白家鸣

助理教授
智能制造创新中心
E-mail:baijm@sustc.edu.cn
个人主页


研究领域
增材制造及 3D 打印
3D 打印，特别是选择性激光烧结（SLS）技术的新材料研发和过程优化
功能化高分子纳米复合材料在3D打印中的应用（4D Printing）
航空航天、汽车，模具、生物医疗等领域3D打印技术应用
教育经历
2013 英国拉夫堡大学 机械与制造工程 博士
2009 英国拉夫堡大学 工业材料 硕士
2008 北京化工大学 高分子材料与工程 本科
工作经历
2014 - 至今 新加坡制造技术研究院 博士后研究员
2013 - 2014 英国诺丁汉大学 国家创新及3D打印研究中心 博士后
2009 - 2013 英国拉夫堡大学 博士研究员
2012 日本国立材料研究所 访问****
2012 丰田工业大学 研究****
所获荣誉
2015 新加坡科技局 Leading, Educating & Nurturing Talent' (TALENT) Award
2011 英国 SASAKAWA 基金
2007-2009 英国拉夫堡-中国材料奖学金
代表文章
Bai, J., et al, The effect of processing conditions on the mechanical properties of polyethylene produced by selective laser sintering, Polymer Testing, 52, 89-93, 2016
Yuan, S.; Bai, J.; Chua, C.K.; et al, Highly enhanced thermal conductivity of thermoplastic nanocomposites with a low mass fraction of MWCNTs by a facilitated latex approach, Composite Part A, 90, 699-710, 2016
Yuan, S.; Bai, J.; Chua, C.K.; et al, “Characterization of creeping and shape memory effect in laser sintered thermoplastic polyurethane,” Journal of Computing and Information Science in Engineering, doi:10.1115/1.**, 2016
Liu, M., Xu, W., Bai, J., et al, Investigation of the size effect for photonic crystals, Nanotechnology, 27, 40, 2016
Yuan, S.; Bai, J.; Chua, C.K.; et al, Evaluation and optimization of CNTs-coated polymer powders for selective laser sintering, Polymers, 8(10), 370, 2016
Song, J; Bai, J., Zhou Y, Intraluminal Bubble Dynamics Induced by Lithotripsy Shock Wave, Journal of Physics D: Applied Physics, Accepted, 2016
Zhang, B., Bi, G., Wang, P., Bai, J., et al, Microstructure and mechanical properties of Inconel 625/nano-TiB2 composite fabricated by LAAM, Materials and Design, 111, 70–79, 2016
Bai, J., et al, “Thermal Influence of CNT on the Polyamide 12 Nanocomposite for Selective Laser Sintering”, Molecules, 20, 10: 19041-19050, 2015
Bai, J., et al ,“Effect of surface orientation on the tribological properties of laser sintered polyamide 12”, Polymer Testing, 48, 111–114, 2015
Bai, J. et al, “Processing and characterization of a polylactic acid/nanoclay composite for laser sintering”, Polymer Composites, DOI: 10.1002/pc.23848, 2015
Bai, J., et al, “Nanostructural Characterization of Carbon Nanotubes in Laser-sintered Polyamide 12 by 3D-TEM”, Materials Research, 29, 1817-1823, 2014
Bai, J., et al, Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sintering, Polymer Testing, 36, 95-100, 2014
Bai, J., et al, Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes, Polymer Engineering & Science, 53(9), 1937-1946, 2013
Bai, J., et al, Carbon nanotube reinforced Polyamide 12 nano-composites for laser sintering, Twenty Third Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference,