姓 名：李仁府
职 称：教授、博士生导师
电 话：
电子邮箱：renfu.li@hust.edu.cn








个人简介




李仁府（Renfu Li, Professor）, 男，1966年2月出生，江西丰城市。教授，博士生导师，航空航天学院 学术委员会主任。美国ASME Fellow，美国航空宇航AIAA Associate Fellow。
于1988年获北京航空航天大学飞行器设计学士；后获得佐治亚理工学院 航空宇航工程和数学科学双硕士学位、佐治亚理工学院航空宇航博士学位，并授予特优博士毕业生“Luther Long Award”奖。
于1988年7月到中航成飞机设计研究所从事先进飞行器研究。1997起先后在美国加州理工、佐治亚理工学院和航空宇航研究部门学习工作近十四年后回国到华中科技大学从事教学、科学研究和人才培养，以及航空航天学科和航空航天学院的创建工作。
担任多个学术机构的委员会委员，国际学术期刊AIAA Journal, Journal of Fluid Mechanics, Journal of Applied Mechanics, the International Journal of Solids and Structures, the International Journal of Non-linear mechanics, Carbon, Composite Science and Technology, Nanotechnology Reviews, IEEE Transactions on Cybernetics, IEEE Journal, Chinese Journal of Aeronautics等的审稿人；CJA等多个期刊编委。在国际知名期刊上发表了SCI学术论文一百多篇。




主要研究方向

新概念飞行器设计；空间智能机器人
飞行动力学及智能飞行控制；空-地-海多智能机器人协同与编队导航与控制
航天器/卫星轨道导航与控制
多功能航空复合结构及动力学；新能源动力推进



开设课程

《飞行器总体设计》、《航天航空概论》、《空气动力学》、《航天航空飞行器性能》、《飞行器动力学与飞行控制》、《航天器/卫星导航制导》



近期主持代表性项目

1."考虑**滑移**过程**耦合**和数据**"，**研究所，2020 – 2021（81.5万）
2."**人员**与工作区域**研究及*模拟仿真"，**研究所，2020–2021（90.5万）
3."**实验室二期"专项，****部队，2019–2021（824万）
4."**燃气发生器研制"，中航***，2017–2019（300万）
5."复杂环境宽速域运载器动态控制技术研究"，国家科技部科合作专项，2015–2018（192万）





近5年代表性论文（影响因子 IF > 4.00）

Chao Zhang, Renfu Li, Zhaojun Xi, Zhenhua Wan, Dejun Sun, (2020) “Effect of Mach number on the mode transition for supersonic cavity flows” Aero. Sci. and Techn. 106, 106101. (IF 4.499)
Zhang Jingyu, Yang Kai, Li Renfu.( 2020) “A bistable nonlinear electromagnetic actuator with elastic boundary for actuation performance improvement.” Nonlinear Dyna., 100: 3575–3596. （IF 4.86）
Xianrong Huang, Renfu Li, Lijian Zeng, Xueling Li, Zhaojun Xi, Kun Wang, Yichao Li, ( 2020 ) "A multifunctional carbon nanotube reinforced nanocomposite modified via soy protein isolate: A study on dispersion, electrical and mechanical properties," Carbon, Vol. 161, pp 350-358. （IF 8.821）
Xueling Li, Huawei Chang, Lijian Zeng, Xianrong Huang, Yichao Li, Renfu Li, Zhaojun Xi,（2020）”Numerical analysis of photothermal conversion performance of MXene nanofluid in direct absorption solar collectors,” Energy Conv. and Manag., 226, 2020, 113515. (IF 8.208)
Jiliang Zheng, Renfu Li, Weihong Zhong, Yichao Li, (2020). “A bio-OCLC structure equating to a movable unit of a lattice cellular core for hybrid in-plane morphing application.” Comp. Struct., Vol.235. doi: 10.1016. (IF 5.138)
Yuanyuan Zhang, Renfu Li, Guanrong. Chen, (2019.) “Consensus control of second-order time-delayed multiagent systems in noisy environments using absolute velocity and relative position measurements.” IEEE Transactions on Cybernetics DOI: 10.1109/TCYB.2019.295462. (IF 11.079)
Jiliang Zheng, Renfu Li, Weihong Zhong, Yichao Li, (2019)"A bio-OCLC structure equating to a movable unit of a lattice cellular core for hybrid in-plane morphing applications." Comp. Struct.. 235:111762. doi:org/10.1016 (IF 5.138)
Yuanyuan Zhang, Renfu Li, Xiaoming Huo. (2019) “Switching-dominated stability of numerical solutions for hybrid neutral stochastic differential delay equations.” Nonlinear Anal.: Hybrid Systems 33:76-72. (IF 5.881)
Yichao Li, Xuewei Fu, Yu Wang, Wei-Hong Zhong, Renfu Li, (2019) “See" the invisibles: Inspecting battery separator defects via pressure drop,” Energy Storage Mat.,16: 589-596. (IF 16.280)
Yuanyuan Zhang, Renfu Li, Xiaomin Huo, (2018) “Stochastic consensus of discrete-time second-order multi-agent systems with measurement noises and time delays, ”J. of the Frank. Inst., vol.355, pp. 2791-2807. (IF 4.036)
Lin Hu, Renfu Li, Tao Xue, Yifang Liu, (2018) “Neuro-adaptive Tracking Control of a Hypersonic Flight Vehicle with Uncertainties using Reinforcement Synthesis,” Neuro Computing, vol.285, pp 141-153. (IF 4.438),
Yang Hu, Renfu Li, Yuanyuan Zhang, (2018) “Predicting pilot behavior during midair encounters using recognition primed decision model,” Inform. Sci. (IF 5.910) vol.422, pp.377-395.
Lin Zhou, Renfu Li, Z. Hao, D.I. Zaripov, C. Yan, (2018) “Improved k-ω-γ model for cross flow-induced transition prediction in hypersonic flow”, Intern. J. of Heat and Mass Trans., vol.115, pp.115-130. (IF 4.947)
Yichao Li, Renfu Li, Xuewei Fu, Yu Wang, Wei-Hong Zhong, (2018) “A bio-surfactant for defect control: multifunctional gelatin coated MWCNTs for conductive epoxy nano composites”, Comp. Sci. and Tech., vol.159, pp.216-224. (IF 7.094)
Yuanyuan Zhang，Li, RF,Zhao, W,Huo, XM,(2018) “Stochastic leader-following consensus of multi-agent systems with measurement noises and communication time-delays”, Neuro Comput., vol.282, pp. 136-145. (IF 4.438)
Yichao Li, Tao Xue, Renfu Li, Xianrong Huang, Lijian Zeng, (2018) “ Influence of a fiberglass layer on the lightning strike damage response of CFRP laminates in the dry and hygrothermal environments,” Comp. Struc., vol.187, pp. 179-189. (IF 5.138)
Lin Zhou, R. Zhao, Renfu Li, (2018) “A combined criteria-based method for hypersonic three-dimensional boundary layer transition prediction,” Aero. Sci. and Techn., vol.73, pp.105-117. (IF 4.499)
Wei Zhao, Renfu Li, Huaipin Zhang, (2017) “Leader-follower Optimal Coordination Tracking Control for Multi-agent Systems with Unknown Internal States,” Neuro-comput., 249C 171-181. (IF 4.438)
Yuanyuan Zhang, Renfu Li, Tao Xue, Zhimin Liu, Zongxin Yao, (2016)" An Analysis of the Stability and Chattering Reduction of High-order Sliding Mode Tracking Control for a Hypersonic Vehicle ", Inform. Sci., DOI: 10.1016. (IF 5.910)
Yichao Li, Renfu Li, Lai Huang, Kun Wang, Xianrong Huang. (2016) “Effect of hygrothermal aging on the damage characteristics of carbon woven fabric/epoxy laminates subjected to simulated lightning strike” Mat. & Design, 99: 477-489. (IF 6.289)
Zhang, Yuanyuan, Renfu Li, Tao Xue, and Zhikun Lei. (2016) "Exponential sliding mode tracking control via back-stepping approach for a hypersonic vehicle with mismatched uncertainty." J. of the Frank. Inst. (IF 4.036).
Yuanyuan Zhang, Renfu Li, Tao Xue, Zhimin Liu, Zongxin Yao, (2016) " An Analysis of the Stability and Chattering Reduction of High-order Sliding Mode Tracking Control for a Hypersonic Vehicle ", Inform. Sci. DOI: 10.1016 (IF 5.910)
Dapeng Hu, Renfu Li, Peiqi Liu, Jiaquan Zhao, (2016) “The loss in charge process and effects on performance of wave rotor refrigerator.” Intern. J. of Heat and Mass Transf. Vol. 100, 497–507. (IF 4.947)
Yichao Li, Renfu Li, Luyi Lu, Xianrong Huang, (2015) “Experimental study of damage characteristics of carbon woven fabric/epoxy laminates subjected to lightning strike”. Comp. A, 79: 164-175. (IF 6.444)
Zhikun Lei, Renfu Li, Xuelei Ni, and Xiaoming Huo, (2015) “High-dimensional semi-supervised learning via a fusion-refinement procedure” Sign. Proc.,vol.114, pp.171–182. (IF 4.384)
YC Li, Renfu Li, Lvyi Lu,Xianrong Huang, (2015) “Experimental study of damage characteristics of carbon woven fabric/epoxy laminates subjected to lightning strike” Comp. A 79, 164-175. (IF 6.444)
XR Zhu, Renfu Li , DG Li , P Zhang and RZ Qian, (2015) “Experimental Study and RANS Calculation on Velocity and Temperature of a Kerosene-fueled Swirl Laboratory Combustor With and Without Center body” Intern. J. of Heat Mass Transf., 0017-9310. (IF 4.947)

近3年国际会议


Conference Co-Chair, “12th International Conference on Mechanical and Aerospace Engineering”, July, 2021, Athens, Greece.
Conference Co-Chair, “IEEE The 3rd International Conference on Electronics Technology” May, 2020. Chengdu, China.
Conference Chair of the “International Conference of Control and System-IEEE ”, August of 2018, Wuhan， China .




近5年专利
“A novel power system for an vertical takeoff fixed wing uva,” Applicant: Renfu Li, Xingguo Lei, Xuefeng Li, Patent No. CN6.5, 2020.03.16
“A bistable nonlinear energy harvester based on elastic lever,” Applicant: Kai Yang, Kewei Su, TianQiu, Renfu Li, Patent No. CN4.2, 2019.2.22
“Protein – nano carbon fiber/ composites and its fabrication method,” Applicant: Yichao Li, Lijian Zeng, Renfu Li, Weihong Zhong, Patent No. CN7.3, 2019.5.20.
“A test bed for the aero-engine Low pressure turbine stator blade impact and rubbing,” Applicant: Kun Wang, Xingguo Lei, Renfu Li, Patent No. ZL1.X, 2019.11.22.
“A high efficient system for recycling energy from internal combustion engine exhaust gas,” Applicant: Renfu Li, Xinguo Li, Patent No.ZL1.6, 2019.11.04.
“A Power and energy method based on variable fan and ram jet”, Applicant: Renfu Li, Xingguo Lei, PatentNo. ZL2.2 2018.05.28.
“A novel type of turbo-shaft Engine”, Applicant: Renfu Li, Xingguo Lei, Youde Xiong, Patent No. ZL3.X 2018.05.28.
“A flame stabilizer for a combustion chamber”, Applicant: Renfu Li, et al, Patent No: 1.5, 2015.8.3.
“A Multi - functional Combustion Chamber Experiment System Suitable for Gas Turbine”, Applicant: Renfu Li, Zaihua Wang, Liuhao Ma, Dachao Lian, Hui Zhou, Lun Cai, Patent No: 2015 2 **.7, 2015.12.16,
“A lean based multi - point combustor on a slotted cyclone”, Applicant: Renfu Li, Hongren Li, Huapeng Wu, Boshu Li, Patent No: 0.9, 2015.9.2,
“A flame stabilizer for a combustion chamber and combustion”, Applicant: Renfu Li, Zaihua Wang, Liuhao Ma, Jianfeng Zhao, Boshu Li, Patent No: 1.5, 2016.3.2
“A rocket launcher with adjustable firing angle”, Applicant: Renfu Li, Hongren Li, Zaihua Wang, Huapeng Wu, Liuhao Ma, Boshu Li, Patent No: 5.4, 2015.9.16.
“A rocket rudder chamber”, Applicant: Renfu Li, Yang Hu, Zaihua Wang, Lun Cai, Huapeng Wu, Liuhao Ma Patent No: 0.8, 2015.11.11.
“A Combustion Chamber of Single - chamber and Dual - thrust Solid Rocket Motor”, Applicant: Renfu Li, Hongren Li, Zaihua Wang, Huapeng Wu, Liuhao Ma, Boshu Li, Xiangqing Li, Patent No: 2015 2 0144 846.2, 2015.7.22.
“A Single - chamber Dual - thrust Solid Rocket Motor Combustion Chamber”, Applicant: Renfu Li, et al, Patent No: 2015 2 **.2，2015.3.13.
“An Unmanned Target Drilling Machine Based on Wave - body Configuration”, Applicant: Renfu Li, et al, Patent No: 0.6，2015.6.29.