姓 名:任静
技术职务 :研究员
办公电话 :**
通讯地址 :北京市海淀区清华大学能源与动力工程系燃气轮机研究所
电子邮件 :renj@tsinghua.edu.cn
教育背景1992/09-1997/06，中国农业大学，流体机械专业，博士，
1988/09-1992/06，北京农业工程大学，流体机械专业，学士
工作履历2008/03-至今，清华大学，热能工程系，研究员
1999/11-2008/02，德国亚琛工业大学，机械学院燃气轮机与汽轮机研究所，博士后/项目主管
1997/09-1999/06，清华大学，水利系流体机械专业，博士后
研究领域燃气轮机冷却机制和优化方法
燃气轮机二次空气系统流热耦合特性
叶轮机械气动热力学
研究概况现任清华大学热能工程系燃气轮机研究所研究员，ASME Tubo Expo传热委员会委员及最佳论文评委，《Journal of Power and Energy》期刊编委。
主要研究方向是燃气轮机冷却机理和优化方法。长期从事燃气轮机透平先进冷却机制、二次空气系统典型单元气动与传热特性的研究。建立了具有自主知识产权的气冷透平优化平台，并应用于燃气轮机气冷透平的自主研发。先后负责过多项国家973燃气轮机项目课题、自然科学面上项目、国际/企业合作项目。获发明专利3项，在国际期刊、会议和国内核心期刊上发表文章百余篇。
学术成果 Recent Publications:
1.Li W, Yang L, Ren J, Hongde Jiang.Effect of thermal boundary conditions and thermal conductivity on conjugate heat transfer performance in pin fin arrays[J]. International Journal of Heat and Mass Transfer, 2016, 95: 579-592.
2.Li W, Ren J, Hongde J, et al.Assessment of six turbulence models for modeling and predicting narrow passage flows, part 2: Pin fin arrays[J]. Numerical Heat Transfer, Part A: Applications, 2016, 69(5): 445-463.
3.Li W, Ren J, Hongde J, et al.Assessment of six turbulence models for modeling and predicting narrow passage flows, part 1: Impingement jets[J]. Numerical Heat Transfer, Part A: Applications, 2016, 69(2): 109-127.
4.Li X, Ren J, Jiang H. Multi-row film cooling characteristics on a vane endwall[J]. International Journal of Heat and Mass Transfer, 2016, 92: 23-33.
5.Qin, Yanmin1;Li, Xueying1;Ren, Jing1;Jiang, Hongde. Effects of compound angle on film cooling effectiveness with different streamwise pressure gradient and convex curvature. International Journal of Heat and Mass Transfer,2015 Vol.86 pp 482-491.
6.Li X, Ren J, Jiang H. Application of algebraic anisotropic turbulence models to film cooling flows[J]. International Journal of Heat and Mass Transfer, 2015, 91: 7-17.
7.Yang L., Ren J., Jiang H., Ligrani P., Experimental and numerical investigation of unsteady impingement cooling within a blade leading edge passage, International Journal of Heat and Mass Transfer，Vol.71, 2014, pp57-68
8.Kan R., Guo L., Ren J., Huang S., Jiang H.D., Yan Y.Y., Determining mainstream reference temperature using the non-dimensional temperature analysis in the transient liquid crystal technique, International Journal of Heat and Mass Transfer, Vol.72, 2014, pp 201-209
9.Chi, ZR; Ren, J; Jiang, HD, Coupled Aerothermodynamics Optimization for the Cooling System of a Turbine Vane, J. Turbomach.-Trans. ASME, Vol.136, No.5, 2014
10.Li, XY; Ren, J; Jiang, HD, Film Cooling Modeling of Turbine Blades Using Algebraic Anisotropic Turbulence Models, J. Turbomach.-Trans. ASME, Vol.136, No.11,2014
11.Chang Han,Zhongran Chi,Jing RenandHongde Jiang, Optimal Arrangement of Combined-Hole for Improving Film Cooling Effectiveness,Journal of Thermal Science and Engineering A[1-45]pplications , 2014, 7(1).
12.Xueying Li, Yanmin Qin, Jing Ren, Hongde Jiang, AlgebraicAnisotropic Turbulence Modeling of Compound Angled Film Cooling Validated ByPIV and PSP Measurements, ASME Journal of Heat Transfer, v 136, n 3, March 2014
13.Zhongran Chi, Rui Kan, Jing RenandHongde Jiang. Experimental and Numerical Study of the Anti-Crossflows Impingement Cooling Structure,International Journal of Heat and Mass Transfer, v 64, p 567-580, 2013.
14.Hong Yin,Yanmin Qin,Jing Renand Hongde Jiang. Effect of Inlet Swirl on the Model leading Edge of Turbine Vane. ASME GT2013-94471, San Antonio, USA, June,2013.
15.Zhongran Chi,Jing RenandHongde Jiang. Cooling Structure Optimization for a Rib-roughed Channel in a Turbine Rotor Blade, ASME GT2013-94527, San Antonio, USA, June,2013.
16.Rui Kan, Li Yang,Jing Ren,and Hongde Jiang. Effect of Rib Configuration and Lateral Ejection on a High Aspect Ratio Trailing Edge Channel, ASME GT2013-94549, San Antonio, USA, June,2013.
17.Chang Han,Zhongran Chi,Jing Renand Hongde Jiang. Optimal Arrangement of Combined-Hole for Improving Film Cooling Effectiveness, ASME GT2013-94561, San Antonio, USA, June,2013.
18.Li Yang, Rui Kan,Jing RenandHongde Jiang.Effect of Film Cooling Arrangement on Impingement Heat Transfer on Turbine Blade Leading Edge, ASME GT2013-95261, San Antonio, USA, June,2013.
19.李雪英，韩昌，秦晏旻，任静，蒋洪德，扇形孔气膜冷却应用的综合特征，工程热物理学报，第34卷，第1期，55-58页，2013
20.韩昌，任静，蒋洪德，多参数对叶顶气膜冷却的影响，工程热物理学报，第33卷，第9期，1501-1504页，2012
21.李雪英，任静，蒋洪德，湍流粘性修正在不同孔型气膜冷却计算中的应用，工程热物理学报，第33卷，第4期，578-582页，2012
22.李雪英，任静，蒋洪德，气膜冷却计算中湍流粘性系数的修正，工程热物理学报，第32卷，第4期，573-576页，2012
23.秦晏旻，李雪英，郭安琪，任静，蒋洪德，多参数影响下的气膜冷却特性及预测方法，热力透平，第41卷，第1期，13-17页，2012
24.杨力，阚瑞，任静，蒋洪德，带气膜孔内部冷却通道的流动传热特性，工程热物理学报，第32卷，第8期，1385-1388页，2011
25.秦晏旻，李雪英，任静，蒋洪德，基于BP神经网络的多参数气膜冷却效率研究，工程热物理学报，第32卷，第7期，1127-1130页，2011
26.Chang Han, Jing Ren and Hongde Jiang. Multi-parameter influence on combined-hole film cooling system, International Journal of Heat and Mass Transfer, v 55, n 15-16, p 4232-40, July 2012.
27.Xueying Li, Jing RenandHongde Jiang. Full Field AlgebraicEddy Viscosity Model for the Film cooling Flows, ASME GT2012-68667, Copenhagen, Denmark, June 2012.
28.Wenping Wan, Peng Sun, Jing Ren, Hongde Jiang, Radiation Effectiveness on the Aero- and Thermodynamics in A Highly Thermally Loaded Film Cooling System, Proceedings of the ASME Turbo Expo 2011, June，6-10, Vancouver, Canada. ASME Paper GT2011-45592.
29.Peng Sun, Wenping Wan, Jing Ren, Hongde Jiang, Effect of the Hot Gas Composition on a Highly Thermally Loaded Film Cooling System, Proceedings of the ASME Turbo Expo 2011, June，6-10, Vancouver, Canada. ASME Paper GT2011-45593
30.Xueying Li, Jing Ren, Hongde Jiang, Algebraic Anisotropic Eddy-Viscosity Modeling Application to the Turbulent Film Cooling Flows, Proceedings of the ASME Turbo Expo 2011, June，6-10, Vancouver, Canada. ASME Paper GT2011-45791
31.Li, Lin ; Jing, Ren ; Hongde, Jiang, Application of γ-Re transition model for internal cooling simulation, Heat Transfer - Asian Research, v 40, n 1, p 69-77, January 2011,pp69-77,
32.Wei Chen，Jing Ren and Hongde Jiang, Effect of Turning Vane Configurations on Heat Transfer and Pressure Drop in a Ribbed Internal Cooling System, Journal of Turbomachinery. v 133, n 4, April 21, 2011
33.李佳，任静，蒋洪德，燃气轮机高温叶片气膜冷却系统的研究进展，热力透平，第39期，第1卷，6-10页，2010
34.李佳，韩昌，任静，蒋洪德，基于压敏漆的带横槽气膜冷却实验与数值研究，工程热物理学报，第31卷，第2卷，239-242页，2010
35.陈伟，阚瑞，任静，蒋洪德, 涡轮叶片内部冷却通道传热和压力分布特性的实验研究, 航空动力学报2010年第25卷第12期
36.韩昌，李佳，任静，蒋洪德, 基于PSP实验技术的双射流气膜冷却特性研究, 航空动力学报2010年第25卷第12期
37.尹洪，任静，蒋洪德, 燃气轮机燃用中低热值燃料性能优化方案研究, 工程热物理学报2010年第31卷第8期，1303-1306页
38.阚瑞，陈伟，任静，蒋洪德, 梯形带肋内部冷却通道的流动及传热特性, 工程热物理学报2010年第31卷第5期，753~756页
39.李佳，韩昌，任静，蒋洪德, 基于压敏漆的带横槽气膜冷却实验与数值研究, 工程热物理学报2010年第31卷第2期，239-242页
40.Jia Li, Jing Ren, Hongde Jiang, Film Cooling Performance of the Embedded Holes in Trenches With Compound Angles, Proceedings of the ASME Turbo Expo2010， Papar No. GT2010-22337.
41.WangWenping,RenJing,JiangHongde,EffectsofRadiativeHeatTransferonaHighlyThermalLoadedFilmCooledPlate,Proceedingsof3rdISJPPE(2010-ISJPPE-2023), 2010.09.17-21, Nanjing, China.
42.Wei Chen, Jing Ren, Hongde Jiang, Verification of RANS for Analyzing Convective Cooling System With and Without Ribs, Proceedings of the ASME Turbo Expo2009, Papar No. GT2009-59427.
43.Qinxue Tan, Jing Ren, Hongde Jiang, Prediction of Flow Features in Rotating Cavities With Axial Throughflow by RANS and LES, Proceedings of the ASME Turbo Expo2009, Papar No. GT2009-59428.
44.林立，任静，蒋洪德, γ-Re_θ转捩模型在内部冷却叶片中的应用, 工程热物理学报2009年第30卷第11期，1849-1852页。
45.谭勤学，任静，蒋洪德, 轴向通流旋转盘腔中流动与传热数值研究, 工程热物理学报2009年第30卷第7期，1129-1131页。
46.Dieter Bohn, Jing Ren. How Far Have We Been? –Summary of the Investigation on Rotating Cavity at IDG, RWTH Aachen Uni.-. Frontiers of Energy and Power Engineering in China,2009 Vol.27.
47.Wei Chen, Jing Ren and Hongde Jiang, Numerical investigation of heat transfer and pressure drop in smooth and ribbed U-duct, Conference of Engineering Thermophysics, Paper No. 082003, 2008.10.22-28, Tianjin, China.
48.Qinxue Tan, Jing Ren and Hongde Jiang, Aero- and thermal dynamics in a rotating cavity with axial-through flow, Paper No. 082005, 2008.10.22-28, Tianjin, China.
49.Jia Li, Jing Ren and Hongde Jiang, Numerical computationof multi-row cylindricalholes and fanshaped holes, Paper No. 082006, 2008.10.22-28, Tianjin, China.
50.Li Lin, Jing Ren and Hongde Jiang, Application of γ-Reθtransition model in a convective cooling blade, Paper No. 082007, 2008.10.22-28, Tianjin, China.
51.Wenping Wang, Jing Ren and Hongde Jiang, Aerodynamicsand Conjugate heat transfer in a transonic cascade, Conference of Engineering Thermophysics, Paper No. 082008, 2008.10.22-28, Tianjin, China.
52.Jing Ren, Highlythermally loaded material and cooling technology in Ultra-Super Critical Steam Turbine, Academic Symposiumof China Power Engineering, 2008.09.18-21, Nanjing, China.
53.Dieter Bohn, Jing Ren, Christian Tümmers. Investigation on the unsteable flow structure in a rotaing cavity. ASME Journal of Engineering for Gas Turbine and Energy (accepted)
54.Dieter Bohn, Jing Ren. Laminar and Turbulent Influence on the Unsteady Flow Pattern in a Rotating Cavity.The 7th European Conference on Turbomachinery, 5 - 9 March, 2007, Athens,Greece
55.Dieter Bohn, Jing Ren, Karsten Kusterer. Investigation of the Steam-cooled Blade in a Steam Turbine Cascade. 1st International Symposium on Jet Propulsion and Power Engineering (ISJPPE). Kunming, China. Sept. 17-22, 2006.
56.Peng Shan, Dieter Bohn, Jing Ren, Norbert Sürken. Thermally highly loaded, porous and cooled multi-layer systems for combined cycle power plants. 1st International Symposium on Jet Propulsion and Power Engineering (ISJPPE). Kunming, China. Sept. 17-22, 2006.
57.Dieter Bohn, Jing Ren, Christian Tümmers. Investigation on the unsteable flow structure in a rotaing cavity. ASME Turbo Expo. Barcelona, Spain？May 08-11, 2006. Paper No. GT2006-90494.
58.Dieter E. Bohn, Jing Ren, Karsten Kusterer. System Investigation of the Heat Transfer Rate in the Film Cooling Flowfield. International Journal of Rotating Machinery, Iss. 3, Vol. 2005, pp 211-220
59.Dieter E. Bohn, Sabine Ausmeier, Jing Ren. Investigation of the Optimum Clocking Position in a Two-stage Axial. International Journal of Rotating Machinery, Iss. 3, Vol. 2005, pp 202-210
60.Dieter Bohn, Jing Ren, Christian Tümmers, Michael Sell. Effect of clocking on the pressure distribution in a two-stage axial turbine. 17th International Symposium on Airbreathing Engines. September 4-9, 2005, Munich, Germany. Paper No. ISABE-2005-1034.
61.Dieter Bohn, Jing Ren, Christian Tümmers, Michael Sell. Unsteady 3D-Numerical Investigation of the Influence of the Shroud Cavities on the Stator-Rotor Interaction in a 2-stage Turbine. 17th International Symposium on Airbreathing Engines. September 4-9, 2005, Munich, Germany. Paper No. ISABE-2005-1155.
62.Dieter E. Bohn, Jing Ren, Karsten Kusterer. Cooling performance of the steam-cooled blade in a steam turbine cascade. ASME Turbo Expo. Reno, Nevada, USA？June 06-09, 2005. Paper No. GT2005-68148.
63.Dieter Bohn, Jing Ren, Christian Tümmers, Michael Sell.Unsteady 3D-Numerical Investigation of the Influence of the Blading Design on the Stator-Rotor Interaction in a 2-Stage Turbine. ASME Turbo Expo. Reno, Nevada, USA？June 06-09, 2005. Paper No. GT2005-68115.
64.Dieter E. Bohn, Jing Ren. Tubines clock in: improving efficiency by the clocking technique, CD Adapco Dynamics, Issue 24, Spring 2005, pp. 22-23.
65.Dieter Bohn, Jing Ren. Improving turbine's efficiency by the clocking technique. STAR European Conference 2005, February 28 - March 1, 2005, London, UK
66.Dieter E. Bohn, Jing Ren. Influence of StatorClocking on the Unsteady 3D Flow in a Two-stage Turbine. ASME Journal of Turbomachinery.Vol. 127 Issure 1, pp 156-163 (revised version of the ASME paper GT2004-53511)
67.Dieter Bohn, Joachim Funcke, Jing Ren, Norbert Sürken, Michael Sell, Thomas Osterhage. Numerical and experimental investigation of the wetness in the front stages of a low-pressure steam turbine. VGB Power Technology, Issue 11/2004
68.Bohn, D., and Ren, J.. Influence of Stator Clocking on the Unsteady 3-dimensional Flow in a 2-stage Turbine. ASME Turbo Expo. Vienna, Austria？June 14-17, 2004. ASME paper 2004-GT-53511
69.Bohn, D., Funcke, J., Ren, J., and Sürken, N.. Numerische und experimentelle Untersuchung der N？sse in der Frontstufen von Niederdruckdampfturbinen. Dampfturbinen und Dampfturbinenbetrieb 2004. Regensburg, Germany. June 15-16, 2004. (German)
70.Bohn, D., Ren, J., and Kusterer, K.. System Investigation of the Heat Transfer Rate in the Film Cooling Flowfield. The 10th of International Symposium on Transport Phenomena and Dynamics of Rotating Machinery. Honolulu, Hawaii, March 07-11, 2004. paper ISROMAC10-2004-138.
71.Bohn, D., Ausmeier, S., and Ren, J.. Investigation of the Optimum Clocking Position in a Two-stage Axial. The 10th of International Symposium on Transport Phenomena and Dynamics of Rotating Machinery. Honolulu, Hawaii, March 07-11, 2004. Paper ISROMAC10-2004-144
72.Lepers, J., Kusterer, K., Bohn, D., and Ren, J.. Cooling Towers in the wind. CD adapco Dynamics, Issue21, Fall 2003.
73.Bohn, D., Ren, J., and Kusterer, K.. Conjugate heat Transfer Analysis for Film cooling Configuration with Different Hole Geometries. Proceedings of ASME TURBO EXPO 2003, June 16-19, 2003, Atlanta, Georgia, USA, GT-2003-38369
74.Bohn, D., Ren, J., and Kusterer, K.. Conjugate Heat Transfer Analysis of Cooling Jets Ejected from a Row of Shaped Holes. The 6th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows (6th ISAIF), Apr. 7-11, 2003 Shanghai, China
75.Bohn, D., Ren, J., and Kusterer, K.. Influence of Conjugate Heat Transfer on Film Cooling. The 5th European Conference on TURBOMACHINERY, 17 - 22 March, 2003, PRAGUE,Czech Republic
76.Bohn, D., and Ren, J.. A Unitary Heterogeneous Nucleation Model for superheated Compressible Flow. The 4 th International conference on Pumps and Fans (4 th ICPF), August 26-29, 2002,Tsinghua University, Beijing, China
77.Bohn, D., Kerpicci, H., Ren, J., and Sürken, N.. Homogeneous and Heterogeneous Nucleation and Wet-Steam Flow in a Nozzle and an LP-Turbine Cascade. The 9th International Symposium on the Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 10-14, 2002
78.Bohn, D., and Ren, J.. Salt Solution and Radius Dependence of Surface Tension in Heterogeneous Nucleation in Steam Turbine. 2001 Chinese Engineering Thermophysics Conference, Oct. 14-17, 2001.
79.Bohn, D., Kerpicci, H., Ren, J., and Surken, N.. Homogeneous and heterogeneous mucleation in a nozzle guide vane of a LP-steam turbine. 4th European Conference on Turbomachinery, March 20-23, 2001,Firenze, Italy. pp813-822
80.Bohn, D., Kerpicci, H., Ren, J., and Surken, N.. Aktive beeinflussung der Thermodynamischen und kinematischen Relaxationsprozesse in Niederdruckdampfturbinen durch Intensiverung des keimbildungsprozesses. Siebtes Statusseminar Verbundprojeckt hochtemperature-Gasturbine & Verbundprojeckt CO2-armes Kraftwerk-500MW auf einer Welle, Dec.7-8, 2000. pp1303-1312 (German)
81.Bohn, D., and Ren, J.. Numerical research on the hetergeneous condensation in a nozzle guide vane of a LP-steam turbine. 2th International Symposium on Fluid machinery and fluid Engineeting, Oct. 22-25, 2000, Beijing, China. pp.314-321
82.Bohn, D., Kerpicci, H., and Ren, J.. Comparison of homogeneous and heterogeneous condensation in a nozzle guide vane of a LP-steam turbine. 5th International Symposium on Heat Transfer. Aug. 12-16, 2000, Beijing, China. pp. 533-538