一、姓名：董淑娟
二、基本情况：
1、出生年月：1987.07
2、学位：博士
3、职称：研究员
4、工作院系：硅酸盐工程中心、硅酸盐建筑材料国家重点实验室
三、教育经历（从大学开始）：
2010.09-2013.12 法国贝尔福蒙贝利亚技术大学（UTBM）工学博士
2007.09-2010.06 西安交通大学工学硕士
2004.09-2007.06 聊城大学理学学士
四、工作经历：
2014.10-至今 武汉理工大学研究员
2014.01-2014.10法国贝尔福蒙贝利亚技术大学（UTBM）ATER博士后
五、研究领域（不多于3个）：
1. 材料合成与表面涂层技术；
2. 表面预处理与高性能涂层制备；
3. 高温热防护涂层的设计制备与表征。
六、科研项目（不多于5项）：
1. 国家自然科学基金青年基金项目、项目负责人；
2. 武汉理工大学自主创新基金项目、项目负责人；
3. 材料成形与模具技术国家重点实验室开放基金项目、项目负责人；
4. 硅酸盐建筑材料国家重点实验室自主创新基金项目、项目负责人
七、代表性论文及著作（不多于10项）：
1.S. Dong, et al. Multi-layered thermal barrier coatings fabricated by plasma-spraying and dry-ice blasting: Microstructure characterization and prolonged lifetime. Surface and Coatings Technology. 2013, 236, 557-567.
2.S. Dong, et al. Microstructure and properties of Cr2O3 coating deposited by plasma spraying and dry-ice blasting. Surface and Coatings Technology. 2013, 225, 58-65.
3.S. Dong, et al. Effect of dry-ice blasting on the deposition behavior of molybdenum particles onto aluminum and stainless steel substrate in plasma spraying process: From single splat to coating. Surface and Coatings Technology. 2015, 268, 46-51.
4.S. Dong,et al. Deposition of NiCrBSi coatings by atmospheric plasma spraying and dry-ice blasting: microstructure and wear resistance. Surface and Coatings Technology.2015, 268, 24-29.
5.S. Dong, et al. Dielectric properties of Al2O3 coatings deposited via atmospheric plasma spraying and dry-ice blasting correlated with microstructural characteristics. Appl. Phys. A-Materials Science&Processing. 2015, 118, 283-290.
6.S. Dong, et al. Fabrication of FeSiB magnetic coatings with improved saturation magnetization by plasma spray and dry-ice blasting. Journal of Alloys and Compound.2014, 584, 254-260.
7.S. Dong, et al. Improvement of adhesion of plasma-sprayed Al2O3 coatings by using dry-ice blasting. Materials Letters. 2012, 66(1), 289-291.
8.S. Dong,et al. Combination Effect of Dry-Ice Blasting and Substrate Preheating on Plasma-Sprayed CoNiCrAlY Splats. Journal of Thermal Spray Technology. 2013, 22(1), 61-68.
9.S. Dong, et al. Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings. Journal of Thermal Spray Technology. 2013, 22(2-3), 213-220.
10.S. Dong, et al. Preparation of aluminum coatings by atmospheric plasma spraying and dry-ice blasting and their corrosion behavior. Journal of Thermal Spray Technology. 2013, 22(7), 1222-1229.
八、联系方式：
1、Tel： ；159-9427-3518
2、E-mail：dongsj@whut.edu.cn；dongsj1987@163.com
3、工作地址（实验室）：硅酸盐建筑材料国家重点实验室301室
1. Name: Shujuan Dong
2. Brief introduction:
1) Date of birth: July 1987
2) Degree: Ph.D
3) Title: Research Professor
4) Working department: State Key Laboratory of Silicate Materials for Architectures
3. Education experience (after entering university):
2010.09-2014.12: University of Technology of Belfort-Montbeliard, Ph.D
2007.09-2010.06: Xi’an Jiaotong University, Master
2004.09-2007.06: Liaocheng University, Bachelor
4. Working experience:
2014.10-present: Wuhan University of Technology, Research Professor
2014.01-2014.10: University of Technology of Belfort-Montbeliard, ATER-Postdoc
5. Research field (no more than 3):
1) Materials synthesis and surface coating technology;
2) Surface treatment and preparation of high-performance coatings;
3) Design, preparation and characterization of thermal barrier coatings
6. Research project (no more than 5):
1) National Natural Science Foundation of China (Young Scholar Program);
2) Fundamental Research Funds for the Central Universities at Wuhan University of Technology;
3) Project of State Key Laboratory of Materials Processing and Die & Mould Technology;
4) Project of State Key Laboratory of Silicate Materials for Architectures
7. Representative papers and works (no more than 10):
1)S. Dong, et al. Multi-layered thermal barrier coatings fabricated by plasma-spraying and dry-ice blasting: Microstructure characterization and prolonged lifetime. Surface and Coatings Technology. 2013, 236, 557-567.
2)S. Dong, et al. Microstructure and properties of Cr2O3 coating deposited by plasma spraying and dry-ice blasting. Surface and Coatings Technology. 2013, 225, 58-65.
3)S. Dong, et al. Effect of dry-ice blasting on the deposition behavior of molybdenum particles onto aluminum and stainless steel substrate in plasma spraying process: From single splat to coating. Surface and Coatings Technology. 2015, 268, 46-51.
4)S. Dong,et al. Deposition of NiCrBSi coatings by atmospheric plasma spraying and dry-ice blasting: microstructure and wear resistance. Surface and Coatings Technology. 2015, 268, 24-29.
5)S. Dong, et al. Dielectric properties of Al2O3 coatings deposited via atmospheric plasma spraying and dry-ice blasting correlated with microstructural characteristics. Appl. Phys. A-Materials Science&Processing. 2015, 118, 283-290.
6)S. Dong, et al. Fabrication of FeSiB magnetic coatings with improved saturation magnetization by plasma spray and dry-ice blasting. Journal of Alloys and Compound.2014, 584, 254-260.
7)S. Dong, et al. Improvement of adhesion of plasma-sprayed Al2O3 coatings by using dry-ice blasting. Materials Letters. 2012, 66(1), 289-291.
8)S. Dong, et al. Combination Effect of Dry-Ice Blasting and Substrate Preheating on Plasma-Sprayed CoNiCrAlY Splats. Journal of Thermal Spray Technology. 2013, 22(1), 61-68.
9)S. Dong, et al. Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings. Journal of Thermal Spray Technology. 2013, 22(2-3), 213-220.
10)S. Dong, et al. Preparation of aluminum coatings by atmospheric plasma spraying and dry-ice blasting and their corrosion behavior. Journal of Thermal Spray Technology. 2013, 22(7), 1222-1229.
8. Contact information:
1) Tel: +86-；+86-159-9427-3518
2) E-mail：dongsj@whut.edu.cn；dongsj1987@163.com
3) Addresses: Room 301, State Key Laboratory of Silicate Materials for Architectures

附件下载: