基本信息Research profileAwards & HonorsGlimpse of lifeSelected PublicationsTeaching & Enrollment
Basic Information


Zhiwu Xu (许志武)

Ph.D, Associate professor

state Key Lab of Advanced Welding & Joining

Harbin Institute of Technology

Career & Research Experience
06. 2013 – 06. 2014VISITING SCHOLARTU Dortmund, GermanySponsored by CSC to work at Lehrstuhl für Werkstofftechnologie (LWT - Institute of Materials Engineering) in the field of brazing of dissimilar materials under the guidance of Prof. Dr.-Ing. W. Tillmann.

09. 2008 – 07. 2012POSTDOCTORAL RESEARCHERHarbin Institute of Technology, ChinaSupported by the China Postdoctoral Science Foundation to conduct a project titiled “Fabrication and fracture of bonded joint of aluminum matrix composites” under the guidance of Prof. Shanyi Du.

10. 2009 – PresentASSOCIATE PROFESSORHarbin Institute of Technology, China Supported by the Natural Science Foundation of China (2009) to carry out a project titled “Motion and interface wetting of filler micro-fluidicsin ultrasonic field”.

03. 2005 – 08. 2009LECTURERHarbin Institute of Technology, ChinaTook part in the project “Mechanism for rheological impact and diffusion-compound of liquid alloy to SiCp/Al under mechanical vibration”, which was supported by the Natural Science Foundation of China.

10. 2004 – 02. 2005RESEARCH ASSISTANTHarbin Institute of Technology, ChinaTook charge of the experimental work of the project “Mechanism for ultrasonically assisted bonding of liquid eutectic alloys with ceramic particles and mechanics at the solid-liquid interfaces” supported by the Natural Science Foundation of China.



Education
03. 2002 – 02. 2008DOCTOR / Materials Processing and EngineeringHarbin Institute of Technology, Harbin, China

Dissertation: “Mechanisms for ultrasonic assisted wetting and bonding of aluminum based composites by liquid filler and their applications”. This work was supported by the 6th ongoing excellent PH.D thesis Project of Harbin Institute of Technology, which aims to encourage the PH.D candidate to produce much more achievements and only top ten PH.D candidates can be granted in each academic year.

09. 2000 – 03. 2002 MASTER / Materials Processing and EngineeringHarbin Institute of Technology, Harbin, China

Dissertation: “Ultrasonic vibration aided interaction between Zn-Al alloy and Al₂O_3p/6061Al composites”. This work was approved for Direct Master to PH.D Program.

09. 1996 – 07. 2000BACHELOR / Materials Forming and ControlHarbin Institute of Technology, Harbin, China

Dissertation: “Investigation on network platform of examination system”.

Associations and Professional Activities
Member of Electron Microscope Society of Heilongjiang province (Jun 2007-)

Member of the 11^th Youth Federation of Heilongiang province

Vice president of Youth Association for Science & Technology of Harbin Institute of Technology (Jun 2007-)

Organization Chairman of The 1^st Science and Technology Forum for Youth of High School of China (May 2010, Harbin, China)

Journal Reviewing:

Composites Science and Technology, Materials Science & Engineering A, Materials Letters, Materials and Design, Vacuum, Computational Materials Science, Journal of Materials Science & Technology, Acta Metallurgica Sinica, etc.

Conference Reviewing：The 5^th and 6^th “International Conference on Physical and Numerical Simulation of Materials Processing” (ICPNS 2007, 2010)

“1^st Advanced Welding & Joining Technology Conference and international Forum on recent Advances in Welding Science and Technologies” (2009)

The 2nd International Conference on Manufacturing Science and Engineering (ICMSE 2011)

Research Interests (not limited to)


Physical and chemical problems related with joining of advanced materials and dissimilar materialsFundamentals of ultrasonic soldering & brazing processesDesign of bonding interface and evaluation of joint performanceSimulation of joining process

Funded Research

项目名称Ultrasonically driven pulse spreading of metal droplet and control of liquid/solid interface wetting

项目来源NFSC

开始时间2016-01-01

结束时间2019-12-12

项目经费744,000.RMB

担任角色负责

项目类别纵向项目

项目状态进行中



项目名称Motion and interface wetting of filler micro-fluidics in ultrasonic field

项目来源NSFC

开始时间2010-01-01

结束时间2012-12-01

项目经费210, 000 RMB

担任角色负责

项目类别纵向项目

项目状态完成



项目名称Mechanism for rheological impact and diffusion-compound of liquid alloy to SiCp/Al under mechanical vibration

项目来源NSFC

开始时间2006-01-01

结束时间2009-12-01

项目经费270,000RMB

担任角色参与

项目类别纵向项目

项目状态完成



项目名称Ultrasonically assisted bonding of liquid eutectic alloys with ceramic particles and mechanics at the solid-liquid interfaces

项目来源NSFC

开始时间2004-01-01

结束时间2006-12-01

项目经费250,000

担任角色参与

项目类别纵向项目

项目状态完成



项目名称Ultrasonic assisted friction stir welding of Al/Mg alloys in semi-solid state

项目来源NSFC

开始时间2013-01-01

结束时间2015-12-01

项目经费250,000 RMB

担任角色参与

项目类别横向项目

项目状态完成



项目名称Ultrasonically induced filling of liquid filler in non-wetting gap of aluminum metal matrix composites

项目来源China Postdoctoral Science Foundation

开始时间2010-01-01

结束时间2012-12-01

项目经费100,000 RMB

担任角色负责

项目类别纵向项目

项目状态完成



项目名称Ultrasonic soldering and electron beam welding of LF6 alloys

项目来源CETC (Chengdu)

开始时间2010-11-01

结束时间2011-12-01

项目经费200,000 RMB

担任角色参与

项目类别纵向项目

项目状态进行中



项目名称Low temperature joining technologies of aluminum alloys and their composites and the application fundamentals

项目来源MST, China

开始时间2008-09-01

结束时间2011-08-01

项目经费1200,000 RMB

担任角色参与

项目类别纵向项目

项目状态完成



项目名称In-situ observation of microstructure evolution of diffusion bonded sapphire, glass/metal interface

项目来源SKL-AWJ

开始时间2015-01-01

结束时间2016-12-01

项目经费10

担任角色负责

项目类别横向项目

项目状态完成



Research team


Jiuchun Yan (闫久春)

Ph.D, Professor / Vice dean of School of Materials Science and Engineering, Group head

Research fields:

Special joining technology and equipment

Microstructure and performance of bonding interface

Metallurgy of welding and joining

---

Xuesong Leng (冷雪松）

Ph.D, Associate professor


Research fields:

Vacuum hot rolling bonding technology

..........

---

Typical research results
To be renewed

荣誉称号
Gold award of China International patent fair (2012)

Award of Technological Invention Prize of Heilongjiang Province (Rank 4^th, 2011)

Award of National Science Foundation of China (2010)

Award of Natural Science Prize of Heilongjiang Province (Rank 4^th, 2009)

Award of excellent doctoral thesis of Harbin Inst. of Tech. (2009)

Award of state postdoctoral research fund of China (2009)

Award of postdoctoral research fund of Heilongjiang Province (2009)

Award of excellent doctoral graduate student of Heilongjiang Province (2008)

Award of outstanding paper on the Proceedings of the 13^th Annual Meeting of Soldering, Brazing and Special Joining Technology, China. (2005)

Award of “The Best ten students” in Harbin Inst. of Tech. (2005)

Award of The Samsung Scholarship (2004)

Award of second-class excellent paper on the Simulation International Conference, Harbin Inst. of Tech. (2003)

Academic Activities

新闻标题Conference & Visit

发表时间2015-03-24



天冶集团（天津经委下属企业参观）- 06.2009



上海电气电站集团参观 - 08.2010



台湾成功大学（2011.07）



全国材料科学与工程博士后论坛（哈尔滨） - 09.2011



美国匹兹堡（Pittsburgh）- 10. 2012



中国北京-06.2014



Lisbon, Portugal-09.2014



CAUSTL2015.11-Adelaide, Australia


新闻标题Holidays

发表时间2014-10-29
水上漂 - 07.2008
镜泊湖 - 07.2009
丹东捡到一个孩子 - 07.2011


伊春漂流 - 07.2012
Kaiser 大帝 （Porta-Westfalica）- 08.2013
法国巴黎铁塔 - 06.2014




Out of 8 hours

新闻标题Conference & Visit

发表时间2015-03-24



天冶集团（天津经委下属企业参观）- 06.2009



上海电气电站集团参观 - 08.2010



台湾成功大学（2011.07）



全国材料科学与工程博士后论坛（哈尔滨） - 09.2011



美国匹兹堡（Pittsburgh）- 10. 2012



中国北京-06.2014



Lisbon, Portugal-09.2014



CAUSTL2015.11-Adelaide, Australia


新闻标题Holidays

发表时间2014-10-29
水上漂 - 07.2008
镜泊湖 - 07.2009
丹东捡到一个孩子 - 07.2011


伊春漂流 - 07.2012
Kaiser 大帝 （Porta-Westfalica）- 08.2013
法国巴黎铁塔 - 06.2014



Book -出版物

出版物名称Measurement and Control of Welding Process - 焊接过程传感与控制

作者张广军，李海超，许志武

出版时间,完成时间2013-06-01

出版社哈尔滨工业大学出版社

简单介绍 《“十二五”国家重点图书出版规划项目材料科学研究与工程技术系列：焊接过程传感与控制》是根据焊接专业新教学大纲的“焊接过程传感与控制”课程编写的教材。主要内容包括：焊接过程中的传感与控制问题概述，典型传感器原理及特性，焊缝跟踪传感，焊缝成形传感，焊接过程计算机控制系统的组成、工作原理和设计方法，焊接过程控制方法，焊接过程传感与控制实例分析等。该书的读者对象为材料加工工程、焊接、自动化等专业的高年级本科生、研究生和教师，以及相关专业的科研技术人员。


Paper-论文期刊
Peer-reviewed

Zhiwu Xu, Zhengwei Li, Degang Zhao, Xuesong Liu, Jiuchun Yan. Effects of Zn on intermetallic compounds and strength of Al/Mg joints ultrasonically soldered in air. Journal of Materials Processing Tech. 2019, 271: 384-393.

Zhiwu Xu, Zhengwei Li, Liming Peng, Jiuchun Yan.Ultra-rapid transient liquid phase bonding of Mg alloys within 1 second in air by ultrasonic assistance. Materials & Design. 2019, 161: 72-79.

Zhiwu Xu, Zhengwei Li, Yushi Qi, Jiuchun Yan. Soldering porous ceramics through ultrasonic-induced capillary action and cavitation. Ceramics International. 2019, 45: 9293–9296.

Zhiwu Xu, Zhengwei Li, Lei Xu, Jiuchun Yan. Reduction of intermetallic compounds in ultrasonic-assisted semi-solid brazing of Al/Mg alloys. Science and Technology of Welding and Joining.2019, 24(2):163-170.

Zhengwei Li, Zhiwu Xu, Lin Ma, Sheng Wang, Xuesong Liu, Jiuchun Yan. Cavitation at filler metal/substrate interface during ultrasonic-assisted soldering. Part II: Cavitation erosion effect. Ultrasonics Sonochemistry. 2019, 50: 278-288.

Zhengwei Li, Zhiwu Xu, Lin Ma, Sheng Wang, Xuesong Liu, Jiuchun Yan. Cavitation at filler metal/substrate interface during ultrasonic-assisted soldering. Part I: Cavitation characteristics.Ultrasonics Sonochemistry. 2018, 49: 249-259.

ZhiwuXu, Zhengwei Li,Shijiang Zhong,Zhipeng Ma, Jiuchun Yan. Wetting mechanism of Sn to Zr_50.7Cu₂₈Ni₉Al_12.3bulk metallic glass assisted by ultrasonic treatment. Ultrasonics Sonochemistry. 2018, 48: 207-217.

Zhiwu Xu, Zhengwei Li, Jiaqi Li, Zhipeng Ma, Jiuchun Yan. Control Al/Mg intermetallic compound formation during ultrasonic-assisted soldering Mg to Al. Ultrasonics Sonochemistry. 2018, 46: 79-88.

Zhengwei Li, Zhiwu Xu, Dawei Zhu, Zhipeng Ma, Jiuchun Yan. Control of Mg₂Sn formation through ultrasonic-assisted transient liquid phase bonding of Mg to Al. Journal of Materials Processing Technology. 2018, 255:524-529.

许志武, 李政玮, 罗潇雨, 姬书得, 闫久春. 铝合金表面液态钎料声致铺展前沿氧化膜行为及其破除机制研究.稀有金属材料与工程. 2018, 47(11): 3426-3432.

Zhiwu Xu, Zhengwei Li, Shude Ji, Liguo Zhang. Refill friction stir spot welding of 5083-O aluminum alloy. Journal of Materials Science & Technology. 2018, 34(5): 878-885.

Zhengwei Li, Zhiwu Xu, Liguo Zhang, Zhongjie Yan. Friction spot welding of dissimilar 6063/5083 aluminium alloys. Materials Science and Technology. 2017, 33(14): 1626-1634.

许志武, 李政玮, 刘建光, 姜威, 闫久春. C_f/PPS复合材料辐射预热超声焊接工艺及其接头断裂分析. 焊接学报. 2017, 38(3): 121-124.

Z. W. Xu, L. Ma, J. G. Yang, J. J. Zhang, J. C. Yan. Ultrasonic induced rising and wetting of a Sn-Zn filler in an aluminum joint. Welding Journal. 2016, 95:264s-272s.

许志武, 马志鹏, 闫久春, 等. Ti/Al异种合金接头原位拉伸应变场及断裂行为的研究. 金属学报. 2016, 52(11): 1403-1412.

Wolfgang Tillmann, Marco Zimpel, Nelson Filipe Lopes Dias, Jan Pfeiffer, Lukas Wojarski, Zhiwu Xu. Mechanical and microstructural analysis of ultrsonically assisted induction-brazed TiAl6V4 joints. Weld World. 2015, 59: 901-909.

Zhiwu Xu, Lin Ma, Jiuchun Yan, Wei Chen, Shiqin Yang. Solidification microstructure of SiC particulate reinforced Zn–Al composites under ultrasonic exposure. Materials Chemistry and Physics. 2014, 148, (3): 824–832.

Lin Ma, Zhiwu Xu, Kun Zheng, Jiuchun Yan, Shiqin Yang. Vibration characteristics of aluminum surface subjected to ultrasonic waves and their effect on wetting behavior of solder droplets. Ultrasonics. 2014, 54: 929-937.

Chen, XG; Yan, JC; Gao, F; Wei, JH; Xu, ZW; Fan, GH. Interaction behaviors at the interface between liquid Al-Si and solid Ti-6A1-4V in ultrasonic-assisted brazing in air. Ultrasonics Sonochemistry. 2013, 20(1):144-154.

Xu Zhiwu, Ma Xing, Ma Lin, Yan Jiuchun, Yang Shiqin, Du Shanyi. Solidified microstructure of SiCp/Al composites bonds under ultrasonic vibration and their fracture characteristics. The Chinese Journal of Nonferrous Metals. 2013, 23(1): 63-72.

Zhiwu Xu, Lin Ma, Jiuchun Yan, Shiqin Yang, Shanyi Du. Wetting and oxidation during ultrasonic soldering of an alumina reinforced aluminum-copper-magnesium (2024 Al) matrix composite. Composites: Part A. 2012, 43: 407-414. (Times Cited: 2, from Web of Science)

J.C. Yan, Z.W. Xu, L. Shi, X. Ma, S.Q Yang. Ultrasonic assisted fabrication of particle reinforced bonds joining aluminum metal matrix composites. Materials and Design. 2011, 32: 343-347. (Times Cited: 13)

Xu Zhiwu, Yan Jiuchun, Wang Changsheng, Yang Shiqin. Propagation characteristic of ultrasonic and its effect on the wetting behavior of liquid filler. Transactions of the China Welding Institution. 2010, (12): 11-14.

Xu Zhiwu, Yan Jiuchun, Zhong Li, Yang Shiqin. Filling and wetting behaviors of liquid filler metal in the process of ultrasonic soldering of aluminum alloy. Journal of Materials Engineering. 2010, (10): 1-4.

Z. W. Xu, J. C. Yan, C. Wang, S. Q. Yang. Substrate oxide undermining by a Zn-Al alloy during wetting of alumina reinforced 6061 Al matrix composite. Materials Chemistry and Physics. 2008, 112: 831-837. (Times Cited: 6)

Z. W. Xu, J. C. Yan, W. Chen, S. Q. Yang. Effect of ultrasonic vibration on the grain refinement and SiC particle distribution in Zn-based composite filler metal. Materials Letters. 2008, 62(17-18): 2615-2618. (Times Cited: 10)

Z. W. Xu, J. C. Yan, J. N. Liu, S. Q. Yang. Floating of SiC particles in a Zn-Al filler metal. Materials Science & Engineering A. 2008, 474(1-2): 157-164. (Times Cited: 2)

S. X. Lv, Z. W. Xu, H. T. Wang, S. Q. Yang. Investigation on TIG cladding of copper alloy on steel plate. Science & Technology of Welding and Joining. 2008, 13(1): 10-16. (Times Cited: 3)

Z. W. Xu, J. C. Yan, B. Y. Zhang, X. L. Kong, S. Q. Yang. Behaviors of oxide film at the ultrasonic aided interaction interface of Zn-Al alloy and Al₂O_3p/6061Al composites in air. Materials Science & Engineering A. 2006, 415(1-2): 80-86. (Times Cited: 7)

Jiuchun Yan, Huibin Xu, Zhiwu Xu, Baoyou Zhang, Shiqin Yang. Interface structure changes during Vibration liquid phase bonding of SiCp/A356 composites in air. Composites: Part A. 2006, 37(9): 1458-1463. (Times Cited: 2)

Jiuchun Yan, Zhiwu Xu, Zhiyuan Li, Shiqin Yang. Microstructure characteristics and performance of dissimilar welds between magnesium alloy and aluminum formed by friction stirring. Scripta Materialia. 2005, 53(5): 583-589. (Times Cited: 76)

Z. W. Xu, J. C. Yan, G. H. Wu, X. L. Kong, S. Q. Yang. Interface structure and strength of ultrasonic vibration liquid phase bonded joints of Al₂O_3p/6061Al composites. Scripta Materialia. 2005, 53(7): 835-839. (Times Cited: 23)

Z. W. Xu, J. C. Yan, G. H. Wu, X. L. Kong, S. Q. Yang. Interface structure of ultrasonic vibration aided interaction between Zn-Al alloy and Al₂O_3p/6061Al composites. Composites Science and Technology. 2005, 65(13): 1959-1963. (Times Cited: 11)

Z. W. Xu, J. C. Yan, W. W. Zhao, H. B. Xu, S. Q. Yang. Thermal expansion behaviors of VLP diffusion-bonded joints of SiCp/A356 composites. Composites Science and Technology. 2005, 65(10): 1461-1467. (Times Cited: 1)

J. C. Yan, Z. W. Xu, G. H. Wu, X. L. Kong, S. Q. Yang. The evolution of interface structure in TLP bonded joints of Al₂O_3p/6061Al composites with Cu/Ni/Cu interlayers. Journal of Materials Science. 2005, 40: 5307-5309. (Times Cited: 1)

Zhiwu Xu, Jiuchun Yan, Xiangli Kong, Shiqin Yang. Interaction behaviors between Zn-Al alloy and Al₂O_3p/6061Al composite with aid of ultrasonic vibration. Trans. Nonferrous Met. Soc. China. 2005, 15: 60-65 Sp.

Jiuchun Yan, Zhiwu Xu, Shiqin Yang. Microstructure and mechanical performance of friction stir welded joints of AZ31 magnesium alloy. Trans. Nonferrous Met. Soc. China. 2005, 15: 21-24 Sp.

Jiuchun Yan, Huibin Xu, Zhiwu Xu, Dacheng Li, Shiqin Yang. Interface structure and formation mechanism of vacuum-free vibration liquid phase diffusion-bonded joints of SiCp/ZL101A composites. Trans. Nonferrous Met. Soc. China. 2005, 15(5): 993-996.

Jiuchun Yan, Zhiwu Xu, Shiqin Yang. Microstructure characteristics of interaction layer of Zn-Al eutectic alloy with Al₂O_3p/6061Al composites. Journal of Material Science and Technology. 2004, 20(4): 401-404. (Times Cited: 7)

Jiuchun Yan, Zhiwu Xu, Gaohui Wu, Shiqin Yang. Interface structure and mechanical performance of TLP bonded joints of Al₂O_3p/6061Al composites using Cu/Ni composite interlayers. Scripta Materialia. 2004, 51(2): 147-150. (Times Cited: 25)

Zhiwu Xu, Jiuchun Yan, Shixiong Lv, Shiqin Yang. Microstructure of interaction interface of Al-Si and Zn-Al alloys with Al₂O_3p/6061Al composites. Trans. Nonferrous Met. Soc. China. 2004, 14(2): 351-356. (Times Cited: 5)

Jiuchun Yan, Huibin Xu, Zhiwu Xu, Li Ma, Shiqin Yang. Modelling behavior of oxide film during vibration diffusion bonding of SiCp/A356 composite in air. Materials Science and Technology. 2004, 20: 1489-1492. (Times Cited: 6)

Xu Zhiwu, Lü Shixiong, Yan Jiuchun, Yang Shiqin. Solid phase bonding of discontinuously reinforced aluminum based metal matrix composites. Journal of Harbin Institute of Technology. 2004, 36(5): 593-598.

Lü Shixiong, Yu Zhishui, Xu Zhiwu, Yang Shiqin, Wu Lin. Flux-less pressure brazing of SiC_W/6061Al composites. Transactions of the China Welding Institution. 2001, (8): 73-76.

Conference Presentations

Z.W. Xu, J.C. Yan, S.Q Yang. Ultrasonic assisted soldering of aluminum metal matrix compoistes. Materials Science & Technology@#% 2012, Oct 7-11, 2012, Pittsburgh, USA.

Z.W. Xu, J.C. Yan, S.Q Yang. Bonding and joint microstructure control of Al MMCs with ultrasonic. Cross-strait Symposium on Green Materials and Processing Technology. Jul 3-7, 2011, Taiwan, China. ---Session invited speech.

Z.W. Xu, J.C. Yan, S.Q Yang. Behaviors of liquid filler metal and bond microstructure control with the aide of ultrasonic. Proceedings of the 18^th Annual Meeting of Soldering, Brazing and Special Joining Technology, China. Dec 3-5, 2010, Shenzhen, China. ---Session invited speech.

Z.W. Xu, J.C. Yan, L. Shi, S.Q. Yang. Ultrasonic Assisted Fabrication of Particle Reinforced Bonds Joining Aluminum Metal Matrix Composites. 2010 Joint China-Russia Symposium on Advanced Materials and Processing Technologies. May 24-28, 2010, Harbin, China. ---Session invited speech.

Z.W. Xu, J.C. Yan, S.Q. Yang. Filling of liquid filler by capillary and oxide behavior under the action of ultrasonic vibration. Annual Academic Seminar on Brazing & Soldering. Aug 29-31, 2006, Shanghai, China.

Z.W. Xu, J.C. Yan, S.Q. Yang. Ultrasonic vibration liquid phase bonding of Al₂O_3p/6061Al. Proceedings of the 13^th Annual Meeting of Soldering, Brazing and Special Joining Technology, China. May 2005, Shanghai, China. ---Session invited speech.

XU Zhiwu, YAN Jiuchun, YANG Shiqin. Microstructure and strength of Al₂O_3p/6061Al composites TLP bonded joint using Cu/Ni/Cu interlayers. International Conference on New Frontiers of Process Science and Engineering in Advanced Materials. Nov. 24-26, 2004, Kyoto, Japan.



Patent-专利
J.C. Yan, W.W. Zhao, H.B.Xu, D.C. Li, Z.W. Xu, Z.P. Ma. Ultrasonic Brazing of Aluminum Alloy and Aluminum Matrix Composite. Patent No.: US 7, 624, 906 B2. Date: Dec 29, 2009.

许志武, 张博, 马琳, 薄俊兰, 闫久春. 一种利用超声波空蚀加工平板表面微坑的方法. ZL**0.5. 授权日期：2016.9.22.

Z.W. Xu, S.Y. Zhang, B.S Li, J.T. Ye, N. Wang. A kind of Ultrasonic Driving Micro-pump for mm-grade Cellular Capillary (一种毫米级蜂窝毛细管超声微泵). Patent No.:ZL **.7. Date: Nov 21, 2012.

Z.W. Xu, J.C. Yan, Y. Zhang, W.W. Zhao, S.Q. Yang. Method for Homogenizing the Particles in the Bond Region during Joining of Aluminum Matrix Composites (焊接铝基复合材料使焊缝区域增强相均匀分布的方法). Patent No.: ZL **4. X. Date: Jun 9, 2010.

Z.W. Xu，Y. Zhang, H.B. Xu, J.N. Liu, J.C. Yan, S.Q. Yang. Equipment and Fabrication of Composite Filler used in the Joining of Particle Reinforced Aluminum Matrix Composites (用于颗粒增强铝基复合材料焊接的复合焊料的制法及设备). Patent No.: ZL **8. 6. Date: Jul 22, 2009.

Z.W. Xu, Y. Zhang, W.W. Zhao, J.C. Yan, D.C. Li, H.C. Yu, S.Q. Yang. Ultrasonic Vibration Liquid Bonding Equipment for Aluminum Alloys and their Composites (铝、铝合金及其复合材料超声振动液相焊接设备). Patent No.: ZL **4. 2. Date: Jun 17, 2009.

J.C. Yan, W.W. Zhao, Z.P. Ma, Z.W. Xu, S.Q Yang. Method for Fabrication of High Temperature Serving Joint with Low Melting Filler Alloys (低温钎焊合金获得高温使用性能焊接接头的方法). Patent No.: ZL **6. X. Date: Jul 29, 2009.

J.C. Yan, Z.W. Xu, H.B. Xu, Y. Zhang, D.C. Li, H.C. Yu, S.Q Yang. Vibration Liquid Bonding of Discontinuously Reinforced Aluminum Matrix Composites using Composite Filler Metal (填充复合焊料非连续增强铝基复合材料振动液相焊接方法). Patent No.: ZL **5. 5. Date: Jan 23, 2008.

J.C. Yan, Z.W. Xu, S.W. Lin, S.Q. Yang. Ultrasonic Capillary Joining of Aluminum Matrix Composites (铝基复合材料超声波毛细焊接方法). Patent No.: ZL **4. 8. Date: Jul 18, 2007.

Z.W. Xu, J.C. Yan, G.Y. Ye, S.Q. Yang. Ultrasonic-resistance Welding of Aluminum Matrix Composites (铝基复合材料超声－电阻焊接技术). Patent No.: ZL **8. 8. Date: Sep 26, 2007.

J.C. Yan, S.X Lü, Z.W. Xu, S.Q Yang, H.B. Xu. Vibration Liquid Joining of aluminum matrix Composites (铝基复合材料液相振动焊接方法). Patent No.: ZL **.1. Date: Oct 26, 2005.

Course-讲授课程
Joining of Advanced materials For seniors majoring in Welding Science and Technology, Harbin Inst. of Tech.

Description:

Joining of advanced materials is an application-oriented course that aims to widen the specialized knowledge of the students and enables them to comprehensively utilize what have learned. Problems that occur during joining of advanced materials with special structure in various engineering fields are analyzed and the applications and principle of some typical joining methods are introduced. Joining principle and physics, chemistry and metallurgical process of ceramic, ceramic based composites, intermetallic compounds, aluminum metal matrix composites, resin based composites, C/C composites, superfine grain steel are emphasized in the course.

Experiments for Welding Metallurgy & Weldability of Metal MaterialsFor juniors majoring in Welding Science and Technology, Harbin Inst. of Tech.

Description:

This is an accessory course of “Welding Metallurgy & Weldability of Metal Materials”, which is a main course for the juniors. In the course, students directly observe the welding process, including the flow of molten pool, initiation and propagation of crack, and learn how to improve and evaluate the joint property.



Enrollment-招生信息
Undergraduate-本科招生

1-3 students each year.

王柽（2001）钟利、彭勃、郑明涛（2002）陈伟、李雪涛（2003）王贤英、陆永飞（2004）马星、齐福刚（2005）郑坤、张俊杰（2006）高源（2007）谭淇、危兆胜（2008）曹自维、韩天翼、费义鲲（2009）彭博、徐宏扬、张长安（2010）姜威、王莉、郝坤（2011）李嘉琪、罗潇雨、柴本（2012）朱大为、田卓然、何浩源（2013）王殿昭、曲家平、徐磊（2014）田淇予、刘欣然（2015）

Graduate-硕士招生:

1-2 students each year.

黎华栋（2011）汪生（2012）薄俊兰、张博（2013）钟诗江（2014）胡培军（2015）彭丽明、马晨曦（2016）柴本、赵德刚、冯炜（副导师）（2017）陈姝（2018）

Doctor candidate-博士招生:

马琳（2010）李政玮（2016）