姓 名
刘维
性 别
男
民 族
汉
出生年月
1986年9月

职 称
副教授
职 务
无
联系
电话
**

单位名称
武汉理工大学
材料科学与工程学院
Email
weiliu@whut.edu.cn

实验室网址
无

研究方向
（1） 先进材料本构理论与数字化成形
（2） 电磁成形理论与技术
（3） 粉末成形理论与技术

教育背景

2011/09-2015/03，法国国立应用科学学院，机械工程专业，博士
2008/09-2011/07，西北工业大学，航空宇航制造工程专业，硕博连读
2004/09-2008/07，沈阳航空航天大学，飞行器制造工程专业，学士


工作经历
2015/12-至今，武汉理工大学，材料科学与工程学院

项目情况
（1） 国家自然科学基金青年项目，2021/01-2023/12，主持
（2） 湖北省自然科学基金青年项目，2019/01-2020/12，主持
（3） 国家重点实验室开放基金重点项目，2021/01-2022/12，主持
（4） 国家重点实验室开放基金项目，2018/01-2019/12，主持
（5） 江苏省重点实验室开放基金项目，2017/11-2019/11，主持
（6） 国家自然科学基金面上项目，2015/01-2018/12，参加
（7） 国家高技术研究发展计划（863计划）项目，2008/10-2010/12，参加

代表性学术
成果
[1] Xiaoyong Zeng, Zhenghua Meng, Wei Liu*, Shangyu Huang, Shoulu Zhou, Yangzhe Lin, Electromagnetic forming of aluminum alloy strip by imposing inverse current instead of inducing eddy current, International Journal of Advanced Manufacturing Technology, (2020) 111:3481-3488
[2] Xiaoyong Zeng, Zhenghua Meng, Wei Liu*, Shangyu Huang, Shoulu Zhou, Yangzhe Lin, Deformation behaviour and damage evolution of aluminium alloy sheet in electromagnetic forming with uniform pressure actuator, International Journal of Advanced Manufacturing Technology, (2020) 109:745-754
[3] Wei Liu*, Xifan Zou, Yu Lei, Improving shape accuracy of aluminium alloy surface part in electromagnetically-assisted stamping, International Journal of Materials and Product Technology, 2020, 60(2/3/4):260-273
[4] Jie Zhu, Shangyu Huang, Wei Liu*, Jianhua Hu, Xifan Zou, Calibration of anisotropic yield function byintroducing plane strain test instead of equi-biaxial tensile test, Trans. Nonferrous Met. Soc. China 28(2018) 2307?2313
[5] Wei Liu, Xifan Zou, Shangyu Huang*, Yu Lei, Electromagnetic-assisted calibration for surface part of aluminum alloy with a dedicated uniform pressure coil，International Journal of Advanced Manufacturing Technology, (2019) 100:721-727
[6] Yu Lei, Shangyu Huang, Wei Liu*, Yong Xiao, Jianhua Hu, Xueming Du, Xifan Zou, Dissimilar Cu/Al tube joint by EMF-assisted brazing, International Journal of Advanced Manufacturing Technology (2018) 95:4039–4047
[7] Shiwei Yan, Shangyu Huang, Wei Liu*, Jianhua Hu, Yu Lei, Mengcheng Zhou, Experimental and numerical investigation of temperature evolution during electromagnetic pulsed compaction of powders, Powder Technology, 2017, 306:1-9
[8] Wei Liu, Dominique Guines*, Lionel Leotoing, Eric Ragneau, Identification of strain rate-dependent mechanical behaviour of DP600 under in-plane biaxial loadings, Materials Science & Engineering A, 2016, 676: 366–376
[9] Wei Liu, Dominique Guines*, Lionel Leotoing, Eric Ragneau, Identification of sheet metal hardening for large strains with an in-plane biaxial tensile test and a dedicated cross specimen, International Journal of Mechanical Sciences, 2015,101-102: 387–398



Ph.D. LIU Wei
Address: NO.122 Luoshi Road, Wuhan, Hubei, China
Email：weiliu@whut.edu.cn Tel: **






EDUCATION
2011/09-2015/03
National Institute of Applied Science (France), Mechanical Engineering
Ph.D.





2008/09-2011/07
NorthwesternPolytechnical University,
AerospaceManufacturing Engineering






2004/09-2008/07
Shenyang Aerospace University,
Aviation Manufacturing Engineering
B.S.









WORK EXPERIENCE
2015/12-Update

Wuhan University of Technology,
School of Materials Science and Engineering








RESEARCH PROJECT
2021/01-2023/12
National Natural Science Foundation of China

2021/01-2022/12
State Key Laboratory Open Fund Key Project

2019/01-2020/12
Natural Science Foundation of Hubei Province

2018/01-2019/12
State Key Laboratory Open Fund

2017/11-2019/11
Jiangsu Province Key Laboratory Open Fund

2015/01-2018/12
National Natural Science Foundation of China

2008/10-2010/12
National 863 Plan Project

SELECTED PUBLICATION
[1] Xiaoyong Zeng, Zhenghua Meng, Wei Liu*, Shangyu Huang, Shoulu Zhou, Yangzhe Lin, Electromagnetic forming of aluminum alloy strip by imposing inverse current instead of inducing eddy current, International Journal of Advanced Manufacturing Technology, (2020) 111:3481-3488
[2] Xiaoyong Zeng, Zhenghua Meng, Wei Liu*, Shangyu Huang, Shoulu Zhou, Yangzhe Lin, Deformation behaviour and damage evolution of aluminium alloy sheet in electromagnetic forming with uniform pressure actuator, International Journal of Advanced Manufacturing Technology, (2020) 109:745-754
[3] Wei Liu*, Xifan Zou, Yu Lei, Improving shape accuracy of aluminium alloy surface part in electromagnetically-assisted stamping, International Journal of Materials and Product Technology, 2020, 60(2/3/4):260-273
[4] Jie Zhu, Shangyu Huang, Wei Liu*, Jianhua Hu, Xifan Zou, Calibration of anisotropic yield function byintroducing plane strain test instead of equi-biaxial tensile test, Trans. Nonferrous Met. Soc. China 28(2018) 2307?2313
[5] Wei Liu, Xifan Zou, Shangyu Huang*, Yu Lei, Electromagnetic-assisted calibration for surface part of aluminum alloy with a dedicated uniform pressure coil，International Journal of Advanced Manufacturing Technology, (2019) 100:721-727
[6] Yu Lei, Shangyu Huang, Wei Liu*, Yong Xiao, Jianhua Hu, Xueming Du, Xifan Zou, Dissimilar Cu/Al tube joint by EMF-assisted brazing, International Journal of Advanced Manufacturing Technology (2018) 95:4039–4047
[7] Shiwei Yan, Shangyu Huang, Wei Liu*, Jianhua Hu, Yu Lei, Mengcheng Zhou, Experimental and numerical investigation of temperature evolution during electromagnetic pulsed compaction of powders, Powder Technology, 2017, 306:1-9
[8] Wei Liu, Dominique Guines*, Lionel Leotoing, Eric Ragneau, Identification of strain rate-dependent mechanical behaviour of DP600 under in-plane biaxial loadings, Materials Science & Engineering A, 2016, 676: 366–376
[9] Wei Liu, Dominique Guines*, Lionel Leotoing, Eric Ragneau, Identification of sheet metal hardening for large strains with an in-plane biaxial tensile test and a dedicated cross specimen, International Journal of Mechanical Sciences, 2015,101-102: 387–398

附件下载: