姓名：张兴伟
职称：副教授


教育背景

2011 年11月于 哈尔滨工业大学 获得 流体机械及工程 专业 工学博士 学位, 被评为2011年哈尔滨工业大学优秀博士毕业生
2006年9月于 哈尔滨工业大学 获得 机械电子工程 专业 工学硕士学位
2003年9月于 哈尔滨工业大学 获得 热能与动力工程 专业 工学学士 学位
部分曾参与项目
(1)微型扑动飞行器的设计与研究. 项目编号：SY1A/CY.
(2) F型垂直轴风力发电机的设计（隶属于国家自然科学基金重大研究计划重点项目）.项目编号：**-1.
(3)再入飞行器系统的设计与研究
开设课程
液压传动 材料力学等.
兴趣研究方向
风力机的气动特性分析及设计
绕流减阻及流动控制研究
超声速,高超声速飞行器绕流特性分析
仿生扑翼微型飞行器设计及其气动特性研究
近期发表论文
[1] Xingwei Zhang, Chaoying Zhou. Numerical Investigation on the Aerodynamic Characteristics of a Forward Flight Flapping Airfoil with Nonsymmetrical Plunging Motion. Information Technology Journal, 2010,10(4)：748-758. (EI收录号：141)
[2] Xingwei Zhang, Chaoying Zhou. Computational Study on the Hovering Mechanisms of a Chordwise Flexible Wing. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering.2012,226(1)：3-14. (SCI, EI)
[3] Xingwei Zhang, Chaoying Zhou. Numerical Investigation on the Propulsive Efficiency of Flapping Airfoil with Different Up-down Plunge Models. 27th Congress of the International Council of the Aeronautical Sciences, Nice, France, 2010.
[4] Xingwei Zhang, Chaoying Zhou. The Flow Field Characters of a Two-dimensional Deformable Wing Heaving in a Viscous Flow. (EI收录号：044)
[5] Xingwei Zhang, Chaoying Zhou. Numerical Study on the Effect of Trajectory Pattern on Hovering Flight. (EI收录号：047)
[6] 张兴伟，周超英,谢鹏. 扑翼柔性变形对悬停气动特性影响的数值研究[J]。哈尔滨工业大学学报2012,44(1):115-119. ((EI收录号: 970).
[7] Xingwei Zhang, Chaoying Zhou. Numerical Calculation on Vortex-induced Vibration of the Circular Cylinder Using Low Reynolds Model in Hybrid Method. (EI收录号：129,ISTP)
[8] Chao Wang, Chaoying Zhou, Xingwei Zhang, et al. An Optimization on Single-crank-double-rocker Flapping Wing Mechanism. (EI收录号：171)
[9] Tao Zhang, Chaoying Zhou, Chao Wang, Xingwei Zhang. Flapping Wing Mechanism Design Based on Mechanical Creative Design Theory. (EI收录号：201**)
[10] Tao Zhang, Chaoying Zhou, Xingwei Zhang, Chao Wang. Design, Analysis, Optimization and Fabrication of a Flapping Wing MAV. (EI收录号：201**)
[11] Peng Xie, Chaoying Zhou, Xingwei Zhang, et al. Forces and Pressure Investigation of Steady and Oscillating Cables with Rivulets via Numerical Method. (EI)
[12] Chaoying Zhou, Wenying Ji, Xingwei Zhang. A Numerical Investigation on Reduction of Fluid Force on Three-dimensional Circular Cylinder with Tripping Rods. Applied Mechanics and Materials, 2011, 105-107：139-142. (EI收录号: 201**)
[13]Hang Liu, Hong Hu, Xingwei Zhang. Fabrication of plastic micro features on microporous mold by hot embossing. Applied Mechanics and Materials. Vol.58-60,pp822-826, 2011(EI收录号：830)
[14] 周超英，纪文英，张兴伟, 邓立君. 球头体逆向喷流减阻的数值模拟研究。2012，工程力学。
[15]纪文英，周超英，张兴伟，邓立君. 超声速钝体逆向喷流减租的数值模拟研究. 应用力学,2012,29(2):159-164.
教育背景
工作背景
科研项目尾流干扰下提升风机发电效率的试验研究
沿海气候条件下中小型风力机检测与认证技术研究
基于FMAV的低雷诺数下扑翼飞行气动特性及翼的柔性机制影响研究
可用于大跨度桥梁涡振控制的风力机开发
新型高刚度混联构型机床设计方法与虚拟样机技术
磁流体多相流交界面相互干扰及传热改善机理研究
面向多样化需求的开放式结构产品可适应设计
开放式超冗余仿生象鼻机器人设计方法与性能保证技术
仿生微型扑翼飞行器气动特性及扑动控制问题研究
机电一体化系统的智能设计框架及其应用研究
仿生微型飞行器扑动翼气动特征的分析和设计
扑动翼微型飞行器的气动特性研究
仿生扑翼机在复杂环境下的气动特性及主动调节方法仿生机理研究
科研论文Study on a supercritical CO2 solar water heater system induced by the natural circulation
Optimization design and dynamic analysis on the drive mechanisms of flapping-wing air vehicles based on flapping trajectories
A study on the aerodynamic characteristics of airfoil in the flapping adjustment stage during forward flight
Numerical study on the aerodynamic characteristics of both static and flapping wing with attachments
Performance analyses of a particularly designed turbine for a supercritical CO2-based solar Rankine cycle system
Numerical Investigation of “Frog-Leap” Mechanisms of Three Particles Aligned Moving in an Inclined Channel Flow
Numerical Investigation of ”Frog-Leap” Mechanisms of Three Particles Aligned Moving in an Inclined Channel Flow
Design and Development of a Course in Professionalism and Ethics for CDIO Curriculum in China
格子Boltzmann方法分析气泡的运动及其相互作用
Bubble Motion and Interaction under Buoyancy by Lattice Boltzmann Method
Dynamic Characteristics of Three Particles Aligned Movement In An Inclined Channel
三圆形颗粒在通道中沉降运动的数值研究
嵌入式系统教学中学生能力提升探索_叶玮琳
风力机大型化发展中的总体设计技术
numerical investigation of motion characteristics of three particles aligned movement in an inclined channel by IBLBM
SIMULATION OF BUBBLES MOTION UNDER BUOYANCY BY LATTICE BOLTZMANN METHOD
THE EFFECT OF VORTEX GENERATOR ON AERODYNAMIC CHARACTERISTICS OF THE WIND TURBINE AIRFOIL
Modelling and Robust Control of splicing system
A conceptual model of flapping-wing mechanism inspired from the results of numerical study
单一涡街对方形柱体流场影响研究
多个湍流模型下叶片涡流发生器的计算研究
多个湍流模型下叶片涡流发生器的计算研究
探究之策——应用类课程探究式教学之思考
Melt Pressure Signature Tracking Using an Adaptive Kalman Filter in Microinjection Molding
Numerical study on effect of leading-edge tubercles
球头体逆向喷流减阻的数值模拟研究
科研成果