个人简介


徐国富
博士、二级教授、博士生导师，中南工业大学学士（机制与设备管理）、硕士（材料物理）,中南大学博士（材料物理与化学）；日本北海道大学访问****；现任材料科学与工程学院副院长。
近年来，先后承担了《物理冶金基础》、《材料结构分析》等本科生和研究生课程的实践教学指导，指导本科生36名、硕士生24名、博士生4名。
近年来，先后主持国家支撑计划、装备预研重点基金和军品配套、横向合作项目10余项。相关研究成果发表学术论文50余篇，其中包括国外学术刊物： Corrosion Science、J. Alloys and Comp、Mater. Sci. Eng. A、Material Charact.等。获省部级科研成果奖二项。
主要研究方向为：新型有色金属材料的设计、加工制备和组织性能与结构表征，以及材料的失效分析和性能测试。
现任社会兼职：全国高校材料学科实验教学研究会副理事长， 湖南省电机工程学会金属焊接专委会副主任委员，湖南省精密仪器测试协会失效分析专委会委员。
联系方式：
电话：（O）; E-mail:csuxgf66@csu.edu.cn； QQ:


学术成果



近年来以第一作者或通讯作者公开发表的部分论文：
Microstructure and mechanical properties of severely deformed Al-Mg-Sc-Zr alloy and their evolution during annealing, Materials Science & Engineering A(2019), DOI: https://doi.org/10.1016/j.msea.2018.12.063
Investigation on Hot Workability of Homogenized Al-Zn-Mg-Cu Alloy Based on Activation Energy and Processing Map，JOM, Vol.70(2018), No.6:993-999
Effects of Enhanced Solution Treatment on Stress Corrosion Behavior of Al-Zn-Mg-Cu Alloy，JOM, Vol. 70（2018）, No. 11：2692-2697
Effect of Precipitate State on Mechanical Properties, Corrosion Behavior, and Microstructures of Al–Zn–Mg–Cu Alloy，Metals and Materials International ， 24(2018):1046–1057
Mechanical Properties and Microstructure of an Al-Zn-Mg-Sc-Zr Alloy Processed by Warm Equal Channel Angular Pressing and Subsequent Aging，JOM, Vol.70（2018）, No.11：2684-2691
Precipitate behavior and mechanical properties of enhanced solution treated Al-Zn-Mg-Cu alloy during non-isothermal ageing，Journal of Alloys and Compounds, 735 (2018) 964-974
Excellent high strain rate superplasticity of Al-Mg-Sc-Zr alloy sheet produced by an improved asymmetrical rolling process, Journal of Alloys and Compounds, 715 (2017) 311-321
Unravelling the electrochemical properties and thermal behavior of NaNi2/3Sb1/3O2 cathode for sodium-ion batteries by in situ X-ray diffraction investigation，Electrochimica Acta，257 (2017) 146–154
Research on Constitutive Models and Hot Workability of As-Homogenized Al-Zn-Mg-Cu Alloy during Isothermal Compression. Metals and Materials International，Vol. 23, (2017),No. 3 ,591-602
Mechanical properties, corrosion behavior and microstructures of a nonisothermal ageing treated Al-Zn-Mg-Cu alloy. Materials Science & Engineering A, A688(2017)146-154
Nano-structure evolution of secondary Al3(Sc1-xZrx) particles during superplastic deformation and their effects on deformation mechanism in Al-Zn-Mg alloys. Journal of Alloys and Compounds, 695 (2017) 142-153
Study on Hot Workability of Al-5.87Zn-2.07Mg-2.28Cu Alloy Using Processing Map. JOM(Journal of the Minerals, Metals and Materials Society), Vol. 69(2017), No.4,725-733
Achieving high strain rate superplasticity of an Al-Mg-Sc-Zr alloy by a new asymmetrical rolling technology. Materials Science & Engineering A, A672(2016)98–107
Synergetic effects of Sc and Zr microalloying and heat treatment on mechanical properties and exfoliation corrosion behavior of Al-Mg-Mn alloys. Materials Science & Engineering A, 666(2016)
Superplastic behavior and microstructure evolution of a new Al-Mg-Sc-Zr alloy subjected to a simple thermomechanical processing. Materials Science & Engineering A, A669(2016)205–217
Effect of Sc and Er additions on superplastic ductilities in Al-Mg-Mn-Zr alloy.Journal of Central South University23(2016) 1283-1292
Mechanical Properties and Microstructure of TIG and FSW Joints of a New Al-Mg-Mn-Sc-Zr Alloy.Journal of Materials Engineering and Performance,25 (2016) 1249-1256
Mechanical Properties, Corrosion Behavior, and Microstructures of a MIG-Welded 7020 Al Alloy. Journal of Materials Engineering and Performance, 25 (2016) 1028-1040
Microstructure and mechanical properties of 7005 aluminum alloy processed by room temperature ECAP and subsequent annealing. Journal of Alloys and Compounds, 664 (2016) 518-529
Stress measurement at the interface between a Si substrate and diamond-like carbon/Cr/W films by the electronic backscatter diffraction method. Applied Physics Express, 9 (2016) 025504
Stress corrosion cracking of a high-strength friction-stir-welded joint of an Al-Zn-Mg-Zr alloy containing 0.25 wt% Sc. Corrosion Science,639(2015) 500-513
Achieving high superplasticity of a traditional thermal-mechanical processed non-superplastic Al-Zn-Mg alloy sheet by low Sc additions. Journal of Alloys and Compounds, 638(2015) 364-373
Microstructure and properties of the novel Cu–0.30Mg–0.05Ce alloy processed by equal channel angular pressing. Materials Science & Engineering A, 648 (2015) 252-259
Achieving high superplasticity of a new Al-Mg-Sc-Zr alloy sheet prepared by a simple thermal-mechanical process. Materials Science & Engineering A, 647 (2015) 333-243
Effects of Sc and Zr on mechanical property and microstructure of tungsten inert gas and friction stir welded aerospace high strength Al–Zn–Mg alloys. Materials Science & Engineering A, 639 (2015) 500-513
Excellent superplasticity and deformation mechanism of Al–Mg–Sc–Zr alloy processed via simple free forging. Materials Science & Engineering A, 624(2015) 124–131
Corrosion behaviour and mechanism of new aerospace Al-Zn-Mg alloy friction stir welded joints and the effects of secondary Al3ScxZr1-x nanoparticles. Corrosion Science, 90(2015) 359-374
Preparation and characterization of ZnSe/CdSe core-shell microspheres. Transactions of Nonferrous Metals Society of China, 25(2015) 1559-1567
Characterization of ZnSe microspheres synthesized under different hydrothermal conditions[J]. Transactions of Nonferrous Metals Society of China, 24(2014) 2588-2597
Tungsten Inert Gas and Friction Stir Welding Characteristics of 4-mm-Thick 2219-T87 Plates at Room Temperature and ?196 °C. Journal of Materials Engineering and performance, 23(2014) 2149-2158
Effects of Sc and Zr microalloying additions on the recrystallization, texture and mechanism of Al–Zn–Mg alloys. Journal of Alloys and Compounds, 580(2013) 412-426
EBSD characterization of twinning in cold-rolled CP-Ti. Materials characterization, 84(2013) 41-47
Dependence of twinning on matrix orientation in tensile deformed commercial purity titanium. Materials Science and Technology, 29(2013) 754-758
Constitutive relationship for high temperature deformation of Al-3Cu-0.5Sc alloy. Transactions of Nonferrous Metals Society of China, 23(2013) 1549?1555