个人简历

2001年毕业于北京航空航天大学飞行器动力工程系获学士学位；2009年毕业于韩国INHA大学获博士学位。
主要研究方向为航空发动机结构适航与结构故障诊断。针对航空发动机的结构适航性设计、符合性验证技术、结构损伤故障诊断与预测开展研究工作，解决航空发动机健康诊断中结构安全性关键问题。在相关领域共发表论文30余篇，授权国家专利4项，主持/参与相关课题研究近30项，发表中文译著1本，指导硕士生10余人。

教育经历

[1] 2003.03 - 2009.02
INHA University | 机械工程系 | 博士学位
[2] 1997.09 - 2001.07
北京航空航天大学 | 飞行器动力工程系 | 学士学位

工作经历

[1] 2011.07-至今
北京航空航天大学 | 交通科学与工程学院/飞行器适航工程系 | 讲师、副教授
[2] 2009.06-2011.06
北京航空航天大学 | 交通科学与工程学院 | 博士后
[3] 2001.07-2003.02
浙大中控技术有限公司 | 设计中心 | 技术员

研究方向

[1] 航空发动机结构故障诊断与预测
[2] 航空发动机结构适航

---

研究领域

当前位置: 中文主页 >> 研究领域

1、航空发动机结构故障诊断
2、航空发动机结构适航

---

开授课程

当前位置: 中文主页 >> 开授课程

[1]航空发动机适航技术原理
[2]金属与复合材料力学分析

共2条1/1首页上页下页尾页

---

科研项目

当前位置: 中文主页 >> 科研项目

[1] 结构适航审定技术研究
[2] 适航符合性技术研究
[3] 多场耦合作用下的航空发动机涡轮盘结构损伤与安全性研究
[4] 复杂载荷作用下的限寿件符合性评估技术
[5] 航空关键件过渡态载荷技术研究
[6] 记忆合金阻尼特性分析及阻尼器设计研究
[7] 镍钛合金丝阻尼机理分析及应用

共7条1/1首页上页下页尾页

---

论文

当前位置: 中文主页 >> 论文

[1] Qiang Pan, Ying Liu, Rui Zhou, Hong Wang, Haibing Chen*, Tian He, An automatic abrupt signal extraction method for fault diagnosis of aero-engines, Journal of Mechanical Science and Technology, 2019 (Accepted)
[2] Qiang Pan, Rui Zhou, Juying Su, Tian He*, Zebang Zhang, Automatic localization of the rotor-stator rubbing fault based on acoustic emission method and higher-order statistics, Journal of Mechanical Science and Technology, 2019, 33(2): 513-524.
[3] Qiang Pan, Zheyuan Zhang, Xiaofeng Liu, Design of H∝ Output Feedback Controller for Gas Turbine Engine Distributed Control with Random Packet Dropouts, IEEE Access, 2019, 7:1030-1039.
[4] Changrui Chen, Tian He, Dengyun Wu, Qiang Pan*, Hong Wang, Xiaofeng Liu, A Fault Diagnosis Method for Satellite Flywheel Bearings Based on 3D Correlation Dimension Clustering Technology, IEEE Access, 2018, 6: 78483-78492.
[5] Dayong Hu, Yongzhen Wang, Linwei Dang, Qiang Pan*, Energy absorption characteristics of composite tubes with different fibers and matrix under axial quasi-static and impact crushing conditions, Journal of Mechanical Science and Technology, 2018, 32 (6): 2587-2599.
[6] Fan Yang, Qiang Pan, Tian He, Jianghao Wu, Yanlei Gao, 2018, A Study of structural design of flapping rotary wing aircraft, 6th Annual International Conference on Material Science and Engineering, 2018, Suzhou, Jiangsu, China, 397(1).
[7] Xiandong Liu, Denghong Xiao, Yingchun Shan, Qiang Pan, Tian He*, Yong Gao, Solder joint failure localization of welded joint based on acoustic emission beamforming, Ulstrasonics, 2017, 74: 221-232.
[8] Qiang Pan, Tian He*, Denghong Xiao, Xiandong Liu, Design and damping analysis of a new eddy current damper for aerospace applications, Latin American Journal of Solids and Structures, 2016, 13(11): 1997-2011.
[9] Tian He, Wu Ye, Qiang Pan*,An automatic abrupt information extraction method based on singular value decomposition and higher-order statistics, Measurement Science and Technology, 2016, 27(2): 025007.
[10] Qiang Pan, Tian He*, Yingchun Shan, Xiandong Liu, Fault diagnosis of gears based on local mean decomposition combing with kurtosis, Journal of Vibroengineering, 2014, 16(6): 2639-2648.
[11] Tian He*, Denghong Xiao, Qiang Pan, Xiandong Liu, Yingchun Shan, Analysis on accuracy improvement of rotor–stator rubbing localization based on acoustic emission beamforming method, Ultrasonics, 2014, 54: 318-329.
[12] Denghong Xiao, Tian He*, Qiang Pan, Xiandong Liu, Jin Wang, Yingchun Shan, A novel acoustic emission beamforming method with two uniform linear arrays on plate-like structures, Ultrasonics, 2014, 54: 737-745.
[13] Qiang Pan, Denghong Xiao, Tian He, A study on fault diagnosis of gears based on local mean decomposition method, Advanced Materials Research, 2013, 683: 899-902.
[14] Denghong Xiao, Tian He*, Qiang Pan, Xiandong Liu, Yingchun Shan, Impulsive noise cancellation of acoustic emission signal based on iterative mathematical morphology filter, Journal of Vibroengineering, 2013, 15(4): 1752-1764.
[15] Tian He, Qiang Pan*, Yaoguang Liu, Xiandong Liu, Dayong Hu, Near-field Beamforming Analysis for Acoustic Emission Source Localization, Ultrasonics, 2012, 52: 587-592.
[16] Tian He, Xiandong Liu, Ying Chun Shan, Qiang Pan, Rolling Element Defect Diagnosis Based on Local Mean Decomposition, Applied Mechanics and Materials, 2011, 117-119: 33-37.
[17] Tian He, Qiang Pan*, Xiandong Liu, Yingchun Shan, AE Beamforming Method for Damage Inspection of Aircraft Structures, Procedia Engineering, 2011, 17: 297-302.
[18] 张曙光，柯鹏，潘强，陈海兵，适航性:航空器合格审定引论，北京航空航天大学出版社，第1版，324千字，2011年7月
[19] Qiang Pan, Shuiting Ding and Shuguang Zhang, Fatigue and Wear Resistant Properties of NiTi Alloys for Aircraft Applications, Proceeding of the 1st International Symposium on Aircraft Airworthiness, Beijing China, 2009, 246-249.
[20] Qiang Pan and Chongdu Cho, Damping Property of Shape Memory Alloys, Proceeding of 17th International Metallurgical & Material Conference, Hradec nad Moravicí Czech Republic, 2008, 99: 1-8.

共25条1/2首页上页下页尾页页

---

荣誉及奖励

当前位置: 中文主页 >> 荣誉及奖励
[1]教学成果三等奖
[2]优秀生产实习团队指导教师
[3]优秀班主任

共3条1/1首页上页下页尾页