姓名：谭磊
技术职务：特别研究员，博士生导师
通讯地址：北京市海淀区清华大学能动系100084
办公电话：
电子邮箱：tanlei@mail.tsinghua.edu.cn
教育背景2002.09-2006.07 西安交通大学能动学院，热能与动力工程，学士
2006.09-2011.07 清华大学热能工程系，动力工程及工程热物理，博士

工作履历2011.07-2014.06 清华大学机械系，博士后
2012.07-2013.07 美国威斯康星大学，博士后
2014.06-2016.11 清华大学能动系（热能系），讲师，硕导
2016.11-2019.06 清华大学能动系（热能系），助理研究员，硕导
2019.06至今 清华大学能动系，特别研究员，博导
研究领域流体机械流动理论、流动控制、设计及优化、两相流及空化、振动、噪声
研究概况
研究项目
项目负责人
中国博士后科学基金：离心泵前置导叶预旋调节机理及其空化特性研究
清华大学自主科研计划：混流泵叶顶间隙区流动机理研究
流体及动力机械教育部重点实验室开放基金：基于浸没有限元法的水轮机转轮流固耦合研究
北京市自然科学基金：混流泵叶顶间隙区流动特性研究
水沙科学与水利水电工程国家重点实验室开放基金：空化射流相干结构时空演化的研究
国家自然科学基金：混流泵均等与非等叶顶间隙下流动特性及径向力研究
水沙科学与水利水电工程国家重点实验室开放基金：气泡导入流及气泡羽流的实验和数值研究
水沙科学与水利水电工程国家重点实验室自主项目：深海油气混输泵内两相流动机理研究
国家自然科学基金：混流泵叶顶间隙涡流的流动特征及动力学模态研究
流体及动力机械教育部重点实验室开放基金：混流泵叶顶间隙流动机理及流动控制研究
空气动力学国家重点实验室基金：超声速空腔流动的浅水流模拟实验研究
北京市自然科学基金：混流泵内气液两相流的流动特性研究
项目负责人
公司：船用保鲜库房气体组分变化分析
阿特拉斯.科普柯（无锡）压缩机有限公司：轴流式风扇的性能曲线
中国航天科技集团北京控制工程研究所：气液两相流气泡检测算法优化研究
西安热工研究院：阀门节流压力恢复特性测试试验
中国华能集团清洁能源技术研究院有限公司：旋风分离器中心筒内导流元件结构优化
中国人民解放军63833部队：超声速空腔流动的水流模拟方法研究
中国石油集团钻井工程技术研究院：水力振荡器流场计算程序技术开发
中国航天科技集团北京控制工程研究所：在轨加注系统联合仿真研究
中国航天科技集团北京控制工程研究所：超小型泵内部流动的数值仿真及可靠性分析
中国原子能科学研究院：试验件流动稳定性研究
博世电动工具（中国有限公司）：流动和传热平台研究
中国船舶工业集团公司第七0八研究所：喷水推进装置优化设计
中国航发四川燃气涡轮研究院：组合动力试验进排气系统动态建模技术研究
公司：风机及流道优化设计
中国航天科技集团北京控制工程研究所：智能泵水力性能优化仿真分析
项目骨干
国家自然科学基金：离心泵前置导叶预旋调节与节能研究
国家863计划项目：供暖系统中末端特种离心泵的研制
国家自然科学基金：复杂边界高雷诺数非定常流动的三维涡方法研究
国家973计划项目：核主泵制造的关键科学问题
国家自然科学基金：高比转速混流泵的优化设计理论研究，
水沙科学与水利水电工程国家重点实验室自主项目：抽蓄电站水力-机械系统工况转换流激振动机理研究
国家自然科学基金：叶片泵内气液两相流型基础问题研究
国家自然科学基金：考虑水力稳定性的水泵水轮机优化设计研究
奖励与荣誉[1] 2009年清华大学优秀共产党员
[2] 2011年清华大学热能工程系学术新秀
[3] 2013年教育部科技进步二等奖，基于涡动力学理论的水力机械流动分析及优化设计，证书号：2013-227.
[4] 2015年领跑者5000中国精品科技期刊顶尖学术论文，证书编号：N.
[5] 2016年清华大学大学生研究训练（SRT）计划优秀指导教师一等奖
[6] 2016年清华大学第三十四届“挑战杯”学生课外学术科技作品竞赛优秀指导教师
[7] 2016年清华大学宣传工作先进个人
[8] 2017年清华大学热能工程系优秀共产党员
[9] 2017年清华大学本科毕业优秀论文指导教师
[10] 2017年清华大学就业工作先进个人
[11] 2018年中国机械工业科学技术奖二等奖，DM型MVR蒸汽压缩机，证书号：**.
[12] 2019年清华大学能源与动力工程系优秀共产党员
学术成果 发明专利
[1] 谭磊，曹树良，祝宝山，孟根其其格，徐昀，屈万世. 一种抑制涡流的离心泵压水室及具有其的离心泵，发明专利，中国，专利号：ZL4.X（授权时间**）
[2] 谭磊，曹树良，祝宝山，孟根其其格，徐昀，屈万世. 离心泵叶轮，发明专利，中国，专利号：ZL5.0（授权时间**）
[3] 谭磊，刘明. 一种在中心筒内装设导流叶片的旋风分离器，发明专利，中国，专利号：ZL8.3（授权时间**）
[4] 谭磊，刘明，孟根其其格. 抑制涡流和扩散段减阻的离心泵非对称压水室及离心泵，发明专利，中国，专利号：ZL6.6（授权时间**）
[5] 谭磊，任宣铭. 增强混合的气液两相旋转射流泵，发明专利，中国，专利号：ZL2.9（授权时间**）
[6] 谭磊，宋宇，等. 电磁驱动机构，发明专利，中国，专利号：ZL9.7（授权时间**）
软件著作权
[1] 谭磊. 水力机械旋转叶轮三维网格自动生成软件V1.0，计算机软件著作权登记证书，中国，登记号：2017SR064641，证书号：软著登字第**号（授权时间**）
[2] 谭磊，张锦松. 喷管扩散段设计及计算模拟软件V1.0，计算机软件著作权登记证书，中国，登记号：2017SR581501，证书号：软著登字第**号（授权时间**）
[3] 谭磊，韩亚东. 流场动力学模态分解软件V1.0，计算机软件著作权登记证书，中国，登记号：2018SR073671，证书号：软著登字第**号（授权时间**）
学术论文
Researchgate主页：https://www.researchgate.net/profile/Lei_Tan5
一作、二作或通讯作者的SCI论文共39篇（ESI热点论文2篇，ESI高被引论文1篇）：
[1] Tan Lei*, Cao Shuliang, Gui Shaobo. Hydraulic design and pre-whirl regulation law of inlet guide vane for centrifugal pump [J]. Science china technological sciences, 2010, 53(8): 2142-2151.
https://doi.org/10.1007/s11431-010-4005-5
[2] Tan Lei, Cao Shuliang*, Wang Yuming, Zhu Baoshan. Numerical simulation of cavitation in a centrifugal pump at low flow rate[J]. Chinese Physics Letters, 2012, 29(1): 014702.
https://doi.org/10.1088/0256-307X/29/1/014702
[3] Tan Lei, Cao Shuliang*, Wang Yuming, Zhu Baoshan. Influence of axial distance on pre-whirl regulation by the inlet guide vanes for a centrifugal pump[J]. Science China Technological Sciences, 2012, 55(4): 1037-1043.
https://doi.org/10.1007/s11431-012-4756-2
[4] Tan Lei*, Cao Shuliang, Wang Yuming, Zhu Baoshan. Direct and inverse iterative design method for centrifugal pump impellers[J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2012, 226(6): 764-775.
https://doi.org/10.1177/1411
[5] Bing Hao*, Tan Lei, Cao Shuliang, Lu Li. Prediction method of impeller performance and analysis of loss mechanism for mixed-flow pump [J]. Science China Technological Sciences, 2012, 55(7): 1988-1998.
https://doi.org/10.1007/s11431-012-4867-9
[6] Tan Lei, Zhu Baoshan*, Cao Shuliang, Wang Yuming. Cavitation flow simulation for a centrifugal pump at a low flow rate[J]. Chinese Science Bulletin, 2013, 58(8): 949-952.
https://doi.org/10.1007/s11434-013-5672-y
[7] Tan Lei, Zhu Baoshan*, Cao Shuliang, Wang Yuchuan, Wang Binbin. Numerical simulation of unsteady cavitation flow in a centrifugal pump at off-design conditions[J]. Proceedings of the Institution of Mechanical Engineers, Part C-Journal of Mechanical Engineering Science, 2014, 228: 1994-2006.
https://doi.org/10.1177/4573
[8] Tan Lei, Zhu Baoshan*, Cao Shuliang, Bing Hao, Wang Yuming. Influence of blade wrap angle on centrifugal pump performance by numerical and experimental study[J]. Chinese Journal of Mechanical Engineering, 2014, 27(1): 171-177.
https://doi.org/10.3901/CJME.2014.01.171
[9] Tan Lei, Zhu Baoshan*, Cao Shuliang, Wang Yuchuan, Wang Binbin. Influence of prewhirl regulation by inlet guide vanes on cavitation performance of a centrifugal pump[J]. Energies, 2014, 7(2): 1050-1065.
https://doi.org/10.3390/en**
[10] Tan Lei, Zhu Baoshan*, Wang Yuchuan, Cao Shuliang, Liang Kaihong. Turbulent flow simulation using large eddy simulation combined with characteristic-based split scheme [J]. Computers & Fluids, 2014, 94: 161-172.
https://doi.org/10.1016/j.compfluid.2014.01.037
[11] Tan Lei, Zhu Baoshan, Wang Yuchuan, Cao Shuliang, Gui Shaobo. Numerical study on characteristics of unsteady flow in a centrifugal pump volute at partial load condition[J]. Engineering Computations, 2015, 32(6): 1549-1566.
https://doi.org/10.1108/EC-05-2014-0109
[12] Wang Yuchuan, Tan Lei*, Zhu Baoshan, Cao Shuliang, Wang Binbin. Numerical investigation of influence of inlet guide vanes on unsteady flow in a centrifugal pump[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015, 18(229): 3405-3416.
https://doi.org/10.1177/0105
[13] Wang Yuchuan, Tan Lei*, Wang Binbin, Cao Shuliang, Zhu Baoshan, Numerical investigation on frequency jump of flow over a cavity using large eddy simulation [J]. Journal of Fluids Engineering, 2015, 137(8): 81203.
https://doi.org/10.1115/1.**
[14] Qu Wanshi, Tan Lei*, Cao Shuliang, Wang Yuchuan, Xu Yun. Numerical investigation of clocking effect on a centrifugal pump with inlet guide vanes[J]. Engineering Computations, 2016, 33(2): 465-481.
https://doi.org/10.1108/EC-12-2014-0259
[15] Hao Yue, Tan Lei*, Liu Yabin, Xu Yun, Zhang Jinsong, Zhu Baoshan. Energy performance and radial force of a mixed-flow pump with symmetrical and unsymmetrical tip clearances[J]. Energies, 2017, 10(1):57.
https://doi.org/10.3390/en**
[16] Liu Yabin, Tan Lei*, Hao Yue, Xu Yun. Energy performance and flow patterns of a mixed-flow pump with different tip clearance sizes [J]. Energies, 2017, 10(1):191. DOI: 10.3390/en**
https://doi.org/10.3390/en**
[17] Xu Yun, Tan Lei*, Liu Yabin, Cao Shuliang. Pressure fluctuation and flow pattern of a mixed-flow pump with different blade tip clearances under cavitation condition [J]. Advances in Mechanical Engineering, 2017, Vol. 9(4) 1-12.DOI: 10.3390/en**
https://doi.org/10.1177/**96227
[18] Liu Yabin, Tan Lei*, Liu Ming, Hao Yue, Xu Yun. Influence of prewhirl angle and axial distance on energy performance and pressure fluctuation for a centrifugal pump with inlet guide vanes [J]. Energies, 2017, 10(5):695.
https://doi.org/10.3390/en**
[19] Xu Yun, Tan Lei*, Cao Shuliang, Qu Wanshi. Multiparameter and multiobjective optimization design of centrifugal pump based on orthogonal method [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2017, 231(14): 2569-2579.
https://doi.org/10.1177/0303
[20] Tan Lei*, Yu Zhiyi, Xu Yun, Liu Yabin, Cao Shuliang. Role of blade rotational angle on energy performance and pressure fluctuation of a mixed-flow pump [J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2017, 231(3): 227-238.
https://doi.org/10.1177/9948
[21] Zhu Baoshan, Tan Lei, Wang Xuhe, Ma Zhe. Investigation on flow characteristics of pump-turbine runners with large blade lean [J]. ASME Journal of Fluids Engineering, 2018, 140(3), 031101-1-9.
https://doi.org/10.1115/1.**
[22] Tan Lei, Zuo Lihua*, Wang Binbin. Methods of decline curve analysis for shale gas reservoirs [J]. Energies, 2018, 11(3), 552.
https://doi.org/10.3390/en**
[23] Liu Ming, Tan Lei*, Cao Shuliang. Design method of controllable blade angle and orthogonal optimization of pressure rise for a multiphase pump [J]. Energies, 2018, 11(5), 1048.
https://doi.org/10.3390/en**
[24] Zhang Jinsong, Tan Lei*. Energy performance and pressure fluctuation of a multiphase pump with different gas volume fractions. Energies, 2018, 11(5), 1216.
https://doi.org/10.3390/en**
[25] Tan Lei*, Xie Zhifeng, Liu Yabin, Hao Yue, Xu Yun. Influence of T-shape tip clearance on performance of a mixed-flow pump [J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of power and energy, 2018, 232(4), 386-396.
https://doi.org/10.1177/3129
[26] Liu Yabin, Tan Lei*. Method of C groove on vortex suppression and energy performance improvement for a NACA0009 hydrofoil with tip clearance in tidal energy [J]. Energy, 2018, 155, 448-461.
https://doi.org/10.1016/j.energy.2018.04.174
[27] Hao Yue, Tan Lei*. Symmetrical and unsymmetrical tip clearances on cavitation performance and radial force of a mixed flow pump as turbine at pump mode [J]. Renewable Energy, 2018, 127, 368-376.
https://doi.org/10.1016/j.renene.2018.04.072
[28] Liu Ming, Tan Lei*, Cao Shuliang. Influence of geometry of inlet guide vanes on pressure fluctuations of a centrifugal pump [J]. ASME Journal of Fluids Engineering, 2018, 140(9), 091204-1-13.
https://doi.org/10.1115/1.**
[29] Liu Ming, Tan Lei*, Liu Yabin, Xu Yun, Cao Shuliang. Large eddy simulation of cavitation vortex interaction and pressure fluctuation around hydrofoil ALE 15 [J]. Ocean Engineering, 2018, 163, 264-274.
https://doi.org/10.1016/j.oceaneng.2018.06.005
[30] Liu Ming, Tan Lei*, Cao Shuliang. Controllable velocity moment and prediction model for inlet guide vanes of a centrifugal pump [J]. Engineering computations. 2018, 35(3), 1364-1382.
https://doi.org/10.1108/EC-05-2017-0186
[31] Liu Yabin, Tan Lei*. Tip clearance on pressure fluctuation intensity and vortex characteristic of a mixed flow pump as turbine at pump mode [J]. Renewable Energy, 2018, 129, 606-615.
https://doi.org/10.1016/j.renene.2018.06.032
[32] Xu Yun, Tan Lei*, Liu Yabin, Hao Yue, Zhu Baoshan, Cao Shuliang. Pressure fluctuation and flow pattern of a mixed-flow pump under design and off-design conditions [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2018, 232(13): 2430-2440.
https://doi.org/10.1177/1258
[33] Liu Yabin, Tan Lei*, Wang Binbin. A review of tip clearance in propeller, pump and turbine [J]. Energies, 2018, 11(9), 2202.
https://doi.org/10.3390/en**
[34] Liu Ming, Tan Lei*, Cao Shuliang. Cavitation-vortex-turbulence interaction and one-dimensional model prediction of pressure for hydrofoil ALE15 by large eddy simulation [J]. ASME Journal of Fluids Engineering, 2019, 141(2): 021103-1-17.
https://doi.org/10.1115/1.**
[35] Xiao Wenyang, Tan Lei*. Control strategy optimization of electrolyte flow rate for all vanadium redox flow battery with consideration of pump[J]. Renewable Energy, 2019, 133:1445-1454.
https://doi.org/10.1016/j.renene.2018.09.018
[36] Liu Ming, Tan Lei*, Cao Shuliang. Theoretical model of energy performance prediction and BEP determination for centrifugal pump as turbine[J]. Energy, 2019, 172:712-732.
https://doi.org/10.1016/j.energy.2019.01.162
[37] Liu Ming, Tan Lei*, Cao Shuliang. Dynamic mode decomposition of cavitating flow around ALE 15 hydrofoil[J]. Renewable Energy, 2019, 139:214-227.
https://doi.org/10.1016/j.renene.2019.02.055
[38] Liu Yabin, Tan Lei*. Spatial-temporal evolution of tip leakage vortex in a mixed flow pump with tip clearance [J]. ASME Journal of Fluids Engineering, 2019, 141(8): 081302-1-11.
https://doi.org/10.1115/1.**
[39] Liu Ming, Tan Lei*, Cao Shuliang. Dynamic mode decomposition of gas-liquid flow in a rotodynamic multiphase pump [J]. Renewable Energy, 2019, 139: 1159-1175.
https://doi.org/10.1016/j.renene.2019.03.015