姓 名：陈培锋
职称：教授
专业方向：光电工程系
个人简介：

研究所（实验室）：激光科学系
职务：系主任
学习工作经历：
1978.9-1982.7 华中工学院光学工程系本科
1982.9-1985.6 华中理工大学光电子工程系研究生
1985.6- 华中科技大学工作，1996年获得工学博士学位，1997年晋升教授；历任华中科技大学激光研究院副院长、激光技术国家重点实验室新型激光研究室主任、华工激光工程有限公司首席科学家副总经理、华中科技大学温州先进制造技术研究院首席科学家等职务
长期从事激光物理、激光技术、激光光学、理论物理等课程教学，长期从事高功率高光束质量激光技术的研究，特别关注光束质量和光束形式的控制；研究特点是理论联系实际，多项基于专利技术的激光工业应用技术最终发展成为成熟的工业应用装备。
始终坚持：学问从问题展开求务实创新，项目不管大小高低唯求最好；教育围绕人进行应因人而异，学生无论南北东西只要努力。
研究方向、领域：
激光物理、激光光学
高功率激光工业应用技术
光电检测技术及应用
主要成果：
高功率高光束质量CO₂激光器及其应用装备
光束质量评估及光束衍射发散极限研究、高功率激光束控制技术
高速激光打孔、高速激光毛化技术及装备
大脉冲能量DPSS激光器及其应用
表面形貌等的光电检测
联系方式：
电话：**
Email:pfchen@mail.hust.edu.cn
办公地点：南五楼南103
CV:
Peifeng Chen
TitleDoctoral supervisor
Professor of opto-electronic
Phone: 55
Email: pfchen@mail.hust.edu.cn
Academic Areas:
Laser Physics Laser optics High Power Laser industrial application
Peifeng Chen is the Professor and Doctoral supervisor of optical science and technology at Huazhong Univ. of Sci. & Tech. His research spans Laser physics, Laser optics, high power Laser device and industrial engineering and photo-electronic testing technology. He focuses on questions such as: high power laser beam quality technology, Laser beam shaping and beam profile control. His work has been featured in a number of patents being transfer to the industrial device variety in the country. His teaching Course is warmly welcomed by the students and collected by the Chaoxing academic video data base.
Life philosophy:
Scholarship is Pragmatic innovation based on the problem solving;
Research project pursuits the best result no matter small or big;
Teaching differs from man to man as their character.
Enroll the students who make his efforts.
Academic Degrees
PhD in physical electronics, 1996, Huazhong Univ. of Sci. & Tech.
MS in physical electronics, 1986, Huazhong Univ. of Sci. & Tech.
BA Optical engineering, 1982, Huazhong Univ. of Sci. & Tech..
Professional Experience
Full Professor (2009-2014); Huazhong Univ. of Sci. & Tech.
Chief Scientist (2007-2009); Wenzhou research institute of advanced manufacturing technology of HUST.
Full Professor (2001-2006); Huazhong Univ. of Sci. & Tech.
Chief Scientist (2000-2001); Wuhan HuaGong Laser Engineering Co.,Ltd
Full Professor (1997-1999); Huazhong Univ. of Sci. & Tech.
Associate Professor (1987-1996); Huazhong Univ. of Sci. & Tech.,
Lecturer (1982-1986); Huazhong Univ. of Sci. & Tech.
Selected Publications
[1] Three-dimensional measuring technique for surface topography using a light-sectioning microscope. Appl. Opt., 2012, 51(8): 1162~1170
[2] Investigation of flexible perforation of thin materials using a continuous CO2 laser. Opt. Laser Technol., 2012, 44(6): 1641~1645
[3] A CO2 Laser Texturing Device Accomplished Through the Use of a Polygon Scanner for Beam Modulation. Lasers in Engineering, 2011,21(1-2):21-33
[4] “Investigation of CO2 laser beam modulation by rotating polygon,” Optics and Lasers in Engineering. 49(1)2011:132-136
[5] An Exploratory Investigation of Wide_Band Beam Shaping for High Power Laser Processing. Chinese Journal of Lasers , 2011,38(4):**-1--7
[6] “Power content M2-values smaller than one,” Applied Physics B-Lasers and Optics. 98(1),2010:181-185
[7] “Problems with power content beam parameter product,” Optics Communications. 283(4),2010:561-566
[8] Study and Practice on Multi Head Laser Texturing Technology Using Polygon Scanning for Beam Modulation, Chinese Journal of Lasers ,, 2009’ 36(1): 210-215
[9] Analysis of 90o off-axis parabolic mirror focal spot characteristic, ACTA OPTICA SINICA, 29(3),2009:682-687
[10] Novel Kind of Wide-Band Shaping Parabolic Mirror for High Power Laser Processing, Chinese Journal of Lasers, 35(11),2008:1853-1856
Selected Patent
CNA: Laser unstable resonator capable of outputting solid light beam and application of laser unstable resonator, 2014.02.19;
CNA: Optical fiber with ring-shaped doped layer and preparation method thereof and laser containing optical fiber, 2012.08.01;
CNA: Pulse laser beam combining method, 2012.08.01;
CNA: Laser generation method, YAG (yttrium aluminum garnet) laser and laser texturing processing device, 2011.06.15;
CNA: Rolling device of laser drilling machine for thin material, 2011.01.26;
CNA: Synchronous rolling device of thin material punching machine, 2011.01.26;
CNA: High-power Q-switching pulse laser rough processing device, 2011.05.11;
CNA: Double-head integrated laser drilling device for cigarette tipping paper, 2010.12.15
Awards and Honors
113 Talent plan of Huazhong Univ. of Sci. & Tech.
123 Talent plan of Hubei human resourse.
Courses Taught
**: Electrodynamics
**: Thermodynamics and Statistical Physics
230.504: Laser optics
Centers/Programs
[1] The research on the properities of Q switch fiber Laser
[2] High power, high energy solid state Laser
[3] The parameter measure system of DPL amplifier pumping model
[4] The technology of high quality Laser welding
[5] The phase detection model of fiber Laser coherent beam combiner
[6] High speed, high power laser drilling technology for cigarette tipping paper
[7] Laser texturing processing for cold-roll steel sheets
[8] Beam quality promoting technology of 500w solid state Laser