姓名：蒋敏强
性别：男
职称：研究员/博导
学历：研究生(Ph.D)
电话：
传真：
电子邮件:mqjiang@imech.ac.cn
通讯地址北京市北四环西路15号，中国科学院力学研究所，非线性力学国家重点实验室

简历：2017.10-至今 研究员，中国科学院力学研究所/非线性力学国家重点实验室
2011.12-2017.10副研究员（2017.01，博导），中国科学院力学研究所/非线性力学国家重点实验室
2015.01-至今 岗位教授，中国科学院大学/工学院
2013.06-2014.12 洪堡****，德国明斯特大学/材料物理所
2009.07-2011.11 助理研究员，中国科学院力学研究所/非线性力学国家重点实验室
2005.09-2009.06 中国科学院力学研究所，固体力学，获理学博士学位
2002.09-2005.06 扬州大学，水工结构工程，获工学硕士学位
1998.09-2002.06 扬州大学，农业水土工程，获工学学士学位

研究领域： 固体力学
冲击动力学
非晶塑性
极端条件下新型材料的力学行为
混凝土海水侵蚀


指导研究生：孙星（硕博连读生，2014级）、杨杰（硕士生，2015级，2018.6毕业）、宋璇（硕博连读生，2016级）、丁淦（硕博连读生，2015级，与西交大联合培养）、段军（硕士生，2017级）、王晓娟（硕士生，2018级）、杨成（硕士生，2018级）
招生：每年招收1-2名研究生，需有力学、材料、物理知识背景。欢迎博士后应聘！

社会任职： 德国物理学会会员
所学位委员会委员
评审专家：国家科技部、教育部学位与研究生教育发展中心、北京市科学技术委员会、国家自然科学基金委
期刊审稿人：中国科学（E辑，G辑）、物理学报、中国物理快报；The Journal of Mechanics and Physics of Solids, International Journal of Plasticity, Nature Communication, Physical Review Applied,Proceedings of the Royal Society A, Philosophical Magazine, Scitific Reports, International Journal of Impact Engineering, etc.
获奖及荣誉： 2017年，中国科学院，青年创新促进会优秀会员
2015年，国家优秀青年科学基金获得者
2013年，德国洪堡基金会，洪堡****奖学金
2013年，中国科学院，青年创新促进会会员
2012年，中国科学院，卢嘉锡青年人才奖
2012年，北京大学王仁基金会，王仁塑性力学优秀论文奖
2011年，全国百篇优秀博士学位论文提名奖
2010年，中国科学院，优秀博士学位论文
2009年，中国科学院力学研究所，郭永怀奖
2009年，中国科学院，院长奖
2008年，英国《哲学杂志》和麦克斯韦基金会，麦克斯韦青年作者奖
代表论著：
1. F. Zeng, M.Q. Jiang, L.H. Dai, Dilatancy-induced ductile-brittle transition of shear banding in metallic glasses, Proceeding of the Royal Society A 474, **(2018).
2. Y.Z. Lu, M.Q. Jiang, X. Lu, Z.X. Qin, Y.J. Huang, J. Shen, Dilatancy of shear transformations in a colloidal glass, Physical Review Applied 9, 014203(2018).
3. G.G. Ye, M.Q. Jiang, S.F. Xue, W. Ma, L. H. Dai, On the instability of chip flow in high-speed machining, Mechanics of Materials 116, 104-119 (2018).
4. H. Huang, M.Q. Jiang, J.W. Yan, Softening of Zr-based metallic glass induced by nanosecond pulsed laser irradiation, Journal of Alloys and Compounds 754, 215-221 (2018).
5. M.Q. Jiang, M. Peterlechner, Y.J. Wang, W.H. Wang, F. Jiang, L.H. Dai, G. Wilde, Universal structural softening in metallic glasses indicated by boson heat capacity peak, Applied Physics Letters 111, 261901 (2017).
6. B. Y. Cui, J. Yang, J. C. Qiao, M. Q. Jiang, L. H. Dai, Y. J. Wang, A. Zaccone, Atomic theory of viscoelastic response and memory effects in metallic glass, Physical Review B 96, 094203 (2017).
7. X. Sun, G. Mo, L.Z. Zhao, L.H. Dai, Z.H. Wu, M.Q. Jiang, Characterization of nanoscale structural heterogeneity in an amorphous alloy by synchrotron small angle X-ray scattering, Acta Physica Sinica 66, 176109 (2017). [in Chinese]
8. M.Q. Jiang, L.H. Dai, The "tension transformation zone" model of amorphous alloys, Chinese Science Bulletin 62, 2346-2357 (2017). [in Chinese]
9. M.Q. Jiang, X.Q. Wu, Y.P. Wei, G. Wilde, L.H. Dai, Cavitation bubble dynamics during pulsed laser ablation of a metallic glass in water. Extreme Mechanics Letters 11, 24-29 (2017).
10. M.Q. Jiang, G. Wilde, L.H. Dai, Shear band dilatation in amorphous alloys, Scripta Materialia 127, 54-57 (2017).
11. M.C. Li, M.Q. Jiang, F. Jiang, L. He, J. Sun, Testing effects on hardness of a Zr-based metallic glass under nanoindentation, Scripta Materialia 138, 120-123 (2017).
12. M.C. Li, M.Q. Jiang, G. Ding, Z.H. Peng, F. Jiang, L. He, J. Sun, The correlation between weakest configurations and yield strength of Zr-based metallic glasses, Journal of Non-Crystalline Solids 468, 52-57 (2017).
13. M.C. Li, M.Q. Jiang, S. Yang, F. Jiang, L. He, J. Sun, Effect of strain rate on yielding strength of a Zr-based bulk metallic glass, Materials Science & Engineering A 680, 21-26 (2017).
14. X.F. Liu, Y. Chen, M.Q. Jiang, P.K. Liaw, L.H. Dai, Turning plasticity of in-situ dendrite metallic glass composites via the dendrite-volume-fraction-dependent shear banding, Materials Science & Engineering A 680, 121-129 (2017).
15. H. Huang, N. Jun, M.Q. Jiang, M. Ryoko, J.W. Yan, Nanosecond pulsed laser irradiation induced hierarchical micro/nanostructures on Zr-based metallic glass substrate, Materials & Design 109, 153-161 (2016).
16. M.C. Li, M.Q. Jiang, G. Li, L. He, J. Sun, F. Jiang, Ductile to brittle transition of fracture of a Zr-based bulk metallic glass: Strain rate effect, Intermetallics 77, 34-40 (2016).
17. Y. J. Wang, M.Q. Jiang, Z.L. Tian, L.H. Dai, Direct atomic-scale evidence for shear-dilatation correlation in metallic glasses, Scripta Materialia 112, 37-41 (2016).
18. M.Q. Jiang, M. Naderi, Y.J. Wang, M. Peterlechner, X.F. Liu, F. Zeng, F. Jiang, L.H. Dai, G. Wilde, Thermal expansion accompanying the glass-liquid transition and crystallization, AIP Advances 5, 127133 (2015).
19. M.Q. Jiang, G. Wilde, F. Jiang, L.H. Dai, Understanding ductile-to-brittle transition of metallic glasses from shear-transformation-zone dilatation, Theoretical and Applied Mechanics Letters 5, 200-204 (2015).
20. M.Q. Jiang, Y.P. Wei, G. Wilde, L.H. Dai, Explosive boiling of a metallic glass superheated by nanosecond pulse laser ablation, Applied Physics Letters 106, 021904 (2015).
21. G. Li, M.Q. Jiang, F. Jiang, L. He, J. Sun,The ductile to brittle transition behavior in a Zr-based bulk metallic glass, Materials Science & Engineering A 625, 393-402 (2015).
22. M.Q. Jiang, G. Wilde, L.H. Dai, Origin of stress overshoot in amorphous solids, Mechanics of Materials 81, 72-83 (2015).
23. M.Q. Jiang, B.M. Huang, Z.J. Jiang, C. Lu, L.H. Dai, Joining of bulk metallic glass to brass by thick-walled cylinder explosion, Scripta Materialia 97, 17-20 (2015).
24. J.H. Chen, Y. Chen, M.Q. Jiang, X.W. Chen, H.F. Zhang, L.H. Dai, On the compressive failure of tungsten fiber reinforced Zr-based bulk metallic glass composite, International Journal of Solids and Structures,69-70, 428-441(2015).
25. J.H. Chen, Y. Chen, M.Q. Jiang, X.W. Chen, H.M. Fu, H.F. Zhang, L.H. Dai, Dynamic shear punch behavior of tungsten fiber reinforced Zr-based bulk metallic glass matrix composites, International Journal of Impact Engineering 79, 22-31 (2015).
26. F. Zeng, Y. Chen, M.Q. Jiang, L.H. Dai, Dynamic fragmentation induced by network-like shear bands in a Zr-based bulk metallic glass, Intermetallics 56, 96-100 (2015).
27. S.L. Cai, Y. Chen, G.G. Ye, M.Q. Jiang, H.Y. Wang, L.H. Dai, Characterization of the deformation field in large-strain extrusion machining, Journal of Materials Processing Technology 216, 48-58 (2015).
28. M.Q. Jiang, G. Wilde, C.B. Qu, F. Jiang, H.M. Xiao, J.H. Chen, S.Y. Fu, L.H. Dai, Wavelike fracture pattern in a metallic glass: a Kelvin-Helmholtz flow instability, Philosophical Magazine Letters 94, 669-677 (2014).
29. Z.Q. Liu, W.H. Wang, M.Q. Jiang, Z.F. Zhang, Intrinsic factor controlling the deformation and ductile-to-brittle transition of metallic glasses, Philosophical Magazine Letters 94, 658-668 (2014).
30. J.H. Chen, Y. Chen, M.Q. Jiang, X.W. Chen, H.M. Fu, H.F. Zhang, L.H. Dai, Direct observation on the evolution of shear banding and buckling in tungsten fiber reinforced Zr-based bulk metallic glass composite, Metallurgical and Materials Transactions A 45A, 5397-5408 (2014).
31. M.Q. Jiang, G. Wilde, J.H. Chen, C.B. Qu, S.Y. Fu, F. Jiang, L.H. Dai, Cryogenic-temperature-induced transition from shear to dilatational failure in metallic glass, Acta Materialia 77, 248-257(2014).
32. M.Q. Jiang, Advances in plasticity theory for amorphous alloys, Materials China 33, 257-264 (2014). [in Chinese]
33. W.Y. Ouyang, J.K. Chen, M.Q. Jiang, Evolution of surface hardness of concrete under sulfate attack,Construction and Building Materials 53, 419-424 (2014).
34. M.Q. Jiang, G. Wilde, J.B. Gao, L.H. Dai, A universal power law for metallic glasses, Scripta Materialia 69, 759-762 (2013).
35. Y. Chen, M.Q. Jiang, L.H. Dai, Collective evolution dynamics of multiple shear bands in bulk metallic glasses, International Journal of Plasticity 50, 18-36 (2013).
36. G. Li, M.Q. Jiang, F. Jiang, L. He, J. Sun, Temperature-induced ductile-to-brittle transition of bulk metallic glasses, Applied Physics Letters 102, 171901 (2013).
37. J.H. Chen, M.Q. Jiang, Y. Chen, L.H. Dai, Strain rate dependent shear banding behavior of a Zr-based bulk metallic glass composite, Materials Science and Engineering A 576,134-139 (2013).
38. N. Li, Y. Chen, M.Q. Jiang, D.J. Li, J.J. He, Y. Wu, L. Liu, A thermoplastic forming map of a Zr-based bulk metallic glass, Acta Materialia 61, 1921-1931 (2013).
39. G.G. Ye, S.F. Xue, M.Q. Jiang, X.H. Tong, L.H. Dai, Modeling periodic adiabatic shear band evolution during high speed machining Ti-6Al-4V alloy, International Journal of Plasticity 40, 39-55 (2013).
40. M. Q. Jiang, F, Jiang, V. Keryvin, J. X. Meng, J. Sun, and L. H. Dai, Relation between ideal and real strengths of metallic glasses, Journal of Non-Crystalline Solids 358, 3119-3213 (2012).
41. Y. Liu, M.Q. Jiang^*, G.W. Yang, J. H. Chen, Y.J. Guan, L.H. Dai, Saffman-Taylor fingering in nanosecond pulse laser ablating bulk metallic glass in water, Intermetallics 31, 325-329 (2012).
42. Y. Chen, M.Q. Jiang, L.H. Dai, Temperature-dependent yield asymmetry between tension and compression in metallic glasses, Acta Physics Sinica 61, 036201 (2012).
43. F. Jiang, H.F. Wang, M.Q. Jiang, G. Li, Y.L. Zhao, L. He, J. Sun, Ambient temperature embrittlement of a Zr-based bulk metallic glass, Materials Science and Engineering A 549, 14-19 (2012).
44. G.G. Ye, S.F. Xue, W. Ma, M.Q. Jiang, Z. Ling, X.H. Tong, L.H. Dai, Cutting AISI 1045 steel at very high speeds, International Journal of Machine Tools & Manufacture 56, 1-9 (2012).
45. M.Q. Jiang, L.H. Dai, Shear-band toughness of bulk metallic glasses, Acta Materialia 59, 4525-4537 (2011).
46. Y. Liu, M.Q. Jiang, G.W. Yang, Y.J. Guan, L.H. Dai, Surface rippling on bulk metallic glass under nanosecond pulse laser ablation, Applied Physics Letters 99, 191902_1-3 (2011).
47. F. Jiang, M.Q. Jiang, H.F. Wang, Y.L. Zhao, L. He, J. Sun, Shear transformation zone volume determining ductile-brittle transition of bulk metallic glasses, Acta Materialia 59, 2057-2068 (2011).
48. Y. Chen, M.Q. Jiang, Y.J. Wei, L.H. Dai, Failure criterion for metallic glasses, Philosophical Magazine 91, 4536-4554 (2011).
49. M.Q. Jiang, G.H. Duan, L.H. Dai, Metallic glass nanofilms, Journal of Non-Crystalline Solids 357, 1621-1627 (2011).
50. M.Q. Jiang, J.X. Meng, V. Keryvin, L.H. Dai, Crack branching instability and directional stability in dynamic fracture of a tough bulk metallic glass, Intermetallics 19, 1775-1779 (2011).
51. Y. Chen, M.Q. Jiang, L.H. Dai, How does the initial free volume distribution affect shear band formation in metallic glass? Science China-Physics Mechanics & Astronomy 54, 1488-1494 (2011).
52. M.Q. Jiang, Z. Ling, J.X. Meng, J.B. Gao, L.H. Dai, Nanoscale periodic corrugation to dimple transition due to “beat” in a bulk metallic glass, Scripta Materialia 62, 572-575 (2010).
53. M.Q. Jiang, L.H. Dai, Short-range-order effects on intrinsic plasticity of metallic glasses, Philosophical Magazine Letters 90, 269-277 (2010).
54. M.Q. Jiang, J.X. Meng, J.B. Gao, X.-L. Wang, T. Rouxel, V. Keryvin, Z. Ling, L.H. Dai, Fractals in fracture of bulk metallic glass, Intermetallics 18, 2468-2471 (2010).
55. L. Sun, M.Q. Jiang, L.H. Dai, Intrinsic correlation between dilatation and pressure sensitivity of plastic flow in metallic glasses, Scripta Materialia 63, 945-948 (2010).
56. M.Q. Jiang, L.H. Dai, On the origin of shear banding instability in metallic glasses, Journal of the Mechanics and Physics of Solids 57, 1267-1292 (2009).
57. M.Q. Jiang, L.H. Dai, Formation mechanism of lamellar chip in machining bulk metallic glass, Acta Materialia 57, 2730-2738 (2009).
58. M.Q. Jiang, W.H. Wang, L.H. Dai, Prediction of shear-band thickness in metallic glass, Scripta Materialia 60, 1004-1007 (2009).
59. M.Q. Jiang, S.Y. Jiang, Z. Ling, L.H. Dai, Smaller Deborah number inducing more serrated plastic flow of metallic glass, Computational Materials Science 46, 767-771 (2009).
60. M.Q. Jiang, S.Y. Jiang, L.H. Dai, Inherent Shear-dilatation coexistence in metallic glass, Chinese Physics Letters 26, 016103_1-4 (2009).
61. J.K. Chen, M.Q. Jiang, Long-term evolution of delayed ettringite and gypsum in portland cement mortars under sulphate erosion, Construction and Building Materials 23, 812-816 (2009).
62. M.Q. Jiang, Z. Ling, J.X. Meng, L.H. Dai, Energy dissipation in fracture of bulk metallic glasses via inherent competition between local softening and quasi-cleavage, Philosophical Magazine 88, 407-426 (2008).
63. J.X. Meng, Z. Ling, M.Q. Jiang, H.S. Zhang, L.H. Dai, Dynamic fracture instability of tough bulk metallic glass, Applied Physics Letters 92, 171909 (2008).
64. S.Y. Jiang, M.Q. Jiang, L.H. Dai, Y.G Yao, Atomic origin of rate-dependent serrated plastic flow in metallic glasses, Nanoscale Research Letters 3, 524-529 (2008).
65. J.K. Chen, M.Q. Jiang, J. Zhu, Damage evolution in cement mortar due to erosion of sulphate, Corrosion Science 50, 2478-2483 (2008).
66. M.H. Zhang, M.Q. Jiang, J.K. Chen, Variation of Flexural Strength of Cement Mortar Attacked by Sulphate Ions, Engineering Fracture Mechanics 75, 4948-4957 (2008).
67. J. Zhu, M.Q. Jiang, J.K. Chen, Equivalent model of expansion of cement mortar under sulphate erosion, Acta Mechanica Solida Sinica 21, 327-332 (2008).
68. M.Q. Jiang, L.H. Dai, Intrinsic correlation between fragility and bulk modulus in metallic glasses, Physical Review B 76, 054204(2007).
69. L.H. Dai, M.Q. Jiang, Liquid fragility and its correlation with the mechanical properties of glasses, Advances in Mechanics 27, 346-360 (2007). [in Chinese]
70. M.Q. Jiang, J.K. Chen, D.Y. Yang, Dynamic modulus of cement mortar in sulphate erosion measured by ultrasonic technique, Journal of the Chinese Ceramic Society 33, 126-132 (2005). [in Chinese]



承担科研项目情况： 1. 国家优秀青年科学基金，非晶合金的力学行为，起止日期：2016/01-2018/12，项目主持；
2. 国家自然科学基金重大项目，无序合金的塑性流动与强韧化机理，起止日期：2018/01-2022/12，骨干成员；
3. 国家重点研发计划重点专项，多场耦合下金属结构材料损伤演化行为跨尺度关联评价，起止日期：2017/07-2020/12，骨干成员；
4. 国家自然科学基金面上项目，探索非晶态合金塑性流动的结构起源，起止日期：2014/01-2017/12，项目主持；
5. 国家自然科学基金青年科学基金项目：非晶态合金动态断裂不稳定及其内在机理研究，起止日期：2011-2013，项目主持；
6. 中国科学院青年创新促进会人才专项，起止日期：2013/06-2020/06，项目主持；
7. 中国科学院前沿科学重点研究项目，新型高强金属材料剪切带的涌现与调控，起止日期：2017/01-2021/12，骨干成员。