高峰^1,2,3,,
魏建新^1,3,,,
狄帮让^1,3,
司文朋⁴,
黄世琪^1,3
1. 油气资源与探测国家重点实验室, 中国石油大学(北京), 北京 102249
2. 地震观测与地球物理成像重点实验室, 中国地震局地球物理研究所, 北京 100081
3. CNPC物探重点实验室, 中国石油大学(北京), 北京 102249
4. 中国石化石油物探技术研究院, 南京 211103

基金项目: 国家科技重大专项（2017ZX05018-005）和国家自然科学基金（41474112）资助


详细信息

作者简介: 高峰, 男, 1988年生, 2018年获中国石油大学(北京)地质资源与地质工程专业博士学位, 现在中国地震局地球物理研究所博士后工作站从事地震衰减相关岩石物理研究.E-mail:gaofengcup@126.com

通讯作者: 魏建新, 男, 1958年生, 研究员, 博士生导师, 主要从事地震物理模拟、岩石物理学等地球物理基础理论和实验研究工作和教学.E-mail:weijx@cup.edu.cn

中图分类号: P631

收稿日期:2017-10-29
修回日期:2018-01-23
上线日期:2018-12-05

A method of seismic physical modeling for quantitative simulation of formation attenuation

GAO Feng^1,2,3,,
WEI JianXin^1,3,,,
DI BangRang^1,3,
SI WenPeng⁴,
HUANG ShiQi^1,3
1. State Key Laboratory of Petroleum Resources and Prospecting(China University of Petroleum, Beijing), Beijing 102249, China
2. Key Laboratory of Seismic Observation and Geophysical Imaging, Institute of Geophysics, China Earthquake Administration, Beijing 100081, China
3. CNPC Key Laboratory of Geophysical Exploration(China University of Petroleum, Beijing), Beijing 102249, China
4. Sinopec Geophysical Research Institute, Nanjing 211103, China


More Information

Corresponding author: WEI JianXin,E-mail:weijx@cup.edu.cn

MSC: P631

--> Received Date: 29 October 2017
Revised Date: 23 January 2018
Available Online: 05 December 2018


摘要
摘要:Q值是描述地层衰减特征的重要地震物理参数，研究Q值对提高地震资料分辨率，提高地震成像精度具有重要意义.本文从地震物理模拟中模型材料的动力学特征出发，提出了一种地层衰减定量模拟的地震物理模拟方法.通过铝样验证了衍射校正方法的准确性，利用有机玻璃实验分析了不同测量方法求取Q值的测量精度问题，从而优选测量方法；然后基于复合材料的实验数据，建立复合材料配比与各物理参数之间的函数关系，利用该函数关系指导地层衰减定量模拟.结合单层地震物理模型和近地表地震物理模型，研究了模拟地震记录及其频谱特征与野外实际情况之间的相似性，基于建立的函数关系研究分析了地层衰减定量模拟的准确性.实验结果表明，基于地震衰减定量模拟方法构建近地表地震物理模型时，模型中模拟参数不仅与设计参数保持很好的一致性，同时具有很高的准确性，模拟地层的频谱衰减特征与野外地层保持一致.
关键词: Q值/
地层衰减/
定量模拟/
地震物理模拟

Abstract:The Q value is an important seismic physical parameter to describe attenuation characteristics of formation. It is of great significance to improvement of resolution of seismic data and accuracy of seismic imaging. In this paper, a seismic physical modeling method for the quantitative simulation of formation attenuation is proposed based on dynamic characteristics of attenuation materials. Firstly, the accuracy of the diffraction correction method is verified with the aluminum. Secondly the stability and accuracy of different measurements are analyzed through experiments on lucite, so as to select a preferable method for Q estimation. Then, the function between the mass ratio of compound materials and physical parameters is established based on experimental data, which can be used in quantitative simulation of formation attenuation. Combined with a single-layer seismic physical model and a near-surface seismic physical model, the similarities between the field situation and simulated seismic records as well as its spectral characteristics are studied. In addition, the accuracy of quantitative simulation of formation attenuation is analyzed by comparing the differences between the material Q values and the inversion Q values of the physical model. The results show that the simulation parameters of the model are not only consistent with the design ones, but also of high accuracy. Meanwhile, the attenuation characteristics of the simulated formation also show consistency with those of the formation in the field.
Key words:Q value/
Formation attenuation/
Quantitative simulation/
Seismic physical modeling



PDF全文下载地址:

http://www.geophy.cn/data/article/export-pdf?id=dqwlxb_14803