删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Discussion on the heat treatment process of cold rolled Q345 steel in laboratory

本站小编 哈尔滨工业大学/2019-10-23

Discussion on the heat treatment process of cold rolled Q345 steel in laboratory

ZHANG Ming-ya, LIU Ji-yuan, ZHU Fu-xian, MA Shi-cheng

State Key Lab of Rolling and Automation,Northeastern University,Shenyang 110819,China



Abstract:

A new kind of DP steel with about 40% martensite in matrix was developed from cold rolled Q345 steel by continuous annealing simulation.Microstructure and mechanical properties obtained by conventional heat treatment certified that the microstructure matrix is composed of ferrite,pearlite and martensite,the samples exhibited high tensile strength and low yield ratio,however,the elongation is very low,only about 10%.Due to the high carbon content,low soaking temperature and relatively higher rapid cooling start temperature should be adopted for the new process.

Key words:  continuous annealing  high-strength steel  microstructure  mechanical property

DOI:10.11916/j.issn.1005-9113.2011.06.019

Clc Number:TG161

Fund:


相关话题/Discussion heat treatment process cold