一、姓名：丁庆军
　　二、基本情况：
　　1、出生年月： 1962年8月
　　2、学位：工学博士
　　3、职称：教授
　　4、工作院系：材料科学与工程学院
　　三、教育经历（从大学开始）：
　　起止年月
　　单位
　　专业
　　学位
　　1984.6~1990.6
　　武汉工业大学
　　硅酸盐工程
　　工学学士
　　1990.9~1994.6
　　武汉工业大学
　　无机非金属材料
　　工学硕士
　　2001.9~2009.8
　　武汉理工大学
　　材料科学与工程
　　工学博士
　　四、工作经历：
　　起 止 年 月
　　工 作 单 位
　　职务/职称
　　1984.7至1992.9
　　武汉工业大学
　　助教
　　1992.9至1998.9
　　武汉理工大学
　　讲师
　　1998.9至2002.6
　　武汉理工大学
　　副教授
　　2002.6至今
　　武汉理工大学
　　教授
　　五、研究领域（不多于3个）：
　　1、高性能水泥混凝土 2、改性沥青及沥青混凝土材料 3、道路桥梁材料
　　六、科研项目（不多于5项）：
　　1、国家重点基础研究发展“973”计划“严酷环境下长寿命混凝土材料微结构形成与调控”;
　　2、国家重点基础研究发展“973”计划“环境友好型现代混凝土基础研究”;
　　3、国家“863”项目“抗滑、阻燃、降噪多功能隧道路面结构设计与铺装技术”;
　　4、国家“十二五”科技支撑项目“高消纳率污泥再生轻集料及应用技术研究”;
　　5、国家自然科学基金项目“富含重金属工业渣泥制备防辐射混凝土用集料的焙烧机理及其服役特性”
　　七、代表性论文及著作（不多于10项）：
　　[1] 胡曙光，丁庆军.钢管混凝土.北京：交通出版社,2006.
　　[2] Ding Qingjun, Zhu Yuxue, Wang Yu, Huang Xiulin, Gong Zicheng.Effect of Molecular Structure of Polycarboxylate-type Superplasticizer on the Hydration Properties of C3S[J]. Journal of Wuhan University of Technology - Mater. Sci. Ed. 2012, 27(4):768-771.
　　[3] DING Qingjun , HU Chenguang , FENG Xiaoxin , HUANG Xiulin . Effects of Curing Regime on Polymerization of C-S-H in Hardened Cement Pastes[J]. Journal of Wuhan University of Technology - Mater. Sci. Ed.2013, 28(4):715-720.
　　[4] DING Qingjun , HU Chenguang , FENG Xiaoxin , HUANG Xiulin . Effect of curing regime on the distribution of Al3+ coordination in hardened cement pastes[J]. Journal of Wuhan University of Technology - Mater. Sci. Ed. 2013, 28(5):927-933.
　　[5] Q.J.Ding，K.Tian，H.X.Wang，Hu. Study on workability of simultaneous grouting material，6th international Symposium on Cement and Concrete/Canmet-ACI International Symposium on Concrete Technology for Sustainable Development，2006，1124-1128.
　　[6] 丁庆军，周孝军，牟廷敏等. 钢纤维增韧微膨胀钢管混凝土界面粘结性能研究.功能材料[J].2013, 44(6):809-813.
　　[7] 丁庆军，杨堃，黄修林等. 防辐射功能集料及其焙烧机理研究[J].核动力工程,2012,33(6):81-87.
　　[8] 丁庆军，沈凡，黄绍龙. 基于氢氧化铝阻燃体系的开级配沥青磨耗层防火面层研究[J].中南大学学报,2009,40(4):932-939.
　　[9] 丁庆军，刘新权，胡曙光.ATH沥青阻燃体系试验及机理分析[J].中国公路学报2008,21(5):10-15.
　　[10] 丁庆军,何真.现代混凝土胶凝浆体微结构形成机理研究进展[J].中国材料进展,2009,11(28):8-18.
　　八、联系方式：
　　1、Tel：**
　　2、E-mail：dingqj@whut.edu.cn
　　3、工作地址（实验室）：硅酸盐材料工程教育部重点实验室北楼415
　　


　　1.Name:DING Qingjun
　　2.Brief introduction:
　　1)Date of birth: 1962.8
　　2)Degree: Engineering Doctor
　　3)Title: Professor
　　4)Working department:School of Materials Science and Engineering
　　3.Education experience(after entering university):
　　Beginning and ending date
　　Working Department
　　Major
　　Degree
　　1984.6~1990.6
　　Wuhan University of Industry
　　Silicate Engineering
　　Engineering Bachelor
　　1990.9~1994.6
　　Wuhan University of Industry
　　Inorganic non-metallic materials
　　Engineering
　　Master
　　2001.9~2009.8
　　Wuhan University of Technology
　　Materials Science and Engineering
　　Engineering
　　 Doctor
　　4.Working experience:
　　1984.7~1992.9TA in Wuhan University of Industry
　　1992.9~1998.9Director of Research Office in Wuhan University of Technology/Instructor
　　1998.9~2002.6 Director of Research Office in Wuhan University of Technology/Associate Professor
　　2002.6 till nowProfessor of Wuhan University of Technology
　　5.Research field(no more than 3):
　　High Performance Concrete;Modified bitumen and asphalt concrete materials;Road and bridge materials
　　6.Research project(no more than 5):
　　[1]National Key Basic Research and Development "973" Program " Formation and Regulation of Microstructure of Long-life Concrete under Harsh Environment";
　　[2]National Key Basic Research and Development "973" Program " Basic Research on Environment-friendly Modern Concrete";
　　[3]National "863" Project "Skid,Fire-retardant,Noise Reduction Multifunctional Tunnel Pavement Design and Pavement Technology";
　　[4]National "Twelfth Five-Year" Project " Research on High Consumptive Rate Sludge Regeneration Lightweight Aggregate and application technology ";
　　[5]National Natural Science Foundation Project "Firing Mechanism and Service Characteristics of Aggregates in Radiation Concrete prepared by Industrial Heavy Metal-rich Sludge ";
　　7.Representative papers and works(no more than 10):
　　[1]Hu Shuguang, Ding Qingjun.Concrete Filled Steel Tube.Communications Press.Beijing.2006
　　[2]Ding Qingjun, Zhu Yuxue, Wang Yu, Huang Xiulin, Gong Zicheng.Effect of Molecular Structure of Polycarboxylate-type Superplasticizer on the Hydration Properties of C3S[J]. Journal of Wuhan University of Technology - Mater. Sci. Ed. 2012, 27(4):768-771.
　　[3]DING Qingjun , HU Chenguang , FENG Xiaoxin , HUANG Xiulin . Effects of Curing Regime on Polymerization of C-S-H in Hardened Cement Pastes[J]. Journal of Wuhan University of Technology - Mater. Sci. Ed.2013, 28(4):715-720.
　　[4]DING Qingjun , HU Chenguang , FENG Xiaoxin , HUANG Xiulin . Effect of curing regime on the distribution of Al3+ coordination in hardened cement pastes[J]. Journal of Wuhan University of Technology - Mater. Sci. Ed. 2013, 28(5):927-933.
　　[5]Q.J.Ding，K.Tian，H.X.Wang，Hu. Study on workability of simultaneous grouting material，6th international Symposium on Cement and Concrete/Canmet-ACI International Symposium on Concrete Technology for Sustainable Development，2006，1124-1128.
　　[6]DING Qing-jun,ZHOU Xiao-jun,MOU Ting-min,FAN Bi-kun,YAN Ya-lin. Bond properties at interface of steel fiber reinforced micro-expansion concrete filled steel tube[J],Functional Materials.2013, 44(6):809-813.
　　[7]DING Qing-jun,HUANG Xiu-lin,SUN Hua,YANG Kun.Study on Radiation Shielding Function Aggregate and its Calcination Mechanism[J],Nuclear Power Engineering.2012,33(6):81-87.
　　[8]DING Qing-jun,SHEN Fan,HUANG Shao-long. Flameproof road surface of open-graded asphalt friction course based on ATH flame-retarding system[J],Journal of Central South University (Science and Technology).2009,40(4):932-939.
　　[9]DING Qing-jun, LIU Xin-quan, SHEN Fan, HU Shu-guang.Test and Mechanism Analysis of ATH Asphalt Flame-retarding System[J],China Journal of Highway and Transport.2008,21(5):10-15.
　　[10]DING Qingjun, HE Zhen.Advances in Research on the Formation Mechanism of Cementitious Paste Microstructure in Current Concrete[J],MATERIALS CHINA.2009,11(28):8-18.
　　8.Contact information:
　　1)Tel: **
　　2)E-mail: dingqj@whut.edu.cn
　　3)Location of lab:Key Laboratory of Silicate Materials Engineering of Education Ministry , North Building 415


附件下载: