邱信明（QIU Xinming） 教授，博士生导师
电话：+86
传真：+86
E-mail： qxm@tsinghua.edu.cn
办公地址：逸夫技术科学楼1309
邮编：100084
教育背景1992-2002年，清华大学工程力学系
1997、2002年获学士和博士学位。
工作履历2002-2004年，英国剑桥大学工程系细观力学中心，博士后。
2004年9月-至今，清华大学航天航空学院
2008年2月-2008年9月、2010年2月-2010年6月，香港科技大学机械工程系交流合作
研究领域目前研究方向侧重于轻质结构的力学性能研究，结构的动态响应，非线性断裂力学的理论分析和数值模拟仿真。
研究概况曾主持国家自然科学基金项目2项，作为骨干参与973重点项目2项，参与XXXX预研基金1项，作为成员参与国家自然科学基金项目2项。
奖励与荣誉1、入选2007年清华大学骨干人才计划
2、2009年度清华大学学术新人奖
3、2010年度清华大学青年教师教学优秀奖
学术成果至2010年9月，已发表学术论文43篇，其中SCI收录31篇，在SCI网络版中被他引用283次。部分论文如下：
1.Qiu X, Zhang J, Yu TX, (2009). Collapse of periodic planar lattices under uniaxial compression, part I: quasi-static strength predicted by limit analysis. Int. J. Impct. Engng., 36, 1223–1230
2.Qiu X, Zhang J, Yu TX, (2009). Collapse of periodic planar lattices under uniaxial compression, part II: dynamic crushing based on finite element simulation. Int. J. Impct. Engng., 36, 1231-1241
3.Qiu X, He L, Qian Y, Zhang X. (2009) The plastic zone of semi-infinite crack in planar Kagome and triangular lattices. Acta Mechanica Solida Sinca, 22(3)
4.Li Y, Qiu X, Yin YJ, Yang F and Fan QS. (2009) The specific heat of carbon nanotube networks and their potential applications, J. Phys. D: Appl. Phys., 42, 155405(6pp)
5.Li Y, Qiu X, Yang F, Yin YJ, Fan QS. (2009) Stretching-dominated deformation mechanism in a super square carbon nanotube network. Carbon, 47(3): 812-819.
6.Ma S, Zhang X, Qiu X. (2009) Comparison study of MPM and SPH in modeling hypervelocity impact problems. Int. J. Impct. Engng., 36(2): 272-282.
7.钱岳强，邱信明，张雄. （2008）Kagome平面格栅结构裂纹尖端场的塑性区，力学学报，40(6)，826-833
8.Yang F, Qiu X, Li Y, Yin Y, Fan Q. (2008) Specific heat of super carbon nanotube and its chirality independence. Physics Letters A. 372: 6960–6964.
9.Li Y, Qiu X, Yang F, Yin Y and Fan Q. (2008) Chirality independence in critical buckling forces of super carbon nanotubes. Solid State Communications. 148, 63-68.
10.Li Y, Qiu X, Yang F, Wang X-S, Yin Y-J, Fan Q-S. (2008) A comprehensive study on the mechanical properties of super carbon nanotubes. J.Phys D: App. Phys., 41, 155423(6pp)
11.Li Y, Qiu X, Yang F, Wang X and Yin Y. (2008) The effective modulus of super carbon nanotubes predicted by molecular structure mechanics. Nanotechnology, 19, 225701 (7pp).
12.Li Y, Qiu X, Yang F, Wang X and Yin Y. (2008) Ultra-high Sensitivity of Super Carbon nanotube based Mass and Strain Sensors. Nanotechnology, 19,165502 (6pp).
13.Zhang, YH; Qiu, X; Fang, DN. (2008) Mechanical properties of 2-D lattice materials. Advances in Fracture and Materials Behavior, 33-37, 585-590.
14.Zhang Y, Xue Z, Qiu X, Fang D. (2008) Plastic yield and collapse mechanism of planar lattice structures. Journal of Mechanics of Materials and Structures, 3(7), 1257-1277.
15.Zhang Y, Gu Y, Qiu X, Guo H, Zhao H, Fang D. (2008) Vibration and buckling of lattice sandwich structures. Inernational Journal of Nonlinear Sciences and Numerical Simulation, 9(1), 41-46.
16.Zhang Y, Qiu X and Fang D. (2008) Mechanical Properties of two Novel Planar Lattice Structures. International Journal of Solids and Structures, 45(13), 3751-3768.
17.Yin Y, Zhang T, Yang F, Qiu X. (2008) Geometric conditions for fractal super carbon nanotubes with strict self-similarities. Chaos, Solitons and Fractals. 37(5), 1257-1266.
18.Wang M, Qiu X, Zhang X and Yin Y. (2007) Equivalent Parameters Study of Super Carbon Nanotubes’ Mechanical Properties. Nanotechnology, 18, 295708 (6pp).
19.Fleck N A and Qiu X. (2007) The Damage Tolerance of Elastic–brittle, Two-dimensional Isotropic Lattices. J. Mech. Phys. Solids，55(3), 562-588.
20.Wang M, Qiu X and Zhang X (2007). Mechanical Properties of Super Honeycomb Structures Based on Carbon Nanotubes. Nanotechnology. 18, 75711 (6pp).
21.Guo H, Qiu X and Fang D. (2006) Optimal Design of Two Lattice Materials and Their Effective Properties. Int. J. Nonlinear Sciences and Numerical Simulation, 7(4), 93-398.
22.马上，张雄，邱信明. (2006) 超高速碰撞问题的三维物质点法. 爆炸与冲击，26(3):273-278.
23.Qiu X, Deshpande V S and Fleck N A. (2005) Impulsive Loading of Clamped Monolithic and Sandwich Beam over a Central Patch. J. Mech. Phys. Solids, 53, 1015-1046.
24.Qiu X, Deshpande V S and Fleck N A. (2004) Dynamic Response of a Clamped Circular Sandwich Plate Subject to Shock Loading. ASME J.Appl. Mech., 71(5), 637-645.
25.Wei Y, Qiu X and Hwang K C. (2004) Stead-State Crack Growth and Fracture Work Based on the Theory of Mechanism-Based Strain Gradient Plasticity. Eng. Fract. Mech., 71(1), -125.
26.Qiu X and Deshpande V S and Fleck N A. (2003) Finite Element Analysis of the Dynamic Response of Clamped Sandwich Beams. Eur. J. Mech.-A/Solids, 22, 801-814.
27.Liu B, Qiu X, Huang Y, Hwang K C, Li M and Liu C. (2003) The Size Effect on Void Growth in Ductile Materials. J. Mech. Phys. Solids, 51(7), 1171-1187.
28.Hwang K C, Liu B, Qiu X. (2003) The Void effect in Metallic Materials, Key Eng. Mat., 243-244, 405-410.
29.Qiu X, Huang Y, Wei Y G, Gao H and Hwang K C. (2003) The Flow Theory of Mechanism-Based Strain Gradient Plasticity. Mechanics of Material, 35, 245-258.
30.Qiu X, Huang Y, Nix W D Hwang K C and Gao H. (2001) Effect of Intrinsic Lattice Resistance in Strain Gradient Plasticity. Acta Mater. 49, 3949~3958.
31.Qiu X, Guo T and Hwang K C. (2000) FEM Solutions for Plane Stress Mode-I and Mode-II Cracks in Strain Gradient Plasticity. Sci. China (Series A), 43(9), 969~979