姓 名
钱东升
性 别
男
民 族
汉
出生年月
1982年7月

职 称
教授
职 务
无
联系电话
**

单位名称
材料科学与工程学院
Email
qiands@whut.edu.cn

实验室网址


研究方向
1、高性能轴承形变相变协同成形制造理论与技术
2、特种环形构件近净轧制成形理论与技术
3、环形构件电磁场强化技术

教育背景
1998.09-2002.07: 武汉理工大学，机械设计与制造，学士
2002.09-2006.07: 武汉理工大学，材料加工工程，硕士
2006.09-2009.06: 武汉理工大学，材料加工工程，博士
2016.03-2017.02: 英国诺丁汉大学，工程学部，访问****

工作经历
2009.07-2011.09: 武汉理工大学，材料学院材料成型加工系，讲师
2011.10-2017.09: 武汉理工大学，材料学院材料成型加工系，副教授
2017.10至今: 武汉理工大学，材料学院材料成型加工系，教授

项目情况
1、厚壁深槽环件复合轧制成形机理与技术基础研究（国家自然科学基金,主持）
2、高速机床主轴轴承精度损失溯源研究（国家自然科学基金，主持）
3、航空发动机轴承基体强韧性与组织稳定性协同成形制造基础研究（国家自然科学基金，主持）
4、大型风电轴承环件精确轧制成形建模仿真与工艺控制研究（中国博士后科学基金，主持）
5、高性能汽车轴承近净回转成形技术基础研究（湖北省自然科学基金项目，主持）

代表性学术
成果
[1] 华林.钱东升.轴承精密轧制理论与技术. 北京：科学出版社，2017
[2] 钱东升. 异形截面环件冷轧力学原理和工艺理论研究. 武汉: 武汉理工大学出版社, 2012
[3] Wang Feng, Qian Dongsheng*, Hualin, Lu Xiaohui*. The effect of prior cold rolling on the carbide dissolution, precipitation and dry wear behaviors of M50 bearing steel, Tribology International, 2019, 132:253-264
[4] Hua Lin, Deng Jiadong, Qian Dongsheng*, Lan Jan, Long Hui. Modeling and application of ring stiffness condition for radial-axial ring rolling. International Journal of Machine Tools & Manufacture, 2016,110: 69-79
[5] Guo Jun, Qian Dongsheng*.Grain refinement limit during hot radial ring rolling of as-cast GCr15steel. Journal of Materials Processing Technology, 2016, 231:151-161
[6] Qian Dongsheng, Zhang Zhiqiang, Hua Lin*. An advanced manufacturing method for thick-wall and deep-groove ring-Combined ring rolling. Journal of Materials Processing Technology, 2013, 213(8):1258-1267
[7] 缪霞, 钱东升*, 宋燕利. 磁处理对GCr15轴承环冷轧-淬火残余应力影响规律研究. 机械工程学报, 2014, 50(16):112-118
[8] Qian Dongsheng*, Pan Yan. 3D coupled macro-microscopic finite element modelling and simulation for combined blank-forging and rolling process of alloy steel large ring. Computational Materials Science. 2013, 70: 24-36
[9] Qian Dongsheng, Hua Lin*, Pan Libo. Research on gripping conditions in profile ring rolling of raceway groove. Journal of Materials Processing Technology, 2009, 209(6):2794-2802
[10] Qian Dongsheng, Hua Lin*, Zuo Zhijiang. Investigation of distribution of plastic zone in the process of plastic penetration. Journal of Materials Processing Technology, 2007, 187:734-737



Prof. Qian Dongsheng
Address: 407 Room, Material Building, West Campus, Wuhan University of Technology
Email：qiands@whut.edu.cn Tel: +86-**






EDUCATION
1998.9-2002.7
B.S.
Material Processing Engineering, Wuhan University of Technology

2002.9-2006.7
M.E.
Material Processing Engineering, Wuhan University of Technology

2006.9-2009.6
Ph.D.
Material Processing Engineering, Wuhan University of Technology

2016.3-2017.2
Academic Visitor
Faculty of Engineering , University of Nottingham,





WORK EXPERIENCE
2009.7-2011.9
Lecturer
Department of Materials Processing, School of Materials Science andEnginnering, Wuhan University of Technology

2011.10-2017.09
Associate Professor
Department of Materials Processing, School of Materials Science and Enginnering, Wuhan University of Technology

2017.10-present
Professor
Department of Materials Processing, School of Materials Science and Enginnering, Wuhan University of Technology

RESEARCH PROJECT
National Natural Science Foundation of China, Project Leader
Fundamental Research on Forming Mechanism and Technique for Combined Ring Rolling of Thick-wall and Deep-groove

National Natural Science Foundation of China, Project Leader
Research on Origin Tracing for Precision Loss of Main Shaft Bearing in High-speed Machine Tool

National Natural Science Foundation of China, Project Leader
Fundamental Research on Forming Manufacturing of Aeroegine Bearing Body with Cooperative Control for Obdurability and Microstructural Stability

China Postdoctoral Science Foundation, Project Leader
Research on Precise Forming Simulation and Technology Control of Large Wind Power Bearing Ring

Natural Science Foundation of Hubei Province, Project Leader
Fundamental Research on Near-net-shape Rotary forming Technique High-performance Automobile Bearing

SELECTED PUBLICATION
[1] Hua Lin, Qian Dongsheng. Precision rolling theory and technology for bearing. Beijing: China Science Press, 2017.
[2] Qian Dongsheng. Research on mechanical principle and technology theory of profile cold ring rolling. Wuhan: Wuhan University of Technology Press, 2012.
[3] Wang Feng, Qian Dongsheng*, Hualin, Lu Xiaohui*. The effect of prior cold rolling on the carbide dissolution, precipitation and dry wear behaviors of M50 bearing steel, Tribology International, 2019, 132:253-264
[4] Hua Lin, Deng Jiadong, Qian Dongsheng*, Lan Jan, Long Hui. Modeling and application of ring stiffness condition for radial-axial ring rolling. International Journal of Machine Tools & Manufacture, 2016,110: 69-79
[5] Guo Jun, Qian Dongsheng*.Grain refinement limit during hot radial ring rolling of as-cast GCr15steel. Journal of Materials Processing Technology, 2016, 231:151-161
[6] Qian Dongsheng, Zhang Zhiqiang, Hua Lin*. An advanced manufacturing method for thick-wall and deep-groove ring-Combined ring rolling. Journal of Materials Processing Technology, 2013, 213(8):1258-1267
[7] Miao Xia, Qian Dongsheng, Song Yanli. Influence rule of steel GCr15 in process of cold ring rolling-quenching by magnetic treatment. Journal of Mechanical Engineering. 2014, 50(16):112-118
[8] Qian Dongsheng*, Pan Yan. 3D coupled macro-microscopic finite element modelling and simulation for combined blank-forging and rolling process of alloy steel large ring. Computational Materials Science. 2013, 70: 24-36
[9] Qian Dongsheng, Hua Lin*, Pan Libo. Research on gripping conditions in profile ring rolling of raceway groove. Journal of Materials Processing Technology, 2009, 209(6):2794-2802
[10]Qian Dongsheng, Hua Lin*, Zuo Zhijiang. Investigation of distribution of plastic zone in the process of plastic penetration. Journal of Materials Processing Technology, 2007, 187:734-737
PATENT
[1] Dongsheng Qian, Lin Hua , Huajie Mao, Qinglong Liu, Jiadong Deng. A manufacturing method of precision machine tool bearing with high precision stability. US**
[2] Lin Hua, Dongsheng Qian, Jiadong Deng. Combined Ring Rolling Method for Spherical Valve Body. United States Patent, US**
[3] Qian Dongsheng, Hua Lin, Mao Huajie, Cao Qiang. Cold ring rolling method for L-shaped section automobile wheel hub bearing rings. China invention patent, ZL7.5
[4] Qian Dongsheng, Hua Lin, Han Xinghui, Zhou Guanghua. A control method of ring rolling and cooling process for bearing rings with fine and uniform microstructure. China invention patent,, ZL7.X
[5] Qian Dongsheng, Yang Jun, Hua Lin, Liu Qinglong, Wang Feng. Warm ring rolling method for high carbon chromium bearing steel with nodular microstructure. China invention patent, ZL1.4
[6] Qian Dongsheng, Wu Junsan, Wang Xiaokai, Dai Yutong, Mao Huajie, Hua Lin. Hot ring rolling method for high alloy steel and large size rings with fine grain. China invention patent, ZL9.5
[7] Qian Dongsheng, Shi Dafang, Hua Lin, Wang Xiaokai, Zhang Ting. Radial-axial ring rolling method for of large double groove rings. China invention patent, ZL6.5
[8] Qian Dongsheng, Hua Lin, Zhang Zhiqiang. Combined ring rolling method for thick-wall and deep-groove ring. China invention patent, ZL7.4
[9] Qian Dongsheng, He Song, Deng Jiadong, Hua Lin. Compound feeding precision ring rolling method for fastigiate-groove rings. China invention patent, ZL1.7
[10]Qian Dongsheng, Hua Lin, Song Yanli, Miao Xia. Magnetic treatment method for machining residual stress control of bearing assembly. China invention patent, ZL3.1
INTERNATIONAL CONFERENCE
[1] The 10th International Conference on Technology of Plasticity, 2011, 9.25-30, Aachen, Germany
[2] The 11th International Conference on Technology of Plasticity, 2014.10.19-24, Nagoya, Japan
[3] The 4th International Conference on New Forming Technology 2015, 8.6-9,Glasgow, UK
[4] The 12th International Conference on Technology of Plasticity, 2017, 9.16-19, Cambridge, UK
[5] The 17th International Conference on Metal Forming, 2018.09.16-19, Toyohashi, Japan



附件下载: