于翔，男，教授，博士生导师。现任材料物理教研室主任。


济南大学（原山东省建筑材料工业学院）无机材料科学与工程系硅酸盐工程专业，本科，学士
山东威海市瓷厂研究所，工程师、实验室主任
中国地质大学（北京）工程技术学院表面工程研究室合作研究
中国地质大学（北京），教授、博士生导师。
中国地质大学（北京）工程技术学院地质工程硕博连读工学博士
表面工程研究所/工程技术学院机械工程教研室留校任讲师
表面工程研究所/工程技术学院副教授、硕士生导师
表面工程研究所/工程技术学院教授、博士生导师
2015.02—至今材料科学与工程学院教授、博士生导师
期间
香港城市大学机械制造与工程管理系访问
香港城市大学机械制造与工程管理系高级访问
德国FraunhoferIST国家公派高级访问


从事气相沉积薄膜、机械、摩擦学和地质工程等领域的教学和科研工作，主要研究方向为：材料物理、摩擦学表面工程和气相沉积。主持和参加科技部重大国际合作项目、国家自然科学基金项目、新世纪优秀人才支持计划等科研项目30余项；申报国家专利40余项；主编国际专著1部，参编国际专著2部；发表论文70余篇，其中40余篇为SCI收录，30余篇为EI论文。多次担任国内外重要学术会议组织委员或分会主席，为国内外十几家学术期刊审稿专家。现任中国机械工程学会摩擦学分会、表面工程分会特种薄膜与涂层专业委员会委员和中国地质学会非开挖专业委员会常务委员。博士学位论文获2009年度“全国优秀博士学位论文”和2008年度“北京市优秀博士学位论文”；研究成果获第十一届青年地质科技奖—金锤奖（2008年）并在2008年入选教育部新世纪人才计划。
中国地质大学（北京）九三学社支社委员、海淀区政协委员。

Email:yuxiang@cugb.edu.cn

---

2001年以来部分论文：
一、SCI
[1]Xiang Yu*, Xi-an Zhao, Ya-yun Liu, Meng Hua,and Xin Jiang. The Effects of Ti Carbonization on the Nucleation and Oriented Growth of Diamond Films on Cemented Carbide. ACS Applied Materials and Interfaces, 2014,6(7): 4669-4677 (SCI, 2014 IF=5. 900)
[2]Yu Xiang*, Ai Jie, Liu Yang, Wang Chengbiao. (2014): Exploring tribological behavior of diamond film by hot-filament chemical vapour deposition on tungsten carbide for lunar exploration. Vacuum (Rapid Communication), 100, 41-45. (SCI, 2013 IF=1.317)
[3]Chao Zhang, Xiang Yu*, Xingju Liu, Lei Zhang. (2014): Design of a microbial contamination detector and analysis of error sources in its optical path. Pakistan Journal of Pharmaceutical Sciences, 27 (3): 671-677. (SCI, 2013 IF=0.947)
[4]Yue Qin, Xiang Yu* Guanghui Leng, Zhang Lei, Yulong Ding. Diatomite matrix based composite phase change thermal storage materials at high temperature. Materials research innovation. 2014, 18 (2): 453-456. (SCI, 2013 IF=0.321)
[5]Q. S. Zhang, M. Deng, J. Ai, L. Zhang, J. Y. Huang. Exploring Cr/CrNx/CryCz/Cr-DLC film for geophysical prospecting. Materials research innovation. 2014, 18 (2): 478-481. (SCI, 2013 IF=0.321)
[6]Ning, Z.W., Yu, X.*, Hua, M., Wang, C.B. (2013): Influence of copper content and nanograin size on toughness of copper-containing diamond-like carbon films. Material Research Innovations, 17(s1): 66-69. (SCI, 2011 IF=0.409)
[7]Ren, Y., Yu, X.*, Li, W., Ouyang, S, Wang, C.B. (2013): Influence of titanium ion implantation on nucleation of diamond films on tungsten carbide. Material Research Innovations, 17(s1): 12-15. (SCI, 2011 IF=0.409)
[8]Yu, X.*, Yang, X., Wang, C.B, Hua, M., Fu, Z.Q. (2013): Investigation of surface defects and parameter optimization of chromium oxide films in a mid-frequency dual-magnetron sputtering. Surface and Coatings Technology, 228 (1): s19-s23. (SCI, 2011 IF=1.867).
[9]Liu, Y., Yu, X. *, Ma, L., Wang, C. B., Hua, M. (2013): Influence of chromium buffer layer on Cr/ta-Ccomposite films. Surface Engineering, 29 (4): 276-280. (SCI, 2012 IF=1.545)
[10]Yu, X.*, Ning, Z.W., Hua, M., Wang, C.B. (2013): Influence of silver incorporation on toughness improvement of diamond-like carbon film prepared by ion beam assisted deposition. The Journal of Adhesion, 89, 1-16. (SCI, 2011 IF=1.310)
[11]Yu, X. *, Liu Y, Ma L, Yang G, Wang, C.B. (2013): Investigation of thick CVD diamond film with SiC interlayer on tungsten carbide for possible usage in geologic explorations. Vacuum (Rapid Communication) 94, 53-56. (SCI, 2011 IF=1.317)
[12]Yu, X.*, Qin, Y., Wang, C.B., Yang, Y.Q., Ma, X.C. (2013): Effects of nanocrystalline silver incorporation on sliding tribological properties of Ag-containing diamond-like carbon films in multi-ion beam assisted deposition. Vacuum, 89, 82-85. (SCI, 2011 IF=1.317)
[13]Xiang Yu*, Zhenwu Ning, Meng Hua, Chengbiao Wang and Fuzhai Cui. (2013): Mechanical and Biomedical Properties of Copper-Containing Diamond-Like Carbon Films on Magnesium Alloy. Journal of Materials Chemistry B, 1(37), 4773-4780. (SCI, 2014 IF=6.626)
[14]Yang Xi, Yu Xiang*, Yonghui Wang, Wen Shu, and Meng Hua. (2013): Influence of three classic chromium-based transitions on the behavior of film/substrate interface in diamond-like carbon films. Applied Physics Letters, 103, 231607. (SCI, 2012 IF=3.794)
[15]Yu Xiang, Wang Chengbiao, Hua Meng, Liu Yang, Yu Deyang. Influence of Cr content and nanograin size on microstructure, mechanical and sliding tribological behavior of hard Cr-DLC films. Journal of Nanoscience and Nanotechnology, 2010, 10 (8): 5379-5382.
[16]Yu, X.*, Wang, C. B., Hua, M., Liu, Y. and Yu, D. Y. (2009): Influence of Cr content and nanograin size on microstructure, mechanical and sliding tribological behavior of hard Cr-DLC films. Journal of Nanoscience and Nanotechnology (Accepted on March 2008). (IF = 2.194)
[17]Wang, C. B., Yu, X.* and Hua, M. (2009):Microstructure and mechanical properties of Ag-containing diamond-like carbon films in mid-frequency dual-magnetron sputtering. Applied Surface Science. (In press) (IF = 1.576)
[18]Yu, X.*, Hua, M. and Wang, C. B. (2009): Influence of Ag content and nanograin size on microstructure, mechanical and sliding tribological behavior of Ag-DLC films. Journal of Nanoscience and Nanotechnology 2009; 9 (11): 6366-6371. (IF = 2.194)
[19]Yu, X.*, Wang, C.B., Hua, M., Ma, S. L., Liu, Y. and Yu, D. Y. (2007): Enhancing hardness of arc-ion-plated nanocrystallite TiN film. Nanotechnology 18, 355710 (5p). (IF = 3.037)
[20]Yu, X.*, Wang, C.B., Hua, M., Tam, P., Liu, Y. and Yu, D. Y. (2007): Adherent nano-superhard titanium nitride film and its forming mechanism in multi-arc ion-plating system. Surface Reviews and Letters 14(4), 1027-1031. (IF = 0.439)
[21]Yu, X.*, Hua, M., Wang, C.B., Fu, Z. Q. and Liu, Y. (2007): Investigation of Ti/TiN multilayered films in a reactive mid-frequency dual-magnetron sputtering. Applied Surface Science, 2007, 253(7), 3705-3711. (IF = 1.436)
[22]Yu, X.*, Zhang, X., Wang, C.B., Liu, F. T. and Fu, Z.Q. (2007): Structural, mechanical and frictional properties of tetrahedral amorphous carbon film by filtered cathodic vacuum arc system. Surface and coating technology 201(9-11), 4995-4998. (IF = 1.559)
[23]Zhang, X.*, Wu, Z. L., Wu, X. Y., Qin, L. Z., Yu, X., Xu, Y. Z. and Zhang, H. X. (2007): Structure and properties of tetrahedral amorphous carbon films implanted with Ti ion. Surface and Coatings Technology 201(9-11), 5219~5222. (IF = 1.559)
[24]Yu, X.*, Wang, C.B., Liu, Y. and Yu, D. Y. (2006): A study of hard diamond-like carbon films in mid-frequency dual-magnetron sputtering. Diamond and Related Materials 15 (9), 1223-1227. (IF = 1.935)
[25]Yu, X.*, Wang, C.B., Liu, Y. and Yu, D. Y. (2006): TiN/Ti multilayer films synthesized by mid-frequency dual-magnetron sputtering. Acta Metallurgica Sinica (Chinese) 42 (6), 662-666. (IF = 0.414)
[26]Yu, X.*, Wang, C.B., Liu, Y., Yu, D. Y. and Fu, Z.Q. (2006): Cr-doped DLC films in three mid-frequency dual-magnetron sputtering modes. Surface and coating technology 200(24), 6765-6769. (IF = 1.559)
[27]Yu, X.*, Wang, C.B., Liu, Y., Yu, D. Y. (2006): Resent developments in magnetron sputtering. Plasma Science and Technology 8(3), 337-343. (IF = 0.331)
[28]Yu, X.*, Wang, C.B. and Yu, D. Y. (2005): Ta-C film deposited on substrate AISI 440 to improve its tribological property. Journal of materials sciences letters 40(12), 3301-3303. (IF=0.999)
[29]Yu, X.*, Liu, Y., Wang, C.B., Lu, X.C. and Yu, D. Y. (2005): Investigation on preparation and properties of thick DLC film in medium-frequency dual-magnetron sputtering, Vacuum 80(4), 324-331. (IF = 0.834)
[30]Hua, M., Yu, X.*, Yu, J. F. and Wang, C.B. (2005): Effect of dc negative-bias and silicon introduction on performance of Si-B-N composite film by RF-PECD technique, Applied Surface Science 245(1-4), 45-50. (SCI, EI, IF = 1.436)
[31]Wang, C.B., Yu, X.*, Weng, L. J. and Yu, D. Y. (2005): Investigation of failure mechanism and modification for film-lubricated precise angular-contact ball bearing, Vacuum 77(2), 187-193. (SCI, EI, IF = 0.834)
[32]Yu, X.*, Zhang, X., Wang, C.B., Hua, M. and Wang, L. G. (2004): A tribological study on tetrahedral amorphous carbon films prepared by filtered cathodic vacuum arc technique. Vacuum 75(3), 231-236. (SCI, EI, IF = 0.834)
[33]Yu, X.*, Wang, C.B., Jiang, G. W., Hua, M. and Liu, H. S. (2004): Tribological mechanism and property of 9Cr18 friction pair at atmosphere and in vacuum. Vacuum 72(4), 461-466. (SCI, EI, IF = 0.834)
二、EI
[1]于翔，王成彪，孙晓军. 9Cr18和GCr15球-盘摩擦副摩擦学性能分析. 材料热处理学报, 2002,23(4):47~50.
[2]江功武, 于翔, 王成彪. 类金刚石碳膜的研究进展. 金属热处理，2003, 12: 1~5.
[3]于翔，王成彪，江功武. Si-B-N复合薄膜的结构及摩擦学性能研究. 摩擦学学报，2004，24(2): 119~122.
[4]于翔, 张旭, 王成彪，刘兴举，傅玉娜. 四面体无定型无氢非晶碳膜的制备及其摩擦学性能研究, 摩擦学学报, 2005, 25(2): 135~139.
[5]刘兴举, 王成彪，于翔. 多层氮化铬薄膜的制备及其摩擦学性能研究. 金属热处理，2005，30(5): 1~4.
[6]于翔，王成彪，刘阳，于德洋. 中频磁控溅射法制备厚类金刚石碳膜.润滑与密封, 2006,10:25~28.
[7]于翔, 刘阳, 王成彪, 于德洋.新型等离子体磁控溅射技术.金属热处理, 2007, 32(2): 30~34. （EI收录）
[8]于翔，王成彪，刘阳，于德洋. 中频对靶磁控溅射硬制类含铬金刚石薄膜. 材料热处理学报, 2006, 27 (2): 27~30.
[9]于翔, 王成彪, 刘阳, 于德洋.真空阴极多弧离子镀沉积纳米超硬氮化钛薄膜.材料热处理学报, 2008, 33(12): 49~52.
[10]Yu, X.*, Yang, Y.Y. and Wang, C. B. Effect of pulsed substrate bias on evolution of surface morphology and sp3 hybridization degree of Ag-DLC films in a mid-frequency dual-magnetron sputtering, 2009, Advanced Materials Research, accepted.

三、ISTP
[1]于翔, 王成彪.9Cr18和GCr15球-盘摩擦副摩擦学性能分析. 中国地质大学(北京) 2002年研究生学术交流会. 北京，2002年6月.
[2]Cheng-biao Wang, Xiang Yu, Jun-feng Yu. A fundamental study of Si-B-N composite film by duplex treatment. 庆祝中国地质大学建校50周年博士论坛论文集：124~132.北京，2002年11月.
[3]于翔, 王成彪.纳米材料和纳米类金刚石薄膜. 中国地质大学(北京) 2003年研究生学术交流会. 北京，2003年12月.
[4]于翔, 王成彪. 在AISI 440基体上合成ta-C碳膜及其摩擦学性能分析. 中国地质大学(北京) 2004年研究生学术交流会. 北京，2004年11月.
[5]于翔, 张旭, 王成彪. 无氢非晶碳膜的制备及其摩擦学性能研究. 北京大学“2004年全国博士生学术论坛” 地球系统科学分论坛论文集: 36~44. 北京，2004年8月.
[6]于翔, 任兆兴, ,刘阳, 王成彪, 于德洋. 新型等离子体磁控溅射技术. 第十二届全国等离子体科学技术会议论文集: 119. 上海, 2005年8月.
[7]于翔, 刘阳, 王成彪, 于德洋. 三种中频对靶磁控溅射含铬DLC膜的综合摩擦学性能比较. TFC`05全国薄膜技术学术研讨会论文摘要集：56. 大连, 2005年9月.
[8]于翔, 刘阳, 王成彪, 于德洋. 三种中频对靶磁控溅射含铬类金刚石膜的性能比较. 第六届全国表面工程学术会议论文集：.兰州，2006年8月.
[9]Yu, X.*, Liu, Y., Wang, C. B. and Yu, D. Y. (2006): An adherent superhard TiN film deposited by vacuum cathode multi-arc ion-plated system. 49th Annual Society of Vacuum Coater (SVC) Technical Conference, Washington DC, April 2006, 32-37 (In America)
[10]Liu, Y., Yu, X.*, Wang, C. B. and Yu, D. Y. (2006): A poisoning-resistant reactive magnetron sputtering technique and its industrialized applications. 49th Annual Society of Vacuum Coater (SVC) Technical Conference, Washington DC, April 2006, T18 (In America).
[11]Yu, X.*, Wang, C. B. and Peng, Z. J. Improving Ag-DLC film adherence on high-speed steel by varying Ag contents in a mid-frequency dual-magnetron sputtering. 2009, The Sixth China International Conference on High-Performance Ceramics (CICC-6), Harbin, China. (Invited Speaker, Chair)

---

[1]2004.2-2006.2 清华大学摩擦学国家重点实验室开放基金资助项目(Kf04.02)：纳米氮化碳及其多层薄膜的合成及失效机理的探索研究
[2]2005.1-12 国家自然科学基金(**)：DLC基纳米复合多层梯度薄膜的合成及其摩擦学性能研究
[3]2005.12-2006.12中国地质大学(北京) 科学钻探国家专业实验室开发研究基金项目(200502)：新型纳米多层类金刚石工具涂层的研究
[4]2006.12-2009.12 国际科技合作重大计划重大项目（2006DFB51260）：超低摩阻磨耗DLC梯度厚膜制备技术及其特种应用研究
[5]2006.12-2007.12中国地质大学(北京) 科学钻探国家专业实验室开发研究基金项目(200604)：用于钻探机具的类金刚石工具涂层
[6]2007.4-2008.2香港特区政府创新基金Strategic Research Grant (CityU: **)
[7]2008.3-2008.9 香港特区政府创新基金Strategic Research Grant (CityU: **)
[8]2009.6-2012.6 教育部新世纪优秀人才支持计划
[9]2010.1-2012.12中央高校基本业务费（2010ZY40）：铜含量及纳米晶粒对含铜类金刚石薄膜结构、力学和摩擦学性能的影响
[10]2011.1-2013.12国家自然科学基金（**）：用载能离子调控纳米银晶粒来改善硬质类金刚石薄膜韧性

---

国际专著

[1]Yu Xiang*, Wang Cheng-biao, Hua Meng. Chapter 3: Hard Cr-containing diamond-like carbon films in mid-frequency dual-magnetron sputtering. Diamond and Related Materials Research. New York: Nova Science Publishers, 2008, ISBN: 978-1-60456-145-6.
[2]Yu Xiang*, Wang Cheng-biao, Zhang Xu. Chapter 12: Superhard tetrahedral amorphous carbon films in filtered cathodic vacuum arc. Diamond and Related Materials Research. New York: Nova Science Publishers, 2008, ISBN: 978-1-60456-145-6.
[3]Yu, X.*, Wang, C.B., Hua, M., Liu, Y. and Ma, S. L. Chapter 12: Nanocrystallite Superhard Titanium Nitride Film in Multi-Arc Ion Plating. Nanotechnology: Nanofabrication, Patterning, and Self Assembly. New York. Nova Science Publishers, 2010, ISBN: 978-1-60692-162-3.
[4]Cong Qiu-Zi, Yu Xiang*, He Li. Multi-functional Two-dimensional and Tri-dimensional X-Ray Diffractometry. Bentham Science Publishers, 2011, ISBN: 978-1-60805-076-5, 1-247.

---

[1] 中国地质大学（北京）2004年研究生学术交流会 一等奖
[2] 中国地质大学（北京）第十一届研究生学术报告会 一等奖
[3] 中国地质大学（北京）2004-2007年优秀博士论文扶持基金获得者
[4] 2007年校级优秀博士学位论文
[5] 2008年北京市优秀博士学位论文
[6] 2008年度教育部“新世纪优秀人才支持计划”入选者
[7] 第十一届青年地质科技奖—金锤奖
[8] 2009年全国优秀博士学位论文

---

部分授权专利：

[1]于翔, 刘阳, 于德洋, 王成彪. 一种含铬类金刚石薄膜制备技术. 中国发明专利, ZL3.1.
[2]于翔, 刘阳, 于德洋, 王成彪. 一种硬质耐磨保护薄膜及其制备方法. 中国发明专利, ZL8.7.
[3]于翔, 罗志航, 王成彪, 付志强, 彭志坚, 岳文, 杨义勇. 摩擦磨损试验机附件结构. 实用新型专利, ZL0.8.

---

教学：
（1）本科生：《工程材料》、《机械工程专业英语》、《机械与电气安全工程》、《耐磨材料及性能测试》、《陶瓷工艺学》
（2）研究生：《材料科学与技术进展》、《耐磨材料及性能测试》、《陶瓷工艺学》

招生：
（1）硕士研究生：材料科学与工程、机械工程、地质工程
（2）博士研究生或博士后：材料科学与工程、地质工程