基本信息研究与项目论文著作招生信息
基本信息
徐超，男，1984年生，博士，特任研究员/教授/博士生导师，材料科学与工程学科/分析测试中心。

长期从事高性能镁合金的研发及其应用基础研究。

2013年1月获得工学博士学位，并获“哈工大第十六届优秀博士学位论文奖”。

从2013年开始以博士后研究员身份在日本国立长冈技术科学大学先进镁工学研究中心工作，并于2016年初被聘为日本国立长冈技术科学大学材料工学讲座/先进镁工学研究中心助理教授。

2018年通过哈工大海外青年拔尖人才选聘计划聘为分析测试中心特任研究员。在高性能镁合金的设计、制备与微观组织调控、先进表征技术方面积累了大量经验。

在该领域主持中国国家自然科学基金1项、日本学术振兴会（JSPS）、日本文部科学省项目各1项，参与中国科技部国际合作项目、日本科学技术振兴机构（JST）先端低碳化技术开发项目（ALCA）以及多项与日本丰田、住友电工等企业共同研发项目，成功开发出多种型号的高强、耐热镁合金零部件。在《Acta Materialia》、《Scripta Materialia》、《Metallurgical and Materials Transactions A》等期刊发表SCI学术论文59篇，已被引用超700次，入选ESI高被引论文1篇，热点文章1篇，授权发明专利2项。


教育与工作经历
2019.04 至今 哈尔滨工业大学 材料科学与工程 博士生导师

2018.04 至今 哈尔滨工业大学 分析测试中心 特聘研究员/教授

2016.02 - 2018.03 日本长冈技术科学大学 先进镁工学研究中心 助理教授

2013.03 - 2016.01 日本长冈技术科学大学 先进镁工学研究中心 研究员

2010.10 - 2012.10 日本长冈技术科学大学 材料工学 博士联合培养

2009.09 - 2012.12 哈尔滨工业大学 材料学 博士

2007.09 - 2009.07 哈尔滨工业大学 材料学 硕士

2003.09 - 2007.07 哈尔滨工业大学 材料科学与工程 学士

讲授课程
本科生课程：

《材料分析测试方法 A 》、《材料分析测试方法Ⅱ》

博士生课程：

《材料微结构分析与表征方法》

学术任职
中国材料研究学会镁合金分会青年委员会 常务委员

研究领域
高性能镁合金的研发、镁合金的再结晶行为、塑性变形行为、析出动力学、强韧化机理等

基于同步辐射/三维X射线显微镜的三维表征技术等

科研项目

项目名称高强韧Mg-Gd-Y-Zn-Zr镁合金的构型化多模组织调控与强韧化机制研究

项目来源国家自然科学基金青年基金

开始时间2019.01

结束时间2021.12

项目经费￥240,000

担任角色 负责

项目类别 纵向项目

项目状态 进行中



项目名称高强韧稀土镁合金的构型化多模组织调控与强韧化机制研究

项目来源哈工大人才计划科研启经费

开始时间2018.07

结束时间2021.07

项目经费￥1,000,000

担任角色 负责

项目类别 纵向项目

项目状态 进行中



项目名称次世代超高強度高延性耐熱Mg合金的開発

项目来源青年基金 日本学术振兴会（JSPS）

开始时间2016.04

结束时间2018.03

项目经费￥270,000

担任角色 负责

项目类别 纵向项目

项目状态 完成



项目名称优秀青年学者科研启动经费

项目来源国立大学改革强化推进辅助金 日本文部科学省

开始时间2016.04

结束时间2017.03

项目经费￥400,000

担任角色 负责

项目类别 纵向项目

项目状态 完成


招生信息


真诚欢迎有材料、物理、化学背景的同学来课题组攻读学士、硕士、博士学位。

本科生招生：1~2人/年

硕士生招生：1~2人/年

博士生招生：1~2人/年

往年申请 — 考核的相关要求见研究生院网站

感兴趣的同学请发送信息至 cxu@hit.edu.cn

发表论文
C. Xu, M. Huang, H. Wu, K. S. Miao, G. Z. Tang, H. L. Xie, T. Q. Xiao, H. J. Kang, T. M. Wang, L. Geng, G. H. Fan. 3D Visualized Characterization of Fracture Behavior of Laminated Structural Metals Using Synchrotron Radiation Computed Microtomography, Quantum Beam Science (Review), 3 (2019) 5.

C. Xu, T. Nakata, G.H. Fan, K. Yamanaka, G.Z. Tang, L. Geng, Effect of Partially Substituting Ca with Mischmetal on the Microstructure and Mechanical Properties of Extruded Mg-Al-Ca-Mn based Alloys, Acta Metallurgica Sinica (English Letters), 32 (2019) 205-217.

K. S. Miao, D. Y. Li, G. Z. Tang, C. Xu, L. Geng, J. Zhang, X. S. Leng, H. J. Kang, T. M. Wang, S. Yan, H. L. Xie, T. Q. Xiao, G. H. Fan, High Elongation Achieved by Band-like Distribution of Reinforcements in Aluminum Matrix Composites, Materials Characterization, 144 (2018) 42-47.

C. Xu, G. H. Fan, T. Nakata, Y. Q. Chi, M. Y. Zheng, S. Kamado, Deformation Behavior of Ultra-strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure, Metallurgical and Materials Transactions A, 49 (2018) 1931-1947.

M. G. Jiang, C. Xu, H. Yan, G. H. Fan, T. Nakata, C. S. Lao, R. S. Chen, S. Kamado, E. H. Han, B. H. Lu, Unveiling the Formation of Basal Texture Bariations based on Twinning and Dynamic Recrystallization in AZ31 Magnesium Alloy during Extrusion, Acta Materialia, 157 (2018) 53-71.

M. G. Jiang, C. Xu, H. Yan, S. H. Lu, T. Nakata, C. S. Lao, R. S. Chen, S. Kamado, E. H. Han, Correlation Between Dynamic Recrystallization and Formation of Rare Earth Texture in a Mg-Zn-Gd Magnesium Alloy During Extrusion, Scientific Reports, 8 (2018) 16800.

M. Huang, C. Xu, G. H. Fan, E. Maawad, W. M. Gan, L. Geng, F. X. Lin, G. Z. Tang, H. Wu, Y. Du, D. Y. Li, K. S. Miao, T. T. Zhang, X. S. Yang, Y. P. Xia, G. J. Cao, H. J. Kang, T. M. Wang, T. X. Xiao, H. L. Xie, Role of Layered Structure in Ductility Improvement of Layered Ti-Al Metal Composite, Acta Materialia, 153 (2018) 235-249.

T. Nakata, C. Xu, K. Suzawa, K. Yoshida, N. Kawabe, S. Kamado, Enhancing Mechanical Properties of Rolled Mg-Al-Ca-Mn Alloy Sheet by Zn Addition, Materials Science and Engineering A, 737 (2018) 223-229.

Z. J. Yu, C. Xu, J. Meng, X. H. Zhang, S. Kamado, Microstructure Evolution and Mechanical Properties of As-extruded Mg-Gd-Y-Zr Alloy with Zn and Nd Additions, Materials Science and Engineering A, 713 (2018) 234-243.

C. Xu, T. Nakata, K. Ohishi, T. Homma, T. Ozaki, S. Kamado, Improving Creep Property of Mg-Gd-Zn Alloy via trace Ca Addition, Scripta Materialia, 139 (2017) 34-38.

C. Xu, T. Nakata, X. G. Qiao, M. Y. Zheng, K. Wu, S. Kamado, Effect of LPSO and SFs on Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr, Scientific Reports, 7 (2017) 40846.

C. Xu, T. Nakata, X.G. Qiao, M.Y. Zheng, K. Wu, S. Kamado, Ageing Behavior of Extruded Mg-Gd-Y-Zn-Zr Alloy Containing LPSO Phase and γ′ Precipitates. Scientific Reports, 7 (2017) 43391.

C. Xu, T. Nakata, X. G. Qiao, H. S. Jiang, W. T. Sun, Y. Q. Chi, M. Y. Zheng, S. Kamado, Effect of Extrusion Parameters on Microstructure and Mechanical Properties of Mg-7.5Gd-2.5Y-3.5Zn-0.9Ca-0.4Zr (wt.%) Alloy, Materials Science and Engineering A, 685 (2017) 159-167.

C. Xu, J. P. Pan, T. Nakata, X. G. Qiao, Y. Q. Chi, M. Y. Zheng, S. Kamado, Hot Compression Deformation Behavior of Mg-9Gd-2.9Y-1.9Zn-0.4Zr-0.2Ca (wt.%) Alloy, Materials Characterization, 124 (2017) 40-49.

C. Xu, T. Nakata, M. Y. Zheng, S. Kamado, Development of Ultra-high Strength and Ductile Mg-Gd-Y-Zn-Zr Alloys by Extrusion with Forced Air Cooling, Magnesium Technology, (2017) 23-28.

T. Nakata, C. Xu, R. Ajima, K. Shimizu, S. Hanaki, T. T. Sasaki, L. Ma, K. Hono, S. Kamado, Strong and Ductile Age-hardening Mg-Al-Ca-Mn Alloy that can be Extruded as Fast as Aluminum Alloys, Acta Materialia, 130 (2017) 261-270.

W. T. Sun, C. Xu, X. G. Qiao, M. Y. Zheng, S. Kamado, N. Gao, M.J. Starink, Evolution of Microstructure and Mechanical Properties of An As-cast Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr Alloy Processed by High Pressure Torsion, Materials Science and Engineering A, 700 (2017) 312-320.

M. G. Jiang, C. Xu, T. Nakata, H. Yan, R. S. Chen, S. Kamado, Enhancing Strength and Ductility of Mg-Zn-Gd Alloy via Alow-speed Extrusion Combined with Pre-forging, Journal of Alloys and Compounds, 694 (2017) 1214-1223.

M.G. Jiang, C. Xu, T. Nakata, H. Yan, R.S. Chen, S. Kamado, High-speed Extrusion of Dilute Mg-Zn-Ca-Mn Alloys and its Effect on Microstructure, Texture and Mechanical Properties, Materials Science and Engineering A, 678 (2016) 329-338.

Z. Yu, C. Xu, J. Meng, X. Zhang, S. Kamado, Effects of Pre-Annealing on Microstructure and Mechanical Properties of As-Extruded Mg-Gd-Y-Zn-Zr Alloy, Journal of Alloys and Compounds, 729 (2017) 627-637.

Z. Yu, C. Xu, J. Meng, X. S. Kamado, Microstructure Evolution and Mechanical Properties of a High Strength Mg-11.7Gd-4.9Y-0.3Zr (wt%) Alloy Prepared by Pre-Deformation Annealing, Hot Extrusion And Ageing, Materials Science and Engineering A, 703 (2017) 348-358.

T. Nakata, C. Xu, T.T. Sasaki, Y. Matsumoto, K. Shimizu, K. Hono, S. Kamado, Development of High-Strength-Extrudable Mg-Al-Ca-Mn Alloy, Magnesium Technology, (2017) 17-21.

T. Nakata, C. Xu, Y. Matsumoto, K. Shimizu, T. T. Sasaki, K. Hono, S. Kamado, Optimization of Mn Content for High Strengths in High-Speed Extruded Mg-0.3Al-0.3Ca (wt%) Dilute Alloy, Materials Science and Engineering A, 673 (2016) 443-449.

M.G. Jiang, C. Xu, T. Nakata, H. Yan, R.S. Chen, S. Kamado, Rare Earth Texture and Improved Ductility in a Mg-Zn-Gd Alloy after High-Speed Extrusion, Materials Science and Engineering A, 667 (2016) 233-239.

M.G. Jiang, C. Xu, T. Nakata, H. Yan, R.S. Chen, S. Kamado, Development of Dilute Mg-Zn-Ca-Mn Alloy with High Performance via Extrusion, Journal of Alloys and Compounds, 668 (2016) 13-21.

L.B. Tong, J.B. Zhang, C. Xu, X. Wang, S.Y. Song, Z.H. Jiang, S. Kamado, L.R. Cheng, H.J. Zhang, Enhanced Corrosion and Wear Resistances by Graphene Oxide Coating on The Surface of Mg-Zn-Ca Alloy, Carbon, 109 (2016) 340-351.

H.S. Jiang, X.G. Qiao, C. Xu, M.Y. Zheng, K. Wu, S. Kamado, Ultrahigh Strength As-Extruded Mg–10.3Zn–6.4Y–0.4Zr–0.5Ca Alloy Containing W Phase, Materials and Design, 108 (2016) 391-399.

C. Xu, M. Y. Zheng, S. W. Xu, K. Wu, E. D. Wang, G. H. Fan, S. Kamado, Improving Strength and Ductility of Mg-Gd-Y-Zn-Zr Alloy Simultaneously via Extrusion, Hot Rolling and Ageing, Materials Science and Engineering A, 643 (2015) 137-141.

T. Nakata, T. Mezaki, C. Xu, K. Ohishi, K. Shimizu, S. Hanaki, S. Kamado, Improving Tensile Properties of Dilute Mg-0.27Al-0.13Ca-0.21Mn (at. %) Alloy by Low Temperature High Speed Extrusion, Journal of Alloys and Compounds, 648 (2015) 428-437.

T. Nakata, T. Mezaki, R. Ajima, C. Xu, K. Ohishi, K. Shimizu, S. Hanaki, T. T. Sasaki, K. Hono, S. Kamado, High-Speed Extrusion of Heat-Treatable Mg-Al-Ca-Mn Dilute Alloy, Scripta Materialia, 101 (2015) 28-31.

C. Xu, M. Y. Zheng, S. W. Xu, K. Wu, E. D. Wang, S. Kamado, G. J. Wang, X. Y. Lv, Influence of Rolling Temperature on the Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy Sheets, Materials Science and Engineering A, 559 (2013) 615-622.

C. Xu, M. Y. Zheng, K. Wu, E. D. Wang, G. H. Fan, S. W. Xu, S. Kamado, X. D. Liu, G. J. Wang, X. Y. Lv, Effect of Final Rolling Reduction on the Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy Sheets, Materials Science and Engineering A, 559 (2013) 232-240.

C. Xu, M. Y. Zheng, K. Wu, E. D. Wang, G. H. Fan, S. W. Xu, S. Kamado, X. D. Liu, G. J. Wang, X. Y. Lv, Effect of Cooling Rate on the Microstructure Evolution and Mechanical Properties of Solution Treated Mg-Gd-Y-Zn-Zr Alloy, Materials Science and Engineering A, 559 (2013) 364-370.

C. Xu, M. Y. Zheng, S. W. Xu, K. Wu, E. D. Wang, S. Kamado, G. J. Wang, X. Y. Lv, Microstructure and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy Sheets Processed by Extrusion, Hot Rolling and Ageing, Materials Science and Engineering A, 559 (2013) 844-851.

C. Xu, M. Y. Zheng, K. Wu, E. D. Wang, G. H. Fan, S. W. Xu, S. Kamado, X. D. Liu, G. J. Wang, X. Y. Lv, Effect of Ageing Treatment on the Precipitation Behavior of Mg-Gd-Y-Zn-Zr Alloy, Journal of Alloys and Compounds, 550 (2013) 50-56.

Y. Q. Chi, M. Y. Zheng, C. Xu, Y. Z. Du, X. G. Qiao, K. Wu, X. D. Liu, G. J. Wang, X. Y. Lv, Effect of ageing treatment on the microstructure, texture and mechanical properties of extruded Mg-8.2Gd-3.8Y-1Zn-0.4Zr (wt.%) alloy, Materials Science and Engineering A, 565 (2013) 112-117.

Y. Z. Du, M. Y. Zheng, C. Xu, X. G. Qiao, K. Wu, X. D. Liu, G. J. Wang, X. Y. Lv, Microstructures and Mechanical Properties of As-cast and As-extruded Mg-4.50Zn-1.13Ca (wt.%) Alloys, Materials Science and Engineering A, 576 (2013) 6-13.

G. D. Fan, M. Y. Zheng, X. S. Hu, C. Xu, K. Wu, I. S. Golovin, Improved Mechanical Property and Internal Friction of Pure Mg Processed by ECAP, Materials Science and Engineering A, 556 (2012) 588-594.

G. D. Fan, M. Y. Zheng, X. S. Hu, C. Xu, K. Wu, I. S. Golovin, Effect of Heat Treatment on Internal Friction in ECAP Processed Commercial Pure Mg, Journal of Alloys and Compounds, 549 (2013) 38-45.

H. Chang, M. Y. Zheng, W. M. Gan, C. Xu, H-G. Brokmeier, Texture Evolution of the Mg/Al Laminated Composite by Accumulative Roll Bonding at Ambient Temperature, Journal of Materials Science and Technology, 527 (2013) 3073-3078.

C. Xu, M. Y. Zheng, S. W. Xu, K. Wu, E. D. Wang, S. Kamado, G. J. Wang, X. Y. Lv, Microstructure and Mechanical Properties of Rolled Sheets of Mg-Gd-Y-Zn-Zr Alloy: As-Cast versus As-Homogenized, Journal of Alloys and Compounds, 528 (2012) 40-44.

C. Xu, S. W. Xu, M. Y. Zheng, K. Wu, E. D. Wang, S. Kamado, G. J. Wang, X. Y. Lv, Microstructures and Mechanical Properties of High-Strength Mg-Gd-Y-Zn-Zr Alloy Sheets Processed by Severe Hot Rolling, Journal of Alloys and Compounds, 524 (2012) 46-52.

C. Xu, M. Y. Zheng, S. W. Xu, K. Wu, E. D. Wang, S. Kamado, G. J. Wang, X. Y. Lv, Ultra High-Strength Mg-Gd-Y-Zn-Zr Alloy Sheets Processed by Severe Hot Rolling and Ageing, Materials Science and Engineering A, 547 (2012) 93-98.

C. Xu, M. Y. Zheng, Y. Q. Chi, X. J. Chen, K. Wu, G. H. Fan, E. D. Wang, S. W. Xu, S. Kamado, G. J. Wang, X. Y. Lv, Microstructure and Mechanical Properties of the Mg-Gd-Y-Zn-Zr Alloy Fabricated by Semi-Continuous Casting, Materials Science and Engineering A, 549 (2012) 128-135.

H. Chang, M. Y. Zheng, C. Xu, G. D. Fan, H-G. Brokmeier, K. Wu, Microstructure and Mechanical Properties of The Mg/Al Multilayer Fabricated by Accumulative Rolling (ARB) at Ambient Temperature, Materials Science and Engineering A, 543 (2012) 249-256.

C. Xu, M. Y. Zheng, H. Chang, X. S. Hu, K. Wu, W. M. Gan, H-G. Brokmeier, Microstructure and Properties of Pure Mg/ZK60 Laminate Processed by Accumulative Roll Bonding, Materials Science Forum, 650 (2010) 343-346.

专利
M. Y. Zheng, C. Xu, Y. S. Chen, E. D. Wang, Y. Z. Du, X. G. Qiao, X. S. Hu, X. J. Wang, K. Wu, Processing method of ultra high strength rare earth containing magnesium alloy sheets. China Patent, authorized number: ZL**0.X.

M. Y. Zheng, C. Xu, Y. Z. Du, X. G. Qiao, X. S. Hu, X. J. Wang, K. Wu, P. Yang, G. J. Wang, X. Y. Lv, semi-continuous casting technology of ultra high strength Mg-Gd-Y-Zn-Zr series alloy ingots. China Patent, authorized number: ZL**7.9.