学和加拿大多伦多大学等四所大学从事可靠性建模与维修理论方面的研究。2005年被聘为长沙理工大学“质量、可靠性与维修研究所”所长。他是中国运筹学会可靠性分会理事，中国机械工程学会高级会员，中国机械工程学会可靠性工程分会第四届委员会委员，中国设备工程专家库高级专家，全国汽车行业设备管理理事会顾问，同时担任国际杂志“Reliability Engineering & System Safety”、“International Journal of Reliability and Applications”和“International Journal of Performability Engineering”编委。

二、研究方向
? 可靠性工程与管理
? 维修工程与管理
? 质量工程与管理
? 全寿命费用分析
? 多准则决策分析与多目标优化
? 汽车运用工程与车队综合管理。

三、科研项目及专著、论文
近三年科研项目：
1. 国家自然科学基金项目:多变量条件下状态维修建模理论研究，2014-2017。
2. 国家自然科学基金项目:可修系统的运行可靠性理论研究,2011-2013。
3. 国家自然科学基金项目:复杂系统的老化特征及形成机理研究，2008-2010。
4. 水电机械设备设计与维护湖北省重点实验室开放基金:水电站重要设备运行可靠性监测与最优维修决策研究,2010-2012。
5. 湖南省教育厅科学研究重点项目：多单元系统维修理论及应用研究,2007-2010。
6. 湖南省自然科学基金项目：“复杂工程系统全寿命健康管理模型与软件研究”，2011-2013(No. 10JJ5070)。
7. 长沙凯瑞重工机械有限公司,特种重型车辆故障预测与健康管理技术的应用研究,2010-2011。

专著：
1. 蒋仁言, D.N.P. Murthy (2008), Maintenance: Decision Models for Management.获中国科学院科学出版基金资助，科学出版社，308页。
2. 2、D.N.P. Murthy, Min Xie,蒋仁言(2003), Weibull Models, John Wiley & Sons, Hoboken, New Jersey, 375页。
3. 蒋仁言，左明健，可靠性模型和应用，机械工业出版社，1999，270页。
4. 蒋仁言，威布尔模型族：特性、参数估计和应用，科学出版社，1998，233页。
5. 蒋仁言，Introduction to Quality and reliability Engineering,(质量与可靠性工程基础),将于2015年由科学出版社出版与德国斯普林格联合出版。
论文发表
1995年以来，他在国际杂志上发表论文60余篇，发表国际会议论文50余篇，在国内杂志发表论文20余篇。
代表论文（2005年-至今）：
1. R. Jiang, Y. Guo, Estimating failure intensity of a repairable system to decide its Preventive Maintenance or Retirement, International Journal of Performability Engineering, 2014.
2. R. Jiang, A drawback and an improvement of the classical Weibull probability plot, Reliability Engineering and System Safety, 126 (2014), 135-142.
3. R. Jiang, Life restoration degree of minimal repair and its applications. Journal of Quality in Maintenance Engineering, Vol. 19 No. 4, 2013，pp. 413-428.
4. R. Jiang, A tradeoff Bx life and its applications. Reliability Engineering and System Safety 113 (2013) 1–6.
5. R. Jiang, A new bathtub curve model with a finite support, Reliability Engineering and System Safety,Volume 119, November 2013, Pages 44–51.
6. R. Jiang, A multivariate CBM model with a random and time-dependent failure threshold, Reliability Engineering and System Safety,Volume 119, November 2013, Pages 178–185.
7. Renyan Jiang Two Methods to Estimate the Change Points of a Bathtub Curve, International Journal of Performability Engineering, Vol. 9, No. 5, 2013, 569-579.
8. R. Jiang, C. Huang, Failure patterns of repairable systems and a flexible intensity function model, International Journal of Reliability and Applications, International Journal of Reliability and Applications, Vol. 13, No. 2, pp. 81-90, 2012.
9. R. Jiang, Weibull Process Model with Application for Modeling Bus-Motor Failures, Information - An International Interdisciplinary Journal. 2012.Vol. 15, No. 12 (B), December, 5541-5548.
10.R. Jiang, A general proportional model and modelling procedure, Quality and Reliability Engineering International, 28 (6), 634-647, 2012.
11.R. Jiang, Three new life distribution models for modeling field failure data. Communications in Statistics -- Theory and Methods, 41 (21), 3974-3987, 2012.
12.R. Jiang, Three extended geometric process models for modeling reliability deterioration and improvement, International Journal of Reliability and Applications, Vol. 12, No. 1, pp. 49-60, 2011.
13.R. Jiang, D.N.P. Murthy, A study of Weibull shape parameter: Properties and significance, Reliability Engineering & System Safety,Volume 96, Issue 12, December 2011, Pages 1619-1626.
14.R. Jiang, Discrete Competing Risk Model with Application to Modeling Bus-Motor Failure Data, Reliability Engineering and System Safety 95 (2010) 981–988.
15.R. Jiang, A simple approximation for the renewal function with an increasing failure rate. Reliability Engineering and System Safety 95 (2010) 963–969.
16.R. Jiang, G. Shi. Condition-based vehicle fleet retirement decision, International Journal of Performability Engineering, Vol. 6, No. 4, 2010, 355-362.
17.R. Jiang, Reliability Modeling and Aging Characteristics Analysis of Bus-Motor, International Journal of Performability Engineering, Vol. 6, No. 3, 2010, 279-287.
18.R. Jiang, An analytically tractable approximation to the renewal function, International Journal of Performability Engineering, Vol. 6, No. 2, 2010, 109-121.
19.R. Jiang, Optimization of Alarm Threshold and Sequential Inspection Scheme, Reliability Engineering and System Safety,Vol. 95, No. 3, 2010, 208-215.
20.R. Jiang, A non-parametric approach for modeling reliability growth of complex repairable systems, Maintenance and Reliability, 2009, No. 3, 77-81.
21.R. Jiang, An accurate approximate solution of optimal sequential age replacement policy for a finite-time horizon, Reliability Engineering & System Safety, Vol. 94, No. 8, 2009, 1245-1250。
22.R. Jiang and D.N.P. Murthy, Impact of Quality Variations on Product Reliability, Reliability Engineering and System Safety, Vol. 94, No. 2, 2009, 490-496.。
23.R. Jiang, A Gamma-normal series truncation approximation for computing the Weibull renewal function, Reliability Engineering and System Safety, Vol. 93, No. 4, 2008, 616-626.。
24.R. Jiang and A.K.S. Jardine, Health state evaluation of an item: a general framework and graphical representation, Reliability Engineering and System Safety, Vol. 93, No. 1, 2008, 89-99.
25.R. Jiang and A.K.S. Jardine (2007), An optimal burn-in preventive-replacement model associated with a mixture distribution, Quality and Reliability Engineering International, Vol. 23, No. 1, 83-93.
26.R. Jiang and A.K.S. Jardine (2006), Optimal failure-finding interval through maximizing availability. International Journal of Plant Engineering and Management, Vol. 11, No. 3, 174-178.
27.R. Jiang, A.K.S Jardine (2006), Composite scale modeling in the presence of censored data, Reliability Engineering and System Safety, Vol. 91, No. 7, 756-764.
28.R. Jiang, A.K.S Jardine (2005), Two optimization models of the optimum inspection problem, Journal of The Operational research Society, 56 (10): 1176-1183.
29.R. Jiang, Interval Partitioning For Empirical Mean Cumulative Function, The Seventh International Workshop on Applied Probability (IWAP 2014), June 16-19, 2014 inAntalya,Turkey.
30.R. Jiang, Optimization of quasi-periodic inspection scheme associated with delay time model, 8th International Conference on Modelling in Industrial Maintenance and Reliability (MIMAR), 13 - 15 July 2014,Oxford,UK, pp. 137-141.
31.R. Jiang, T. Wang, Log-Weibull distribution as a lifetime distribution, International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE 2013) & International Conference on Materials and Reliability (ICMR 2013), 851-854.
32.R. Jiang, Modified MPS Method for Fitting the Distribution with the Unknown Upper Bound, The 8th International conference on Mathematical Methods in Reliability 2013 (MMR 2013), 1 - 4 July 2013, Protea Hotel, Techno Park, Stellenbosch, South Africa; pages 152-155.
33.R. Jiang, Equal-risk acceptance sampling plan, 2013 The 3rd International Conference on Mechatronics and Intelligent Materials, MIM 2013, XiShuangBanNa, China, May 18-19, 2013, 690-699.
34.R. Jiang, Determination of two change points of a bathtub failure rate curve, the 19th International Conference on Industrial Engineering and Engineering Management: 2013
35.R. Jiang, Two new three-parameter bathtub failure rate models, Proceedings of APARM 2012, 215-222.
36.R. Jiang, Determination of two change points of a bathtub failure rate curve, Proceedings of the 3rd International Asia Conference on Industrial Engineering and Management Innovation, 2012, 1116-1120.
37.R. Jiang, Analysis of Censored Data with Partial Information. 2012 INFORMSBeijing.
38.R. Jiang, A timeliness-based optimal inspection interval associated with the delay time model,2012 Prognostics and System Health Management Conference(PHM-2012), MU3048.
39.R. Jiang, Two field reliability models of product under variable usage conditions, the 7th International Conference on Mathematical Methods in Reliability, June 20 - 24, 2011,Beijing,China, 461-466.
40.R. Jiang, Y. Tang, Influence factors and range of the Weibull shape parameter, the 7th International Conference on Mathematical Methods in Reliability, June 20 - 24, 2011,Beijing,China, 238-243.

四、获奖情况
1. 论文“An optimal burn-in preventive-replacement model associated with a mixture distribution, Quality and Reliability Engineering International”获湖南省第12届自然科学一等优秀学术论文。
2. 论文“An accurate approximate solution of optimal sequential age replacement policy for a finite-time horizon”获第十二届长沙市自然科学优秀学术论文一等奖。
3. 论文“A Gamma-normal series truncation approximation for computing the Weibull renewal function”获湖南省第13届自然科学一等优秀学术论文。
4. 论文“Impact of Quality Variations on Product Reliability”获湖南省第14届自然科学一等优秀学术论文。
5. 论文“Log-Weibull distribution as a lifetime distribution”获QR2MSE 2013 & ICMR 2013最优论文。
6. 长沙理工大学“教学名师奖”；
7. 长沙理工大学“教学奉献奖”。

五、联系方式
电 话：；
E-mail: jiang@csust.edu.cn