电机与电器研究所 - 刘慧娟
姓　　名：
刘慧娟(Liu Huijuan)

职　　称：
教授 博士生导师

学术兼职：
IEEE Member，IEEE Transactions on Industrial Electronics 、
IEEE Transactions on Energy Conversion 、
《电机与控制学报》、《哈尔滨工程大学学报》等期刊论文审稿人

部　　门：
电机与电器研究所

办公电话：


办公地点：
电气楼203

传　　真：


电子邮件：
hjliu@bjtu.edu.cn


个人简介 ：1985.09—1989.07：天津大学电力及自动化工程系学习，获工学学士学位
1989.08—1991.08：安徽省合肥市威达威型电机厂技术科工作
1991.09—1994.03：天津大学电力及自动化工程系学习，获电机及其控制工学硕士学位
1994.03至今：北京交通大学电气工程学院执教，从事电机设计与控制相关的教学与科研工作。
工作期间：
2008.02—2008.09：美国俄亥俄州立大学（The Ohio State University, Cloumbus,USA）Longya Xu教授的实验室做访问,从事无刷双馈电机与高速同步电机的研究工作，
2009.12：北京交通大学获工学博士学位
2011.05—2011.11：应邀到香港理工大学电机工程系做Research Fellow, 从事横向磁场电机的设计、电磁场计算等研究工作
2013.07—2013.08：应邀到香港理工大学电机工程系做Research Fellow.
目前在读博士生3人，硕士生4人，已毕业硕士生30余人，指导学生多次获得国家奖学金及优秀硕士毕业论文。
研究方向 ：【1】面向新能源电动汽车、高速列车等领域的牵引驱动电机优化设计及多物理场（电磁场、温度场、结构力场、流体场）耦合仿真研究；
【2】新型特种电机新理论及其电力电子驱动控制新技术研究；
【3】新型混合磁通特种电机新理论及其控制系统研究；
【4】电磁装置内电磁场分析研究、有限元理论及其应用技术研究；
本课题组招收电力电子与电力传动、电机与电器、多物理场数值计算方向的博士研究生、硕士研究生。
欢迎热衷于学习研究新能源电动汽车用永磁电机、感应电机以及新型电机的电磁设计及控制系统开发；列车牵引电机设计；电磁场理论研究的同学攻读博士、硕士学位！
2019年度，课题组博士研究生招生名额为1-2人，实验室有高水平横向、纵向科研项目支撑博士学业，并可推荐毕业生到国内重点高校、研究所任职。
2019年度，本实验室硕士研究生招生名额为6人（含专业型硕士）。
科研成果 ：近几年来，北京交通大学电气工程学院203电机设计及其控制技术研究课题组在电磁场有限元理论研究，电机电磁场、温度场、结构场等多物理场设计、场路耦合以及电机控制系统设计领域积累了丰富的经验，所设计的电机系列产品全部成功应用并量产。研究期间发表了多篇SCI及EI期刊论文。
在研项目 ：【1】国家自然科学基金面上项目：一种新型非晶铁芯混合磁通调制永磁直驱轮毂电机的研究，项目批准号：**。
【2】中国科学院空间应用工程与技术中心项目：直线感应电机电磁设计
【3】科技部支撑计划：新能源风力发电技术150kW无刷双馈变速原理样机及系统的研发与设计
【4】液态金属电磁泵电磁设计及多物理场耦合仿真
【5】线性振动马达与摄像头用音圈马达多物理场优化设计与应用
【6】新能源电动汽车用18kW鼠笼式异步电机的优化设计
【7】高速动车组300km/h异步牵引电动机的研制
【8】电驱动商务车用60-100kW系列永磁同步电机的优化设计与研究
【9】现代新能源混合动力和电动汽车用永磁磁阻电机性能试验
【10】新能源风力发电技术：两种兆瓦级无刷双馈变速电机系统在风力发电系统中的可行性研究
【11】运行控制分区交接与交迭技术研究
【12】铜条鼠笼型牵引电机转子导条、端环、护环应力分析软件设计
【13】电力机车用空调电源系统的设计与研究
【14】中央高校基本科研业务费项目
教学活动 ：1.主讲本科生课程:《电机学I》,《电机学II》,《电机及拖动基础》,
《电力电子器件及应用技术》,《最优化技术》,
《信息系统加密技术及应用》.
2.主讲研究生课程:《交流电机的动态分析》,
《牵引电机可靠性技术》,
《电气优化设计》.
3.2005年《电机学》课程被评为学校的精品课程。
4.2009年至今,担任《电机学》课程负责人.
5.2012年《电机学》课程首批获得北京交通大学优质课程认证
主要论著 ：出版教材：
[1] （主编）刘慧娟.《电气传动与调速系统》，中央广播电视大学出版社，2017.8
[2] (主编) 刘慧娟，范瑜. 《Electric Machinery 电机学》——英汉双语，机械工业出版社，2014.4
[3] (主编) 刘慧娟，郭芳，张威. 《电机学》，清华大学出版社，2012.8.
[4] （主编）刘慧娟，张威.《电机学与电力拖动基础》, 国防工业出版社，2007.8.　
[5] （参编）武惠芳，郭芳.《电机与电力拖动》，清华大学出版社，2005.6.
发表论文：
2019年发表论文：
1、宋腾飞，张振洋，刘慧娟*，胡文鸾. Multi-objective optimisation design and performance comparison of permanent magnet synchronous motor for EVs based on FEA，IET Electric Power Applications，2019，13（8）1157-1166. SCI检索
2、宋腾飞，刘慧娟*，张振洋，刘威. 车用永磁电机拓扑结构设计优化与实验研究. 电机与控制学报，2019，23（6）44-53. EI检索
3、刘慧娟，张千；马杰芳. Thrust Characteristics Analysis of Long Primary Double Sided Linear Induction Machine with Plate and Novel Shuttle Secondary Structure. Transactions of Nanjing University of Aeronautics & Astronautics，2019，36（5）693-702. EI检索
4、张振洋，刘慧娟，宋腾飞，张千，胡文鸾，刘威. Performance Evaluation of a 60kW IPM Motor for Medium Commercial EV Traction Application. CES Transactions on Electrical Machines and Systems，2019，3（2）195-203.
5、刘慧娟，马杰芳，张千，李雨蔓. 双边型长初级直线感应电机电磁推力特性研究. 中国电机工程学报, 2019,39(增刊),pp:268-277.
6、刘慧娟，刘威，杜晋文，宋腾飞. 物流电动车用80kW永磁同步电机冷却系统分析. 北京交通大学学报，2019,43（2），80-85.
7、刘威，刘慧娟，杜晋文，宋腾飞.定子水冷永磁同步电机多工况热特性的研究. 微特电机，2019，47（4），1-4-12.
8、张千，刘慧娟，马杰芳，李雨蔓. A Novel Secondary for Reducing Thrust Ripple of Long Primary Double Sided Linear Induction Machine Used in Microgravity Experimental Chamber Launch System, The 22nd International Conference on Electrical Machines and Systems (ICEMS2019), 中国·哈尔滨，2019.08.11-14，1-6，ICEMS2019.
9、杜晋文，刘慧娟，张振洋. Coupling Method for Analyzing Temperature Rise in Disc-type Oil-Immersed Transformer Winding. The 22nd International Conference on Electrical Machines and Systems (ICEMS2019)，中国·哈尔滨，2019.08.11-14，1-6，ICEMS2019.
10、马杰芳，刘慧娟，张千. T-type Equivalent Circuit of Double Sided Long Primary Linear Induction Motor Considering the Backward Traveling Wave. The 4th International Conference on Electrical Engineering and Information Technologies for Rail Transportation 2019(EITRT2019)，中国·青岛，2019.10.25-27，1-8，EITRT2019，1876-1100.
2018年发表论文：
1、张千，刘慧娟，张振洋，宋腾飞. A Cast Copper Rotor Induction Motor for Small Commercial EV Traction: Electromagnetic Design, Analysis, and Experimental Tests. CES Transactions on Electrical Machines and Systems，2018，2（4），417-424.
2、Bo Wang and Huijuan Liu. A Quantitative Comparison Analysis of Flux Modulation Permanent Magnet Machines with Four Topologies. The 2018 3rd International Conference on Electrical, Control and Automation Engineering (ECAE2018), September 27-28, 2018 in Wuhan, China.
3、Wenluan Hu, Huijuan Liu and Zhenyang Zhang. Performance Analysis of a Coreless Axial-Flux Permanent Magnet Machine with Halbach PM Arrangement. The 2018 3rd International Conference on Electrical, Control and Automation Engineering (ECAE2018), September 27-28, 2018 in Wuhan, China.
2017年发表论文：
1. Liu, Huijuan; Hao, Yue; Fu, Weinong. Performance comparison of axial-flux-modulated motor with two pole-slot combinations. TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES, 2017, Vol. 25, No.1, pp: 484-496.（SCI）
2. Huijuan Liu, Tengfei Song, Qian Zhang and Zhenyang Zhang. Performance evaluation and experimental analysis of a novel single-phase brushless PM motor. IEEJ Transactions on Electrical and Electronic Engineering, July, 2017, Vol. 12, No.6, pp: 952-958.（SCI）
3. Huijuan Liu, Zhenyang Zhang, Tengfei Song. Case study of enquiry-based learning designed for rotating magnetic fields in electric machinery course. International Journal of Electrical Engineering Education, Feb. 2017, Vol. 54, No.4, pp: 341-353.（SCI）
2016年发表论文：
1.Liu Huijuan, Wang Jun, Zhang Zhenyang. Performance analysis of variable speed multiphase induction motor with pole phase modulation. Archives of Electrical Engineering, September 1, 2016, Vol. 65, No. 3, pp: 425-436.（EI-JA）
2. 宋腾飞，刘慧娟，张千，张振洋. 永磁无刷单相电机场路耦合有限元仿真与实验研究. 机电工程，2016，Vol.33，No.11, pp: 104-109. （EI-JA）
3. Zhang Zhenyang, Liu Huijuan, Song Tengfei. Optimization Design and Performance Analysis of a PM Brushless Rotor Claw Pole Motor with FEM. Machines, 2016, Vol.15, No.3, pp: 1-9
4. Zhang Zhen Yang ; Liu Hui Juan ; Hao Yue ; Fu Wei Nong . Performance analysis of a PM brushless rotor claw pole motor using 3D FEM. Proceedings of 2015 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), November 20-23, 2015, Shanghai, China, pp: 470 - 471.
5. Hui Juan Liu; Yue Hao; Shuang Xia Niu; Jing Xiong Zhang. Performance simulation of flux modulation permanent magnet machines with three topologies. Proceedings of 2015 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), November 20-23, 2015, Shanghai, China, pp: 464 - 465.
2015年发表论文：
1、Huijuan Liu, Yue Hao, Shuangxia Niu, Weinong Fu. Computation of Electromagnetic Losses in Double-Rotor Vernier PM Motors with Three Topologies Using TS-FEM. INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING-IREE.Vol.10, No.1, 2015, pp：22-27.
2、Huijuan Liu, Yue Hao, Zhenyang Zhang, Weinong Fu. Performance Comparative Analysis of Flux-Modulated PM Machine with Two topologies for Low-Speed Drive. INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING-IREE.Vol.10, No.3, 2015, pp：344-351.
3、Huijuan Liu,*, Yiduan Chen, Yue Hao, and Weinong Fu. Design and Analysis of a Low-Speed Double-Fed Brushless Generator with Fractional Slot Windings. International Journal of Electrical Engineering. Vol.22, No.2, 2015, pp：45-51. (EI，JA，No.20**9)
4、H. J. Liu; Y. Hao; Z. Y. Zhang; W. N. Fu, Investigation and analysis of amorphous magnetic materials for hybrid-flux-modulated motor, Materials Research Innovations，Volume 19, Issue S10 (December, 2015), pp. 424-430.(EI，JA，No.20**0)
2014年发表论文：
1. 刘慧娟,王俊,郝越,傅为农. 求解时步有限元系统方程的改进非线性算法. 电机与控制学报, VOL.18, No.9, 2014, pp:74-79 (EI JA)
2、刘慧娟，郝越，王俊，傅为农，Analysis of Low-Speed Magnetic Flux Modulated Doubly-Fed Brushless Generator with Different Types of Fractional-Slot Windings；ENERGY EDUCATION SCIENCE AND TECHNOLOGY, PART A Energy Science and Research，ISSN:1308-772x；Vol.32, No.5; 2014-9, pp3193-3202. (EI JA)
3、刘慧娟，郝越，陈财，傅为农, Comparison Study of Two Topologies Double-Fed Brushless Machine with Fractional Slot Windings for Low-Speed Applications ENERGY EDUCATION SCIENCE AND TECHNOLOGY, PART A Energy Science and Research，ISSN:1308-772x；Vol.32, No.5; 2014-9, pp3299-3308. (EI JA)
4、Haijiao Zhang；Huijuan Liu; Ruifang Liu; Shuangxia Niu, Simulation Study of High-Frequency Circulating Bearing Currents of 300kW Induction Motor Source: Applied Mechanics and Materials, v 448-453, 2014, pp:2109-2113.（EI，JA， No.**）
5. Chen Yiduan; Liu Huijuan; Zhang Jingxiong. Structure optimization and performance analysis of SRM with amorphous alloys core using FEM. Sensors and Transducers, Vol.162, No.1, 2014, pp:273-279.(EI, JA, No.20**6)
6. Zhang Jingxiong; Liu Huijuan; Chen Yiduan. Transient simulation study of slip-frequency vector control for variable speed doubly-fed brushless motor with magnetic barrier rotor.Sensors and Transducers, Vol.162,No.1, 2014, pp: 258-265. (EI, JA, No.20**4)
7、Jun Wang, Huijuan Liu, Cai Chen, Weinong Fu; Performance Comparison Analysis of a Squirrel-cage Rotor Induction Motor with Different Rotor Structures; Sensors & Transducers, Vol. 183, Issue 12, Dec. 2014, pp.209-214
8、Yue Hao, Huijuan Liu, Jun Wang; Performance Comparison of Two Topologies Double-Fed Brushless Machine with 36 slots for Low-Speed Applications; Sensors & Transducers, Vol. 183, Issue 12, Dec. 2014, pp.215-220
2013年发表论文：
1. Liu Huijuan, ZhangHaijiao, Zhang Jingxiong. PM design of IPMSM using parameterized finite element model. Telkomnika, Vol.11, No.12, 2013, pp. 7072-7080.(EI检索, An5)
2. Zhao Xiang, Liu Huijuan, Zhang Jingxiong, Zhang Haijiao. Simulation of field oriented control in induction motor drive system. Telkomnika, Vol.11, No.12, 2013, pp. 7555-7563.(EI检索, An5)
3. 刘慧娟，张竞雄，陈艺端，傅为农. 二维涡流磁场等效电路的矩阵分析方法. 电工技术学报，Vol.28, No.6, 2013, pp. 73-80.(EI检索, An5)
Liu Huijuan; Zhang Jingxiong; Chen Yiduan; Fu W.N. Matrix analysis method of equivalent circuit in 2-D eddy-current magnetic field. Diangong Jishu Xuebao/Transactions of China Electrotechnical Society, Vol.28, No.6, 2013, pp. 73-80.
4. 刘慧娟，傅为农.永磁电机动态退磁的时步有限元计算.沈阳工业大学学报(Journal of Shenyang University and Technology), Vol.35, No.3, 2013, pp. 257-262.
LIU Hui-juan，FU Wei-nong. Time-Stepping Finite Element Computation for Dynamic Demagnetization of Permanent Magnet Motors. Journal of Shenyang University and Technology. Vol.35, No.3, 2013, pp. 257-262.
2011与2012发表论文：
[1] 刘慧娟，傅为农.薄壳单元法在接触物体间电磁力计算中的应用. 电机与控制学报(Electric Machines and control), Vol.16, No.8, 2012, pp.101-106.(EI检索, An5)
LIU Hui-juan，FU Wei-nong. Computation of Electromagnetic Force on the Interface using Shell Element Method. Electric Machines and control, Vol.16, No.8, 2012, pp.101-106.
[2] 刘慧娟，傅为农. 一种参数化网格剖分方法及其在电机优化设计中的应用. 中国电机工程学报(Proceedings of the CSEE), Vol.32, No.21, 2012, pp. 125-130.
LIU Hui-juan，FU Wei-nong. A Parameterized Mesh Generation and Refinement Method for Finite Element Magnetic Field Computation and its Application to Optimal Designs of Electric Motors. Proceedings of the CSEE. Vol.32, No.21, 2012, pp. 125-130.
[3] Huijuan Liu, Longya Xu. Finite Element Analysis of 1MW High Speed Wound-Rotor Synchronous Machine; IEEE Transactions on Magnetics, Vol. 48, No. 11, November 2012, pp. pp.4650-4653..(SCI检索, An3)
[4] 刘慧娟, Longya Xu, 一种径向叠片磁障式转子双馈无刷电机的设计与性能分析. 电工技术学报(Transactions of China Electrotechnical Society ), Vol.27, No.7, 2012, pp.55-62.(EI检索, An5)
Huijuan Liu, Longya Xu. Design and Performance Analysis of a Doubly Excited Brushless Machine with Radially Laminated Magnetic Barrier Rotor. Transactions of China Electrotechnical Society. Vol.27, No.7, 2012, pp.55-62.
[5] 刘慧娟，傅为农. 基于瞬态有限元永磁同步电机静止位置检测策略. 北京交通大学学报(Journal of Beijing Jiaotong University), Vol.36, No.5, 2012, pp.1-6.
LIU Hui-juan，FU Wei-nong. Position Detection Strategy of Permanent Magnet Synchronous Motors at Standstill Using Transient Finite Element Analysis , Vol.36, No.5, 2012, pp.1-6. （in Chinese）
[6]Yingchao Zhang, Huijuan Liu, Performance Analysis of Doubly Excited Brushless Generator with Outer Rotor for Wind Power Application. TELKOMNIKA, Indonesia Journal of Electrical Engineering. Vol.10, No.3, July 2012, pp.471-476..(EI检索, An5)
[7] 翟秀果，刘慧娟，张颖超，罗淑元. PMSM极弧系数对感应电势和漏磁系数的影响. 微电机，2012.5, Vol.45, No.5, pp.4-6.
Xiuguo Zhai, Huijuan Liu, Yingchao Zhang, Polar arc coefficient on EMF and flux leakage coefficient of PMSM. Micromotors, May 2012, Vol.45, No.5, pp.4-6.
[8] Zuo, Zhongfeng，Liu, Huijuan; Zhao, Xiang; Zhang, Hai Jiao; Chen, Yi Duan. A comparative analysis for a flux-modulated permanent-magnet motor with an improved structure; Proceedings of the 2nd International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2012, p 1659-1662, 2012,
[9] Zhao, Xiang; Liu, Huijuan; Zuo, Zhongfeng; Zhang, Haijiao; Chen, Yiduan. Co-simulation of 600KW traction induction motor fed by PWM inverter; Proceedings of the 2nd International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2012, p 1680-1683, 2012,
[10] Chen, Yiduan; Liu, Huijuan; Zhao, Xiang; Zhang, Haijiao; Zuo, Zhongfeng. Field-circuit coupled analysis of an in-wheel switched reluctance motor with outer rotor for EV applications; Proceedings of the 2nd International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2012, p 1689-1692, 2012,
[11] Shangguan, Mingzhu; Liu, Huijuan; Qian, Zhang. Radial laminated magnetic-barrier rotor optimization design of brushless doubly-fed machine; Advanced Materials Research, v 383-390, p 2195-2200, 2012,
[12] Liu, Huijuan; Xu, Longya. Performance analysis of doubly excited brushless machine with radially laminated magnetic barrier rotor; Advanced Materials Research, v 383-390, p 1837-1843, 2012,
[13] Huijuan Liu, Longya Xu. Performance Analysis of a Doubly Excited Brushless Machine for Variable Speed Application；International Conference on Electrical Machines and Systems, 2011, ICEMS 2011, Beijing, China, 20-23 Nov. 2011. pp.1-4.
[14] Huijuan Liu, Longya Xu, Mingzhu Shangguan1. Finite Element Method Simulation of a High Speed Wound-Rotor Synchronous Machine, International Conference on Electrical Machines and Systems, 2011, ICEMS 2011, Beijing, China, 20-23 Nov. 2011. pp.1-4.
[15] Mingzhu Shangguan, Huijuan Liu, Xiuguo Zhai, Yingchao Zhang. Radial Force Comparison of Radial Laminated Magnetic-Barrier Rotor Brushless Doubly-Fed Machine with Different Rotor Pole Numbers, International Conference on Electrical Machines and Systems, 2011, ICEMS 2011, Beijing, China, 20-23 Nov. 2011. pp.1-4.
[16] Mingzhu Shangguan, Huijuan Liu. Radial Force Analysis of Radial Laminated Magnetic-Barrier Rotor Brushless Doubly-Fed Machine. International Conference on Engineering Materials, Energy, Management and Control, JAN 22-23, 2011 Beijing, China, Vol.1 pp.454-457.
[17] 赵铮，刘慧娟. 径向叠片磁阻转子无刷双馈电机的电磁场及温度场分析. 2011.3. 微电机, Vol.44 No.3,pp13-16.
Before 2010:
[1] 张千，刘慧娟. 径向叠片磁障转子无刷双馈电机有限元分析. 微特电机, 2010.1. pp.18-20.
Zhang qian, Liu huijuan. Analysis of a Novel Brushless Doubly Fed Machine with Radial Laminated Reluctance Rotor Based on Finite Element Method. SMALL＆SPECIAL ELECTRICAL MACHINES, Jan. 2010, No.1, pp.18-20. in Chinese）
[2] Liu huijuan, Xu longya. Analysis of doubly excited brushless machine with radially laminated magnetic barrier rotor. 2010 2nd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG2010), Hefei, China, May 2010. （in English）
[3] Liu huijuan, Xu longya. Design and performance analysis of a doubly excited brushless machine for wind power generator application. 2010 2nd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG2010), Hefei, China, May 2010. （in English）
[4] Qian Zhang; Huijuan Liu. Comparative Study of Brushless Doubly Fed Machine with Different Rotor Structures Used in Wind Power Generation System. 2010 Asia-Pacific Power and Energy Engineering Conference (APPEEC2010), Chengdu, China, March 2010. （in English）
[5] Mingzhu Shangguan, Huijuan Liu, Qian Zhang. Radial Laminated Magnetic-Barrier Rotor Optimization Design of Brushless Doubly-Fed Machine. The International Conference on Electrical Engineering and Automatic Control (ICEEAC2010) Zibo China, November26-28, 2010, Vol.2, pp.122-125. （in English）
[6] Huijuan Liu, Longya Xu. Performance Analysis of Doubly Excited Brushless Machine with Radially Laminated Magnetic Barrier Rotor. The International Conference on Electrical Engineering and Automatic Control (ICEEAC2010) Zibo China, November26-28, 2010, Vol.5, pp.233-236. （in English）
[7] 梅业伟，刘慧娟. 基于多电平逆变器通用数字控制平台的研究. 机械与电子,2009, No.4. pp.56-58.
MEI Ye-wei, LIU Hui-juan, QIU Rui-chang, CHENG Qiang. Research on a Universal Digital Control Platform Based on the Multi- level Inverter. MACHINERY & ELECTRONICS, 2009, No.4, pp.56-58.（in Chinese）
[8] 夏正泽，刘慧娟. 基于场路耦合法的异步牵引电机电磁场分析. 微电机, 2009. Vol.42, No.3, pp.21-23.
Xia zhengze, Liu huijuan. Analysis of Electromagnetic Field of Asynchronous Traction Motor Based on Field-circuit Coupled Method. Micromotors, March 2009, Vol.42, No.3, pp.21-23. （in Chinese）
[9] Huijuan Liu. Longya Xu. Theoretical Analysis of Doubly Excited Brushless Reluctance Machine Used in Wind Power Generation System. The First International Conference on Sustainable Power Generation and Supply (SUPERGEN). Nanjing, China, April 2009. （in English）
[10] Huijuan Liu. Longya Xu. “Performance Analysis of Doubly Excited Brushless Reluctance Machine used in Wind Power Generation System” Asia-Pacific Power and Energy Engineering Conference (APPEEC2009) ,Wuhan China.27-31 Mar. 2009. pp.1-4. （in English）
[11] Huijuan Liu. Longya Xu. “Comparison study of Doubly Excited Brushless Reluctance Machine with different rotor pole numbers” Power Electronics and Motion Control Conference, 2009. IPEMC '09. IEEE 6th International, Wuhan China. 17-20 May 2009. pp.830-835. （in English）
[12] Huijuan Liu. Yihuang Zhang. Longya Xu. “Theoretical Analysis of Doubly Excited Brushless Reluctance Machine Used in Wind Power Generation System” The First International Conference on Sustainable Power Generation and Supply (SUPERGEN). Nanjing, China, 6-7 April 2009. （in English）
[13] Liu Huijuan, Xia Zhengzhe, Zhang Yihuang. “Analysis of Electromagnetic Field and Performance on Traction Motor for Variable Speed Drive”. International Conference on Electrical Machines and Systems, 2008, ICEMS 2008, Wuhan, China, 17-20 Oct. 2008. pp.413- 416. （in English）
[14] Liu Huijuan, Zhang Yihuang, Xia Zhengzhe. “Design and Simulation of A Traction Motor for Variable Speed Drive”. International Conference on Electrical Machines and Systems, 2008, ICEMS 2008, Wuhan, China, 17-20 Oct. 2008. pp.128-131. （in English）
[15] Liu Huijuan, Zhang Yihuang. “Design and Simulation of A Inverter-fed Induction motor for Electric Vehicles”. IEEE Conference on Vehicle Power and Propulsion, 2007. VPPC 2007. Arlington, Texas, USA, 9-12 Sept. 2007, pp.112-115. （in English）
[16] 刘慧娟. 一种快速响应码图像的分割和校正方法. 电子测量与仪器学报, 2006, Vol.20, No.1, pp.32-35.
Liu Huijuan. Location and Segmentation of Quick Response Code Image. JOURNAL OF ELECTRONIC MEASUREMENT AND INSTRUMENT. 2006,Vol.20, No.1, pp.32-35.（in Chinese）
[17] 刘慧娟. 快速响应码图像的全方位识别. 仪器仪表学报, 2006, Vol.27, No.4, pp.376-379.(EI检索, An5)
Liu Huijuan. “Omnidirectional Quick Recognition of Quick Response Code Image”, Chinese Journal of Scientific Instrument, Vol. 27, No. 4, 2006. pp.376-379.（in Chinese）
[18] 刘慧娟, 李志刚. 一种基于电压和频率的金属探测方法. 仪器仪表学报, Vol.27, No.7, 2006, pp.769-772.(EI检索, An5)
Liu Huijuan, Li Zhigang. Metal detection method based on voltage and frequency. Chinese Journal of Scientific Instrument, Vol.27, No.7, 2006, pp.769-772.（in Chinese）
[19] Liu Huijuan, Zhang Changshuan. “Design of an inverter-fed high-speed actuating moter”. Proceedings of the Eighth International Conference on Electrical Machines and Systems, 2005. ICEMS 2005. Vol. 2, Nanjing, China, 27-29 Sept. 2005, pp.883-885. （in English）
[20] 刘慧娟, 张奕黄,葛宝明. 基于PSPICE的电动汽车用开关磁阻电动机建模与仿真. 电工技术学报, Vol.20, No.4, 2005, pp.68-72.
Liu Huijuan, Zhang Yihuang etc. “Pspice-Based Modeling and Simulation of SRM Applied to Electric Vehicles”, Transactions of China Electrotechnical Society, Vol.20, No.4, Apr. 2005. pp.68-72.（in Chinese）
[21] 刘慧娟，张奕黄. 一种嵌入式高速调制解调器的设计. 仪器仪表学报, Vol.25, No.4, 2004, pp.506-507.
Liu Huijuan, Zhang Yihuang. “Design of Embedded High Rate Dial-Up Modem”, Chinese Journal of Scientific Instrument, Vol.25, No. 4, 2004. pp.506-507.（in Chinese）
[22] 刘慧娟，张奕黄. 嵌入式系统中闪存数据完整性处理方法. 仪器仪表学报, Vol.25, No.4, 2004, pp.370-371.
Liu Huijuan, Zhang Yihuang. “Integrity Processing of Data in Flash ROMs Of Embedded Systems ”, Chinese Journal of Scientific Instrument, Vol.25, No. 4, 2004. pp.370-371.（in Chinese）
[23] 刘慧娟，张奕黄. 一种数字式金属探测器的设计. 仪器仪表学报, Vol.25, No.4, 2004, pp.362-363.
Liu Huijuan, Zhang Yihuang. “Design of A Digial Versatile Metal Detector”, Chinese Journal of Scientific Instrument, No. 4, 2004. pp.362-363.（in Chinese）
[24] 刘慧娟，张奕黄. 磁悬浮列车中直线发电机电枢绕组电阻和电感的计算. 北方交通大学学报, Vol.27, No.4, 2003, pp.94-96.
Liu Hui-juan, Zhang Yi-huang. “Calculation of armature resistance and inductance of linear generator used in magnetic levitation vehicle”, Journal of Northern Jiaotong University, Vol.27, No.4, 2003. pp.94-96.（in Chinese）
[25] 刘慧娟，汤钰鹏, 徐建军. 锅炉供暖系统的自动化节能控制. 仪器仪表学报, Vol.24, No.4, 2003, pp.654-656.
Liu Hui-juan, Tang Yu-peng,Xu Jianjun.The Automatic Energy Saving Control for Boiler Heating System. Chinese Journal of Scientific Instrument, Vol.24, No.4, 2003, pp.654-656.（in Chinese）
[26] 刘慧娟，张奕黄. 磁悬浮列车中直线发电机感应电动势的计算. 电机与控制学报, Vol.6, No.3, 2002, pp.191-194.
Liu Hui-juan, Zhang Yi-huang. “Calculation of electromotive force induced by the slot harmonics and parameters of the linear generator”, Electric Machine and Control, Vol.6, No.3, Sep. 2002. pp.191-194.（in Chinese）
[27] 刘慧娟.一种控制软件运行权限的智能加密锁的设计，北方交通大学学报, 2002, Vol.26, No.4, pp.88-91.
Liu Hui-juan. Design of an encryption lock for control software operation. Journal of Northern Jiaotong University, Vol.26, No.4, 2002. pp.88-91.（in Chinese）
[28] 刘慧娟，张奕黄. 基于Windows平台的风力异步发电机的视窗设计系统,中小型电机, 2002. Vol. 29, No.4, pp.5-7.
Liu Huijuan, Zhang Yihuang. “Visual Window Design System for Wind-driven Asynchronous Generator Based on Windows Platform”, Small and Medium Electric Machine, Vol. 29, No.4, 2002. pp.5-7.（in Chinese）
[29] 刘慧娟.一种新型智能金属探测器. 北方交通大学学报,2001, Vol.25, No.1, pp.95-99.
Liu Hui-juan. A new intelligent Metal Detector. Journal of Northern Jiaotong University, Vol.25, No.1, 2001. pp.95-99.（in Chinese）


工作经历：1994.03至今：北京交通大学电气工程学院执教，从事电机设计与控制相关的教学与科研工作。
2008.02—2008.09：美国俄亥俄州立大学（The Ohio State University, Cloumbus,USA）Longya Xu教授的实验室做访问,从事无刷双馈电机与高速同步电机的研究工作，
2009.12：北京交通大学获工学博士学位
2011.05—2011.11：应邀到香港理工大学电机工程系做Research Fellow, 从事横向磁场电机的设计、电磁场计算等研究工作
2013.07—2013.08：应邀到香港理工大学电机工程系做Research Fellow.
获奖荣誉：1.2015年、2017年被聘为第一批和第二批教学促进师
2.2013年被评为北京交通大学教学名师
3.2008年获北京市教育创新标兵
4.2007年荣获北京交通大学红果园奖
5.2007年荣获北京交通大学优秀教师荣誉称号
6.2007年获北京市第五届青年教师教学基本功比赛一等奖，并最佳演示奖.
7.2007年获北京交通大学第六届青年教师教学基本功比赛一等奖.
8.2002年获北京交通大学优秀主讲教师称号.
9.2002年获北京交通大学德育津贴一等奖.
10.2003年获北京交通大学德育津贴一等奖.