郑采君^1,2,,
刘昕卓^1,2,,,
林品荣^1,2,
孙夫文^1,2,3,
李勇^1,2,
李建华^1,2,
王珺璐^1,2
1. 中国地质科学院地球物理地球化学勘查研究所, 河北廊坊 065000
2. 国土资源部地球物理电磁法探测技术重点实验室, 河北廊坊 065000
3. 北华航天工业学院, 河北廊坊 065000

基金项目: 国家高技术研究发展计划项目（2014AA06A610），中国地质科学院基本科研业务费专项经费（YYWF201632），国家自然科学基金项目（41504063），国家重大科学仪器设备开发专项（2011YQ050060）联合资助


详细信息

作者简介: 郑采君, 男, 1968年生, 教授级高级工程师, 主要从事地球物理电磁法仪器研制.E-mail:zhengcaijun@igge.cn

通讯作者: 刘昕卓, 女, 1991年生, 助理工程师, 主要从事地球物理仪器设计及研究.E-mail:liuxinzhuo@igge.cn

中图分类号: P631

收稿日期:2018-07-05
修回日期:2019-02-18
上线日期:2019-10-05

Design and realization of the distributed electromagnetic instrument system

ZHENG CaiJun^1,2,,
LIU XinZhuo^1,2,,,
LIN PinRong^1,2,
SUN FuWen^1,2,3,
LI Yong^1,2,
LI JianHua^1,2,
Wang JunLu^1,2
1. Institute of Geophysical and Geochemical Exploration, Chinese Academy of Geological Science, Langfang Hebei 065000, China
2. Laboratory of Geophysical Electromagnetic Probing Technologies, Ministry of Land and Resources, Langfang Hebei 065000, China
3. North China Institute of Aerospace Engineering, Langfang Hebei 065000, China


More Information

Corresponding author: LIU XinZhuo,E-mail:liuxinzhuo@igge.cn

MSC: P631

--> Received Date: 05 July 2018
Revised Date: 18 February 2019
Available Online: 05 October 2019


摘要
摘要:本文介绍一种采用大功率稳流发射、低噪声测量、宽频带接收以及分布式同步等技术，自主研制的分布式多功能电磁法仪器系统.系统包括大功率电磁法发射机、分布式电磁法接收机、磁场传感器、整流源等设备.采用ARM芯片和FPGA芯片进行发射机的整机控制和信号整形发射，采用PC104工控机和FPGA芯片进行接收机的整机控制和信号处理.在人工场源模式下实现了可控源音频大地电磁法（CSAMT）、谱激电法（SIP）和时域激电法（TDIP）等测量功能；在天然场源模式下实现了大地电磁法（MT）、音频大地电磁法（AMT）的测量功能.发射机在满功率发射的情况下连续可靠运行时间大于12 h，接收机的动态范围大于120 dB，接收机可接收信号频率范围是0.001 Hz~32 kHz.通过典型矿区的野外实验和应用，表明本系统的性能总体上达到了国际先进水平.
关键词: 大功率发射机/
分布式接收机/
磁场传感器/
多参数测量

Abstract:This paper presents a distributed multi-function electromagnetic system developed by using the technology of high-power and steady current emission, low noise measurement, broadband reception, and distributed synchronization. The system consists of a high power electromagnetic transmitter, distributed electromagnetic receiver, magnetic field sensor, rectifier source and other equipment. It uses ARM chip and FPGA chip to control the transmitter and signal shaping, and PC104 industrial control computer and FPGA chip to complete the receiver's whole machine control and signal processing. On a artificial field source model, the measurement functions of controllable source audio-frequency magnetotelluric (CSAMT), frequency domain induced polarization (SIP) and time domain induced polarization (TDIP) are realized. On a natural source model, the measurement functions of magnetotelluric (MT) and audio magnetotelluric (AMT) are also realized. The transmitter can run for more than 12 hours in the case of full power transmission. The dynamic range of the receiver is greater than 120dB. The receiver can receive the signals from 0.001 Hz to 32 kHz. Field experiments and application to a typical mining area show that the performance of this system has reached the international advanced level overall.
Key words:High power transmitter/
Distributed receiver/
Magnetic field sensor/
Multi-parameter measurement



PDF全文下载地址:

http://www.geophy.cn/data/article/export-pdf?id=dqwlxb_15187