福州大学先进制造学院导师教师师资介绍简介-汪炳叔

删除或更新信息，请邮件至freekaoyan#163.com(#换成@)

本站小编 Free考研考试/2021-05-11

汪炳叔
性别男
系别先进材料系，智能制造系
学位博士
职称副教授
职务院长助理

详细信息

联系方式
通讯地址：福建省晋江市金井镇水城路1号福州大学先进制造学院
邮编：362200
Email：bswang@fzu.edu.cn
QQ：120443

主要学历及工作经历
2000.09-2004.06 重庆大学，材料科学与工程学院，本科
2006.09-2012.06 重庆大学，材料科学与工程学院，博士
2012.08-2016.06 福州大学，材料科学与工程学院，讲师
2016.06-至今福州大学，材料科学与工程学院，副教授
2020.08-至今福州大学，先进制造学院，院长助理

主要学术及社会兼职
国家自然科学基金通讯评审专家
中国机械工程学会材料分会委员会委员
中国电子显微镜学会扫描电镜（EBSD）专业委员会委员
福建省电镜学会理事
《材料工程》、《航空材料学报》青年编委

研究领域
微观组织及织构表征技术（EBSD，TEM）
金属材料（镁合金、钛合金、铜合金、ODS钢等）塑性变形机理
金属材料加工过程微观组织与织构控制技术
镁/钛合金孪晶及相变晶体学计算
晶体塑性模拟（VPSC）

承担科研课题情况
主持项目：
中国博士后科学基金一等资助项目，2017-2019，在研，主持
福建省自然科学基金面上项目，2016J01215，基于多向变形的镁合金孪生变体选择机制研究，2016-2019，已结题，主持
国家自然科学基金青年项目，**，基于室温多向高速预变形的镁合金微观组织及织构演变规律研究，2014-2016，已结题，主持
中国工程物理研究院合作项目，低熔点金属形变及热处理行为研究，2020-2022，在研，主持
参与项目：
国家自然科学基金面上项目，高强韧CNTs/Al复合材料仿生构型设计与制备基础研究，2019-2022, 在研，参与
国家自然科学基金青年项目，**，Cu-Nb微观复合线材的界面行为研究，2017-2019，在研，参与
国家自然科学基金重点项目，**，时效镁合金的沉淀析出与强韧化机理研究，2012-2016，已结题，参与

出版著作和论文
部分研究成果已在Acta Materialia、Scripta Materialia、Materials Science and Engineering A、Materials & Design、Materials Characterization等国际学术期刊上发表。迄今为止，已发表论文30余篇，其中SCI收录27篇。已获授权国家发明专利2项。
1.Peng Ye, Jinyi Yao,Bingshu Wang*, Huimin Liu, Liping Deng, Chen Wang, Junfeng Chen, Qiang Li. A comparative study between {11?22} twinning and {10?12} twinning variant selection mechanisms during uniaxial compression in pure titanium,Materials Characterization, 2020, 162: 110-118.
2.Mingxue Zhang, Liping Deng,Bingshu Wang,Hongliang Xiang, Effect of torsional rate on the gradient microstructure, texture evolutions and microhardness of pure copper,Materials Characterization, 2020, 161: 110-141.
3.Bingshu Wang*, Jingjing Shi, Peng Ye, Liping Deng, Ning Guo, Chen Wang, Junfeng Chen, Qiang Li. Analysis of {10–12} twinning variants’ selection behavior during multi-directional compression in Mg–3Al–1Zn magnesium alloy.Journal of Materials Science, 2019, 55(13):9797-9808.
4.邓丽萍, 崔凯旋，汪炳叔*,等. AZ31镁合金室温多道次压缩过程微观组织和织构演变的研究.金属学报.. 2019, 55(8):976-985.
5.Liping Deng,Bingshu Wang, Ke Han, Rongmei Niu, Hongliang Xiang, Karl T. Hartwig, Xiaofang Yang, Response of microstructure to annealing in in situ Cu–Nb microcomposite,Journal of Materials Science,2019, 54: 840-850
6.Zhimin Zhang, Qingshan Dong, Bo Song, Hong He, Linjiang Chai, Ning Guo,Bingshu Wangand Zhongwen Yao, Effect of Shear Strain Rate on Microstructure and Properties of Austenitic Steel Processed by Cyclic Forward/Reverse Torsion,Materials,2019, 12: 506
7.Bingshu Wang*, Jingjing Shi, Peng Ye, Liping Deng, Chen Wang, Junfeng Chen, Xiaohua Yang, Qiang Li, In-situ investigation on nucleation and propagation of {10-12} twins during uniaxial multi-pass compression in an extruded AZ31 Mg alloy,Materials Science and Engineering: A, 2018, 731: 71-79
8.Jingjing Shi, Kaixuan Cui,Bingshu Wang*, Liping Deng, Chen Wang, Zeren Xu, Qiang Li, Effect of Initial Microstructure on Static Recrystallization of Mg-3Al-1Zn Alloy,Materials Characterization, 2017, 129: 104-113
9.Chen Wang, Hao Ding,BingShu Wang*, Kui Wang, Jingjing Shi, Junfeng Chen, Effects of deformation texture and twins on the corrosion resistance of rolled AZ31 Mg alloy under 5% uniaxial compression, Acta Metallurgica Sinica, 2017, 30: 921-930
10.Deng LIping,Wang Bingshu, Xiang Hongliang, Yang Xiaofang, Ke Han. Effect of Annealing on the Microstructure and Properties of in-situ Cu–Nb Microcomposite Wires.Acta Metallurgica Sinica. 2016; 29: 668-673
11.Guo Ning, Song Bo, Yu Hongbing, Xin Rrelong,Wang Bingshu, Liu Tingting. Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation.Materials & Design.2016; 90:545-550.
12.Deng Liping, Han Ke,Wang Bingshu, Yang Xiaofang, Liu Qing. Thermal stability of Cu-Nb microcomposite wires.Acta Materialia.2015, 101:181-188
13.汪炳叔*,邓丽萍, Adrien Chapuis, 郭宁, 李强. AZ31镁合金在平面应变压缩过程中的孪生行为研究.金属学报.. 2015, 51(12):1441-1448
14.Yao Jinyi,Wang Bingshu*,Deng Liping, Adrien Chapuis, Li Qiang and Liu Qing. Simulation of texture evolution and deformation mechanism in Mg-3Al-1Zn alloy during uniaxial compression.Science China Technological Sciences.2015: 58(12): 2052-2059
15.Wang Bingshu*,Deng Liping, Adrien Chapuis, Guo Ning, Xu Zeren and Li Qiang. Relationship between textures and deformation modes in Mg–3Al–1Zn alloy during uniaxial tension.Materials Characterization.2015; 108: 42-50
16.Xin Renlong, Liang Yingchun, Ding Changhong, Guo Changfa,Wang Bingshu,Liu Qing. Geometrical compatibility factor analysis of paired extension twins in extruded Mg–3Al–1Zn alloys.Materials & Design.2015; 86: 656-663
17.Guo Ning, Song Bo, Wang Bing-Shu and Liu Qing. Influence of Torsion Deformation on Textures of Cold Drawing Pearlitic Steel Wires.Acta Metallurgica Sinica. 2015; 28: 707-714
18.Wang Bingshu*, Deng Liping, Guo Ning, Xu Zeren and Li Qiang. EBSD analysis of {10–12} twinning activity in Mg–3Al–1Zn alloy during compression.Materials Characterization.2014; 98: 180-185
19.Guo Ning, Liu Tingting, Luan Baifeng,Wang Bingshuand Liu Qing. Dislocation density and configuration in fully pearlitic steel during wire drawing.Materials Research Innovations. 2014; 18: s249-254
20.Chapuis Adrien,Wang Bingshuand Liu Qing. A comparative study between uniaxial compression and plane strain compression of Mg–3Al–1Zn alloy using experiments and simulations.Materials Science and Engineering: A. 2014; 597: 349-358
21.Guo Ning, Luan Baifeng,Wang Bingshuand Liu Qing. Microstructure and texture evolution in fully pearlitic steel during wire drawing,Science China-Technological Sciences, 2013. 56(5): 1139-1146.
22.Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Strain rate and texture effects on microstructural characteristics of Mg-3Al-1Zn Mg alloy during compression.Scripta Materialia.2012. 66 (5): 239-242.
23.Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression.Materials Science and Engineering A,2012. 534:588-593.
24.Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Hot-deformation behaviors of AZ31 alloys with different initial states.Transactions of Nonferrous Metals Society of China.2008. 18: 145-149.
25.Xin Renlong,Wang Bingshu,Huang Guangjie and Liu Qing. Effects of strain rate and temperature on microstructure and texture for AZ31 during uniaxial compression.Transactions of Nonferrous Metals Society of China. 2010. 20：594-598.
26.Xin Renlong,Wang Bingshu, Huang Guangjie and Liu Qing. Examination of dynamic recrystallization during compression of AZ31 magnesium.Science in China Series E-Technological Sciences. 2009. 52: 176-179.
27.M.Y. Wang, Xin Renlong,Wang Bingshuand Liu Qing. Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling.Materials Science and Engineering A.2011, 528: 2941–2951.

获奖情况
2016年获得福州大学2015-2016学年教学优秀奖三等奖
2017年获得福州大学第二届“阳光奖教金”奖
2019年获得福州大学2018-2019学年教学优秀奖三等奖
2019年获得福州大学第一届“曾亦容奖教金”奖
2020年获得福州大学优秀教学管理人员称号

指导硕士生研究方向
1、金属材料（镁合金、钛合金、铜合金、ODS钢等）塑性加工过程微观组织与织构控制技术
2、金属材料塑性变形强韧化机理
3、镁/钛合金孪晶及相变晶体学计算和晶体塑性模拟（VPSC）

返回列表